Trio/FreeAPS/Sources/Localizations/Main/nl.lproj/Localizable.strings

/*
  Localizable.strings
  FreeAPS X
*/
/* -------------------------------- */
/* Bolus screen when adding insulin */
"Add insulin without actually bolusing" = "Insuline toevoegen zonder daadwerkelijke bolus";

/* Add insulin from source outside of pump */
"Add %@ without bolusing" = "Voeg %@ toe zonder bolus";

"Bolus" = "Bolus";

"Close" = "Sluiten";

/* Continue after added carbs without bolus */
"Continue without bolus" = "Verdergaan zonder bolus";

/* Header */
"Enact Bolus" = "Bolus geven";

/* Button */
"Enact bolus" = "Bolus geven";

/*  */
"Insulin recommended" = "Voorgestelde insuline";

/*  */
"Insulin required" = "Benodigde insuline";

/* Bolus screen */
"Recommendation" = "Advies";

/* Button */
"Clear" = "Wissen";

/* Button */
"Done" = "Bevestig";

/*  */
"Wait please" = "Wachten";

/*  */
"Agree and continue" = "Akkoord en doorgaan";

/* Enacted at a date */
"Enacted at %@" = "Toegediend op %@";

/* Home title */
"Home" = "Hoofdmenu";

/* Looping in progress */
"looping" = "Loopen";

/* min ago since last loop */
"min ago" = "minuten geleden";

/* Status Title */
"No suggestion" = "Geen suggestie";

/* Replace pod text in Header */
"Replace pod" = "Vervang Pod";

/* Suggested at a date */
"Suggested at %@" = "Voorgesteld op %@";

/* Add carbs screen */
"Add Carbs" = "Koolhydraten toevoegen";

/* Add carbs header and button in Watch app. You can skip the last " " space. It's just for differentiation */
"Add Carbs " = "Koolhydraten toevoegen ";

/*  */
"Amount Carbs" = "Hoeveelheid koolhydraten";

/* Grams unit */
"grams" = "gram";

/*  */
"Carbs required" = "Koolhydraten benodigd";

/* */
"Are you sure?" = "Weet u het zeker?";

/* Bottom target temp */
"Bottom target" = "Ondergrens doel";

/* Cancel preset name */
"Cancel" = "Annuleer";

/*  */
"Cancel Temp Target" = "Annuleer tijdelijk doel";

/* Custom temp target */
"Custom" = "Aangepast";

/*  */
"Date" = "Datum";

/*  */
"Delete" = "Verwijderen";

/* Delete preset temp target */
"Delete preset \"%@\"" = "Voorinstelling \"%@\" verwijderen";

/* Duration of target temp or temp basal */
"Duration" = "Duur";

/*  */
"Enact Temp Target" = "Start tijdelijk doel";

/*  */
"Enter preset name" = "Voer naam voorinstelling in";

/* Preset name */
"Name" = "Naam";

/* minutes of target temp */
"minutes" = "minuten";

/*  */
"Presets" = "Voorkeursinstellingen";

/* Save preset name */
"Save" = "Opslaan";

/*  */
"Save as preset" = "Opslaan als tijdelijk programma";

/* Upper temp target limit */
"Top target" = "Bovengrens doel";

/*  Temp target set for ... minutes */
"for" = "voor";

/*  Temp target set for ... minutes */
"min" = "min";

/*  */
"Autotune" = "Autotune";

/*  */
"Basal profile" = "Basaal profiel";

/*  */
"Carb ratio" = "Koolhydraten ratio";

/*  */
"Delete autotune data" = "Verwijder autotune-gegevens";

/*  */
"Run now" = "Nu uitvoeren";

/*  */
"Last run" = "Laatste berekening";

/*  */
"Sensitivity" = "Gevoeligheid";

/*  */
"Use Autotune" = "Autotune gebruiken";

/* Add profile basal */
"Add" = "Toevoegen";

/*  */
"Basal Profile" = "Basaal profiel";

/* Rate basal profile */
"Rate" = "Waarde";

/*  */
"Save on Pump" = "Opslaan op pomp";

/*  */
"Saving..." = "Opslaan...";

/*  */
"Schedule" = "Schema";

/*  */
"starts at" = "Begint om";

/* Time basal profile */
"Time" = "Tijd";

/* */
"Calculated Ratio" = "Gecalculeerde ratio";

/* Carb Ratios header */
"Carb Ratios" = "Koolhydraten ratio's";

/*  */
"Ratio" = "Ratio";

/*  */
"Autosens" = "Gevoeligheidsdetectie (Autosens)";

/*  */
"Calculated Sensitivity" = "Berekende gevoeligheid";

/*  */
"Insulin Sensitivities" = "Insuline gevoeligheden";

/* */
"Sensitivity Ratio" = "Gevoeligheid ratio";

/*  */
"Dismiss" = "Negeren";

/*  */
"Important message" = "Belangrijk bericht";

/*  */
"Amount" = "Hoeveelheid";

/* */
"Cancel Temp Basal" = "Annuleer tijdelijke basaal";

/* Enact
Enact a temp Basal or a temp target */
"Enact" = "Uitvoeren";

/* */
"Manual Temp Basal" = "Handmatige tijdelijke basaal";

/* Allow uploads tp NS */
"Allow uploads" = "Uploaden toestaan";

/* API secret in NS */
"API secret" = "API code";

/* Connect to NS */
"Connect" = "Verbinden";

/* Connected to NS */
"Connected!" = "Verbonden!";

/* Connecting to NS */
"Connecting..." = "Verbinden...";

/*  */
"Invalid URL" = "Ongeldige URL";

/*  */
"Local glucose source" = "Lokale glucose bron";

/* Header */
"Nightscout Config" = "Nightscout configuratie";

/*  */
"Port" = "Poort";

/*  */
"URL" = "URL";

/**/
"Use local glucose server" = "Lokale glucose server gebruiken";

/*  */
"Edit settings json" = "Bewerk instellingen json";

/* */
"Glucose units" = "Glucose eenheid";

/*  */
"Preferences" = "Voorkeuren";

/* Recommended Insulin Fraction in preferences */
"Recommended Insulin Fraction" = "Aanbevolen insuline fractie";

/* Do you want to show bolus screen after added carbs? */
"Skip Bolus screen after carbs" = "Sla bolus scherm over na koolhydraten";

/* Allow remote control from NS */
"Remote control" = "Controle op afstand";

/* Add Medtronic pump */
"Add Medtronic" = "Medtronic toevoegen";

/* Add Omnipod pump */
"Add Omnipod" = "Omnipod toevoegen";

/* Add Simulator pump */
"Add Simulator" = "Simulator toevoegen";

/* Insulin model */
"Model" = "Model";

/*  */
"Pump config" = "Pomp configuratie";

/*  */
"Delivery limits" = "Toediening limieten";

/*  */
"Duration of Insulin Action" = "DIA (Duur van Insuline Activiteit)";

/* hours of duration of insulin activity */
"hours" = "uur";

/* Max setting */
"Max Basal" = "Max Basaal";

/* Max setting */
"Max Bolus" = "Max. bolus";

/* */
"Pump Settings" = "Pomp instellingen";

/* Insulin unit per hour */
"U/hr" = "E/uur";

/* Unit in number of units delivered (keep the space character!) */
" U" = " E";

/* /Insulin unit */
"/U" = "/E";

/* Insulin unit */
"U" = "E";

/* Unit per hour with space */
" U/hr" = " E/uur";

/* Number of units per hour*/
"%@ U/hr" = "%@ E/uur";

/* Number of units insulin delivered */
"%@ U" = "%@ E";

/*Carb ratio unit */
"g/U" = "g/E";

/* grams */
" g" = " gr";

/* The short unit display string for grams */
"g" = "gr";

/* when 0 U/hr */
"0 U/hr" = "0 E/uur";

/* abbreviation for days */
"d" = "d";

/* abbreviation for hours */
"h" = "u";

/* abbreviation for minutes */
"m" = "m";

/*  */
"Closed loop" = "Gesloten loop";

/* */
"Configuration" = "Instellingen";

/* */
"Devices" = "Apparaten";

/*  */
"Pump" = "Pomp";

/*  */
"Services" = "Diensten";

/*  */
"Settings" = "Instellingen";

/* 2 log files to share */
"Share logs" = "Deel Log";

/* Upper target */
"High target" = "Bovengrens doel";

/* Lower target */
"Low target" = "Ondergrens doel";

/*  */
"Target Ranges" = "Streefdoel";

/* When bolusing */
"Bolusing" = "Bolussen";

/* */
"Pump suspended" = "Pomp uitgeschakeld";

/* */
"Middleware" = "Middleware";

/* Header */
"History" = "Geschiedenis";

/* CGM option */
"Upload glucose to Nightscout" = "Upload glucose naar Nightscout";

/* Type of CGM or glucose source */
"Type" = "Type";

/* CGM */
"CGM" = "CGM";

/* CGM Transmitter ID */
"Transmitter ID" = "Zender ID";

/* Other CGM setting */
"Other" = "Anders";

/* Whatch app alert */
"Set temp targets presets on iPhone first" = "Stel eerst tijdelijke doelen voorinstelling op iPhone in";

/* Updating Watch app */
"Updating..." = "Updaten...";

/* Header for Temp targets in Watch app */
"Temp Targets" = "Tijdelijk streefdoel";

/* Delete carbs from Treatments list*/
"Delete carbs?" = "Koolhydraten verwijderen?";

/* Treatments list */
"Treatments" = "Behandelingen";

/* " min" in Treatments list */
" min" = " min";

/* */
"Unable to change anything" = "Unable to change anything";


/* Calendar and Libre transmitter settings ---------------
 */
/* */
"Configure Libre Transmitter" = "Configureer Libre zender";

/* */
"Calibrations" = "Kalibraties";

/* */
"Create events in calendar" = "Voeg gebeurtenissen toe aan de kalender";

/* */
"Calendar" = "Agenda";

/* */
"Other" = "Anders";

/* */
"Libre Transmitter" = "Libre zender";

/* */
"Libre Transmitters" = "Libre zenders";

/* */
"Bluetooth Transmitters" = "Bluetooth zenders";

/* */
"Modes" = "Modes";

/* Libre 2 Direct */
"Libre 2 Direct" = "Libre 2 Direct";

/* */
"Select the third party transmitter you want to connect to" = "Selecteer de zender van de derde partij waarmee u wilt verbinden";

/* State was restored */
"State was restored" = "Staat is teruggezet";

/* The short unit display string for millimoles of glucose per liter */
"mmol/L" = "mmol/l";

/* The short unit display string for milligrams of glucose per decilter */
"mg/dL" = "mg/dl";

/* */
"Add calibration" = "Kalibratie toevoegen";

/* When adding capillary glucose meater reading */
"Meter glucose" = "Meter glucosewaarde";

/* */
"Info" = "Info";

/*v*/
"Slope" = "Toename";

/* */
"Intercept" = "Onderschep";

/* */
"Chart" = "Grafiek";

/* */
"Remove" = "Verwijder";

/* */
"Remove Last" = "Laatste verwijderen";

/* */
"Remove All" = "Alles verwijderen";

/* */
"About the Process" = "Over de werkwijze";

/* */
"Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working." = "Zorg ervoor dat uw Libre 2-sensor al geactiveerd is en klaar is met opwarmen. Als er andere apps zijn die via bluetooth verbinding maken met de sensor dan moeten deze uitgeschakeld of verwijderd worden. \n\n Je kunt maar één app gebruiken die communiceert met de sensor via bluetooth. Druk vervolgens op de knop \"koppelen en verbinden\" hieronder om het proces te starten. Houd er rekening mee dat de bluetooth-verbinding tot enkele minuten kan duren voordat deze begint te werken.";

/* */
"Pairinginfo" = "Koppeling informatie";

/* */
"PatchInfo" = "PatchInfo";

/* */
"Calibrationinfo" = "Kalibratie-info";

/* */
"Unknown" = "Onbekend";

/* */
"Not paired yet" = "Niet gekoppeld apparaat";

/* */
"Pair Sensor & connect" = "Sensor koppelen en verbinden";

/* */
"Phone NFC required!" = "Telefoon NFC vereist!";

/* */
"Your phone or app is not enabled for NFC communications, which is needed to pair to libre2 sensors" = "Je telefoon of app is niet ingeschakeld voor NFC communicatie, wat nodig is om te koppelen met libre2 sensoren";

/* Bluetooth Power Off */
"Bluetooth Power Off" = "Bluetooth uitschakelen";

/* Please turn on Bluetooth */
"Please turn on Bluetooth" = "Activeer Bluetooth a.u.b.";

/* No Libre Transmitter Selected */
"No Libre Transmitter Selected" = "Geen Libre zender geselecteerd";

/* Delete Transmitter and start anew. */
"Delete CGMManager and start anew. Your libreoopweb credentials will be preserved" = "Verwijder CGMManager en start opnieuw. De libreoopweb gegevens blijven bewaard";

/* Invalid libre checksum */
"Invalid libre checksum" = "Ongeldige libre controlesom";

/* Libre sensor was incorrectly read, CRCs were not valid */
"Libre sensor was incorrectly read, CRCs were not valid" = "Libre sensor is onjuist gelezen, CRC's waren niet geldig";

/* Glucose */
"Glucose" = "Glucosewaarde";

/* LOWALERT! */
"LOWALERT!" = "Waarschuwing Laag!";

/* HIGHALERT! */
"HIGHALERT!" = "Waarschuwing Hoog!";

/* (Snoozed)*/
"(Snoozed)" = "(Uitstellen)";

/* Glucose: %@ */
"Glucose: %@" = "Bloedsuiker: %@";

/* Transmitter: %@%% */
"Transmitter: %@%%" = "Zender: %@%%";

/* No Sensor Detected */
"No Sensor Detected" = "Geen Sensor Gevonden";

/* This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor */
"This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor" = "Dit kan een tijdelijk probleem zijn, maar controleer of uw zender stevig vastzit op uw sensor";

/* New Sensor Detected */
"New Sensor Detected" = "Nieuwe Sensor Gevonden";

/* Please wait up to 30 minutes before glucose readings are available! */
"Please wait up to 30 minutes before glucose readings are available!" = "Gelieve tot 30 minuten te wachten voordat glucosewaardes beschikbaar zijn!";

/* Invalid Glucose sample detected, try again later */
"Invalid Glucose sample detected, try again later" = "Ongeldige glucosewaarde ontdekt, probeer het later opnieuw";

/* ensor might have temporarily stopped, fallen off or is too cold or too warm */
"Sensor might have temporarily stopped, fallen off or is too cold or too warm" = "Mogelijk is de sensor tijdelijk gestopt, losgeraakt of te koud of te warm";

/* Invalid Sensor Detected */
"Invalid Sensor Detected" = "Ongeldige Sensor Gevonden";

/* Detected sensor seems not to be a libre 1 sensor! */
"Detected sensor seems not to be a libre 1 sensor!" = "Gevonden sensor lijkt geen Libre 1 sensor te zijn!";

/* Detected sensor is invalid: %@ */
"Detected sensor is invalid: %@" = "Gevonden sensor is ongeldig: %@";

/* Low Battery */
"Low battery" = "Batterij bijna leeg";

/* */
"Invalid sensor" = "Ongeldige sensor";

/* */
"Sensor change" = "Sensor wisselen";

/* */
"Sensor expires soon" = "Sensor verloopt binnenkort";

/* Battery is running low %@, consider charging your %@ device as soon as possible */
"Battery is running low %@, consider charging your %@ device as soon as possible" = "Batterijniveau is laag %@, laad uw %@ apparaat zo snel mogelijk op";

/* Extracting calibrationdata from sensor */
"Extracting calibrationdata from sensor" = "Kalibratiegegevens uit de sensor halen";

/* Sensor Ending Soon */
"Sensor Ending Soon" = "Sensor verloopt binnenkort";

/* Current Sensor is Ending soon! Sensor Life left in %@ */
"Current Sensor is Ending soon! Sensor Life left in %@" = "Sensor verloopt binnenkort! Sensor verloopt in %@";

/* */
"Libre Bluetooth" = "Libre Bluetooth";

/* */
"Snooze Alerts" = "Alarmen tijdelijk uitschakelen";

/* */
"Last measurement" = "Laatste meting";

/* */
"Sensor Footer checksum" = "Sensor voettekst controlesom";

/* */
"Last Blood Sugar prediction" = "Laatste Bloedsuikervoorspelling";

/* */
"CurrentBG" = "HuidigeBG";

/* */
"Sensor Info" = "Sensor Info";

/* */
"Sensor Age" = "Sensor leeftijd";

/* */
"Sensor Age Left" = "Sensor nog te gebruiken";

/* */
"Sensor Endtime" = "Sensor verloopt";

/* */
"Sensor State" = "Sensor status";

/* */
"Sensor Serial" = "Sensor serienummer";

/* */
"Transmitter Info" = "Zender Informatie";

/* */
"Hardware" = "Hardware";

/* */
"Firmware" = "Firmware";

/* */
"Connection State" = "Verbindingsstatus";

/* */
"Transmitter Type" = "Type zender";

/* */
"Sensor Type" = "Type Sensor";

/* */
"Factory Calibration Parameters" = "Fabriekskalibratie voor Parameters";

/* */
"Valid for footer" = "Geldig voor voettekst";

/* */
"Edit calibrations" = "Kalibraties bewerken";

/* */
"edit calibration clicked" = "bewerken geselecteerde kalibratie";

/* */
"Delete CGM" = "Verwijder CGM";

/* */
"Are you sure you want to remove this cgm from loop?" = "Weet je zeker dat je deze CGM uit de lijst wilt verwijderen?";

/* */
"There is no undo" = "Ongedaan maken is niet mogelijk";

/* */
"Advanced" = "Geavanceerd";

/* */
"Alarms" = "Alarmen";

/* */
"Glucose Settings" = "Glucose instellingen";

/* */
"Notifications" = "Meldingen";

/* */
"Export logs" = "Logboek exporteren";

/* */
"Export not available" = "Exporteren niet beschikbaar";

/* */
"Log export requires ios 15" = "Log export vereist ios 15";

/* */
"Got it!" = "Begrepen!";

/* */
"Saved to %@" = "Opgeslagen in %@";

/* */
"No logs available" = "Geen logboeken beschikbaar";

/* */
"Glucose Notification visibility" = "Zichtbaarheid Glucose melding";

/* */
"Always Notify Glucose" = "Altijd Glucose Melden";

/* */
"Notify per reading" = "Melding bij elke meting";

/* */
"Value" = "Waarde";

/* */
"Adds Phone Battery" = "Telefoonbatterij Toevoegen";

/* */
"Adds Transmitter Battery" = "Zender Batterij Toevoegen";

/* */
"Also vibrate" = "Ook trillen";

/* */
"Additional notification types" = "Andere meldingsinstellingen";

/* */
"Misc" = "Overige";

/* */
"Unit override" = "Eenheid aanpassen";

/* */
"Low" = "Laag";

/* */
"High" = "Hoog";

/* */
"glucose" = "glucose";

/* */
"Schedule " = "Schema ";

/* */
"tapped save schedules" = "geselecteerde schema's opslaan";

/* */
"Error" = "Fout";

/* */
"Some ui element was incorrectly specified" = "Sommige ui-elementen zijn onjuist opgegeven";

/* */
"Success" = "Geslaagd";

/* */
"Schedules were saved successfully!" = "Schema's zijn succesvol opgeslagen!";

/* */
"High Glucose Alarm active" = "Hoge Glucose Alarm actief";

/* */
"Low Glucose Alarm active" = "Laag Glucose Alarm actief";

/* */
"No Glucose Alarm active" = "Geen Glucose Alarm actief";

/* */
"snoozing until %@" = "sluimeren tot %@";

/* */
"not snoozing" = "niet gesluimerd";

/* */
"nothing to see here" = "er is hier niets te zien";

/* */
"snooze from testview clicked" = "sluimeren geklikt in de testweergave";

/* */
"will snooze for %@ until %@" = "zal sluimeren voor %@ tot %@";

/* */
"Click to Snooze Alerts" = "Klik om waarschuwingen tijdelijk uit te schakelen";

/* */
"Strength" = "Intensiteit";

/* */
"Hold the top of your iPhone near the sensor to pair" = "Houd de bovenkant van je iPhone dicht bij de sensor om te koppelen";

/* */
"Sensor not found" = "Sensor niet gevonden";

/* */
"Also play alert sound" = "Ook alarmgeluid afspelen";

/* */
"Notification Settings" = "Instellingen voor meldingen";

/* */
"Found devices: %d" = "Gevonden apparaten: %d";

/* */
"Backfill options" = "Terugzet opties";

/* */
"Backfilling from trend is currently not well supported by Loop" = "Terugzetten van trend wordt momenteel niet goed ondersteund door Loop";

/* */
"Backfill from history" = "Terugzetten van geschiedenis";

/* */
"Backfill from trend" = "Terugzetten van trend";

/* */
"Debug options" = "Foutopsporing opties";

/* */
"Adds a lot of data to the Issue Report " = "Voegt veel data toe aan het probleemrapport ";

/* */
"Persist sensordata" = "Sensorgegevens bewaren";

/* */
"Battery" = "Batterij";

/* */
"Also add source info" = "Voeg ook bron info toe";

/* */
"Carbs Required Threshold" = "Koolhydraten vereist drempelwaarde";

/* */
"Carbs required: %d g" = "Koolhydraten vereist: %d g";

/* */
"To prevent LOW required %d g of carbs" = "Om LAAG te voorkomen zijn %d g koolhydraten nodig";

/* */
"FreeAPS X not active" = "FreeAPS X niet actief";

/* */
"Last loop was more then %d min ago" = "Laatste loop was meer dan %d min geleden";

/* Glucose badge */
"Show glucose on the app badge" = "Toon glucose op de app icoon";

/* */
"Backfill glucose" = "Terugzetten glucose";

/* About this source */
"About this source" = "Over deze bron";

/* */
"Bolus failed" = "Bolus mislukt";

/* */
"Bolus failed or inaccurate. Check pump history before repeating." = "Bolus mislukt of onjuist. Controleer de pompgeschiedenis voordat je herhaalt.";

/* */
"Carbs" = "Koolhydraten";

/* */
"Temp Basal" = "Tijdelijk basaal";

/* */
"Temp Target" = "Tijdelijk streefdoel";

/* */
"Resume" = "Hervat";

/* */
"Suspend" = "Onderbreek";

/* */
"Animated Background" = "Bewegende achtergrond";

/* Sensor day(s) */
" day(s)" = " dag(en)";

/* Option to show HR in Watch app*/
"Display HR on Watch" = "Display HR on Watch";


/* Headers for settings ----------------------- */
"OpenAPS main settings" = "OpenAPS hoofdinstellingen";

"OpenAPS SMB settings" = "OpenAPS SMB instellingen";

"OpenAPS targets settings" = "OpenAPS doel instellingen";

"OpenAPS other settings" = "OpenAPS overige instellingen";

/* Glucose Simulator CGM */
"Glucose Simulator" = "Glucose Simulator";

/* Restored state message */
"Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@" = "Herstelde Bluetooth-status (APS opnieuw opgestart?). %d randapparatuur gevonden en verbonden met %@ met de identificatie %@";

/* Shared app group */
"Shared app group for direct connection with Libre 1 transmitters or European Libre 2 sensors" = "Gedeelde app groep voor directe verbinding met Libre 1 sensoren of Europese Libre 2 sensoren";

/* Native G6 app */
"Native G6 app" = "Oorspronkelijke G6 app";

/* Native G5 app */
"Native G5 app" = "Oorspronkelijke G5 app";

/* Minilink transmitter */
"Minilink transmitter" = "Minilink zender";

/* Simple simulator */
"Simple simulator" = "Eenvoudige simulator";

/* Direct connection with Libre 1 transmitters or Libre 2 */
"Direct connection with Libre 1 transmitters or European Libre 2 sensors" = "Directe connectie met Libre 1 sensoren of Europese Libre 2 sensoren";

/* Online or internal server */
"Online or internal server" = "Online of interne server";

/* HealthKit intergration --------------------*/
/* */
"Apple Health" = "Apple Gezondheid";

/* */
"Connect to Apple Health" = "Verbinden met Apple Gezondheid";

/* Show when have not permissions for writing to Health */
"For write data to Apple Health you must give permissions in Settings > Health > Data Access" = "Als u gegevens wilt opslaan met Apple Gezondheid, moet u de juiste machtigingen verlenen in Instellingen > Gezondheid > Gegevenstoegang en apparaten";

/* */
"After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Na het maken van glucoserecords in de Gezondheid-app, opent u FreeAPS X om ervoor te zorgen dat de gewijzigde gegevens veilig worden overgedragen";

/* New ALerts ------------------------- */
/* Info title */
"Info" = "Info";

/* Warning title */
"Warning" = "Waarschuwing";

/* Error title */
"Error" = "Fout";

/* Manual temp basal mode */
"Manual" = "Manual";

/* Status highlight when manual temp basal is running. */
"Manual Basal" = "Manual Basal";

/* Current Manual Temp basal */
" -  Manual Basal ⚠️" = " -  Manual Basal ⚠️";

/* Total AT / Scheduled basal insulin */
" U/day" = " U/day";

/* Total AT / Scheduled basal insulin */
"Total" = "Total";

/* ---------------------------------------
  DASH strings
*/
"Attach Pod" = "Attach Pod";

"Deactivate Pod" = "Deactiveer pod";

/* */
"Deactivating..." = "Deactivating...";

"Pair Pod" = "Pair Pod";

/* Text for previous pod information row */
"Previous Pod Information" = "Previous Pod Information";

/* Text for confidence reminders navigation link */
"Confidence Reminders" = "Confidence Reminders";

"Confidence reminders are beeps from the pod which can be used to acknowledge selected commands." = "Confidence reminders are beeps from the pod which can be used to acknowledge selected commands.";

/* button title for saving low reservoir reminder while saving */
"Saving..." = "Opslaan...";

/* button title for saving low reservoir reminder */
"Save" = "Opslaan";

/* Alert title for error when updating confidence reminder preference */
"Failed to update confidence reminder preference." = "Failed to update confidence reminder preference.";

/* */
"No Error" = "No Error";

/* description label for active time pod details row */
"Active Time" = "Activatie tijd";

/* Title string for BeepPreference.silent */
"Disabled" = "Disabled";

/* Title string for BeepPreference.manualCommands */
"Enabled" = "Ingeschakeld";

/* Title string for BeepPreference.extended */
"Extended" = "Extended";

/* Description for BeepPreference.silent */
"No confidence reminders are used." = "No confidence reminders are used.";

/* Description for BeepPreference.manualCommands */
"Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When Loop automatically adjusts delivery, no confidence reminders are used." = "Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When Loop automatically adjusts delivery, no confidence reminders are used.";

/* Description for BeepPreference.extended */
"Confidence reminders will sound when Loop automatically adjusts delivery as well as for commands you initiate." = "Confidence reminders will sound when Loop automatically adjusts delivery as well as for commands you initiate.";

/* Label text for expiration reminder default row */
"Expiration Reminder Default" = "Expiration Reminder Default";

/* */
"Expiration Reminder" = "Herinnering over de vervaltijd";

/* */
"Low Reservoir" = "Low Reservoir";

/* Value text for no expiration reminder */
"No Reminder" = "No Reminder";

/* */
"Scheduled Reminder" = "Scheduled Reminder";

/* */
"Low Reservoir Reminder" = "Low Reservoir Reminder";

/* The action string on pod status page when pod data is stale */
"Make sure your phone and pod are close to each other. If communication issues persist, move to a new area." = "Make sure your phone and pod are close to each other. If communication issues persist, move to a new area.";
/* Format string for the action string on pod status page when pod expired. (1: service time remaining) */
"Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains." = "Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains.";

/* Label text for temporary basal rate summary */
"Rate" = "Waarde";

/* Summary string for temporary basal rate configuration page */
"%1$@ for %2$@" = "%1$@ for %2$@";

/* Description text on manual temp basal action sheet */
"Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled." = "Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled.";
/* Button text for setting manual temporary basal rate*/
"Set Temporary Basal" = "Set Temporary Basal";

/* Navigation Title for ManualTempBasalEntryView */
"Temporary Basal" = "Temporary Basal";

/* Alert title for a failure to set temporary basal */
"Temporary Basal Failed" = "Temporary Basal Failed";

/* Alert format string for a failure to set temporary basal with recovery suggestion. (1: error description) (2: recovery text) */
"Unable to set a temporary basal rate: %1$@\n\n%2$@" = "Unable to set a temporary basal rate: %1$@\n\n%2$@";

/* Alert format string for a failure to set temporary basal. (1: error description) */
"Unable to set a temporary basal rate: %1$@" = "Unable to set a temporary basal rate: %1$@";

/* Alert title for missing temp basal configuration */
"Missing Config" = "Missing Config";

/* Alert format string for missing temp basal configuration. */
"This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate." = "This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate.";

/* description label for active time pod details row */
"Active Time" = "Activatie tijd";

/* description label for total delivery pod details row */
"Total Delivery" = "Total Delivery";

/* */
"Add Omnipod Dash" = "Add Omnipod Dash";

/* */
"Insert Cannula" = "Plaats canule";

/* */
"Check Cannula" = "Check Cannula";

/* */
"Setup Complete" = "Setup Complete";

/* */
"Insulin Suspended" = "Insulin Suspended";

/* Text for suspend resume button when insulin delivery is suspending */
"Suspending insulin delivery..." = "Suspending insulin delivery...";

/* Text for suspend resume button when insulin delivery is suspended */
"Resume Insulin Delivery" = "Resume Insulin Delivery";

/* Text for suspend resume button when insulin delivery is resuming */
"Resuming insulin delivery..." = "Resuming insulin delivery...";

/* Alert title for suspend error */
"Failed to Suspend Insulin Delivery" = "Failed to Suspend Insulin Delivery";

/* --------------------------------------

  Infotexts from openaps.docs and androidaps.docs
  FreeAPS X
*/
/* Headline Rewind Resets Autosens */

"Rewind Resets Autosens" = "Rewind Resets Autosens";

/* ”Rewind Resets Autosens” */
"This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature." = "Deze functie, die standaard is ingeschakeld, zet Autosense de ratio terug op neutraal wanneer je pomp terugdraait, ervan uitgaande dat dit een katheter- en reservoirwissel betekent. Autosens start opnieuw op vanaf het moment van terugkeer en het kan tot 6 uur duren om de gevoeligheid opnieuw te beoordelen. Als u uw pomp normaal gesproken onafhankelijk van de resevoir- en katheterwissel terugdraait, kunt u overwegen om deze functie uit te schakelen.";

/* Headline "High Temptarget Raises Sensitivity" */
"High Temptarget Raises Sensitivity" = "High Temptarget Raises Sensitivity";

/* ”High Temptarget Raises Sensitivity" */
"Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160)." = "Is standaard uitgeschakeld. Wanneer ingeschakeld, verhoogt dit de gevoeligheid (lagere gevoeligheidsratio) voor tijdelijk doel tot >= 111 exercise_mode. Hoe hoger je doel boven de 110 ligt, hoe gevoeliger (lagere) ratio's, bijvoorbeeld tijdelijk streefdoel van 120 resulteert in de sensitiviteitsratio van 0,75, terwijl 140 resulteert in 0,6 (met standaard half-basaal doel van 160).";

/* Headline ”Low Temptarget Lowers Sensitivity" */
"Low Temptarget Lowers Sensitivity" = "Low Temptarget Lowers Sensitivity";

/* ”Low Temptarget Lowers Sensitivity" */
"Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160)." = "Is standaard uitgeschakeld. Indien ingeschakeld, kan de gevoeligheid (hogere gevoeligheidsratio) voor tijdelijke doelen worden verlaagd < = 99. Hoe lager je tijdelijke doel onder de 100 ligt, hoe hoger de gevoeligheid zal zijn. Zo levert een tijdelijk koersdoel van 95 een gevoeligheidsratio van 1,09 op, terwijl 85 een waarde van 1,33 geeft.";

/* Headline ”Sensitivity Raises Target" */
"Sensitivity Raises Target" = "Sensitivity Raises Target";

/* ”Sensitivity Raises Target" */
"When true, raises BG target when autosens detects sensitivity" = "Wanneer waar, verhoogt het BG streefdoel als autosens gevoeligheid detecteert";

/* Headline ”Resistance Lowers Target" */
"Resistance Lowers Target" = "Resistance Lowers Target";

/* ”Resistance Lowers Target" */
"Defaults to false. When true, will lower BG target when autosens detects resistance" = "Standaard op onwaar. Wanneer waar, zal het BG doel verlagen als autosens minder gevoeligheid detecteert";

/* Headline ”Advanced Target Adjustments" */
"Advanced Target Adjustments" = "Advanced Target Adjustments";

/* ”Advanced Target Adjustments" */
"This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone." = "Deze functie was in het verleden altijd geactiveerd, maar is nu standaard ingesteld op \"Uit\". Dit is niet langer nodig met oref 0.6.0. Deze functie verlaagt automatisch de bloedglucosedoelstelling van oref0 als de huidige BG of de verwachte BG hoog zijn. Dit helpt hoge BG te voorkomen en te beperken, maar schakelt automatisch over op lage gevoeligheid om ervoor te zorgen dat de BG zich soepel naar uw eigenlijke doel beweegt. Als u dit gedrag te agressief vindt, kunt u deze functie uitschakelen. Als u dat doet, laat het ons dan weten, zodat we beter kunnen begrijpen welke instellingen voor iedereen het beste werken.";

/* Headline "Exercise Mode" */
"Exercise Mode" = "Exercise Mode";

/* "Exercise Mode" */
"Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity" = "Standaard uit. Indien aan, > 105 mg/dL hoge tijdelijke doelstelling past gevoeligheid voor Oefening_Modus aan. Synoniem voor hoge tijdelijk doel verhoging gevoeligheid";


/* Headline "Wide BG Target Range" */
"Wide BG Target Range" = "Wide BG Target Range";

/* "Wide BG Target Range" */
"Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs." = "Standaard uit betekent dat standaard alleen de laagste BG van de pomp wordt gebruikt als OpenAPS doel. Dit is een veiligheidsvoorziening om al te brede doelen en minder optimale resultaten te voorkomen. Daarom wordt het hoogste eind van het streefbereik alleen gebruikt om teveel compenseren van de bolus assistent te voorkomen. Gebruik wide_bg_target_range: true om neutrale temps af te dwingen over een breder bereik van de uiteindelijke BG.";


/* Headline "Skip Neutral Temps" */
"Skip Neutral Temps" = "Skip Neutral Temps";

/* "Skip Neutral Temps" */
"Defaults to false, so that FreeAPS X will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means FreeAPS X will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications from the 'rig', that may wake you up during the night." = "Standaard ingesteld op uit, zodat FreeAPS X tijdelijke basaal waardes zal instellen wanneer dat maar kan. het zal dus makkelijker zijn om te zien of het systeem werkt, zelfs als je offline bent. Dit betekent dat OpenAPS een \"neutraal\" basaal (hetzelfde als jouw standaard basaal) zal instellen als er geen aanpassingen nodig zijn. Dit is een oude instelling van OpenAPS om de optie te hebben om geluiden en meldingen te beperken waarvan je 's nachts misschien wakker kan worden. ";

/* Headline "Unsuspend If No Temp” */
"Unsuspend If No Temp" = "Unsuspend If No Temp";

/* "Unsuspend If No Temp” */
"Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended." = "Veel mensen vergeten af en toe hun pomp te hervatten nadat ze opnieuw zijn aangesloten. Herken je jezelf hierin en ben je bereid voordat je je afkoppelt een tijdelijk basaal van 0 in te stellen kan deze instelling helpen. Indien ingeschakeld zal de pomp automatisch hervatten, als je dit zelf vergeet te doen voordat het tijdelijk 0 basaal verloopt. Zolang het tijdelijk 0 basaal nog actief is, laat FreeAPS X de pomp opgeschort.";

/* Headline "Enable UAM" */
"Enable UAM" = "Enable UAM";

/* "Enable UAM" */
"With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell FreeAPS X about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier." = "Als deze optie is ingeschakeld, herkent het SMB-algoritme onaangekondigde maaltijden. Dit is nuttig, als je vergeet om koolhydraten in te voeren, je koolhydraten verkeerd inschat, de hoeveelheid ingevoerde koolhydraten verkeerd is of als een maaltijd met veel vet en eiwit een langere duur heeft dan verwacht. Zonder koolhydraten in te voeren, kan UAM snelle glucoseverhogingen veroorzaakt door koolhydraten, adrenaline, etc. herkennen en dit proberen op te lossen met SMB's. Dit werkt ook andersom: als er een snelle glucose daling is, kan het eerder stoppen met SMBs.";

/* Headline "Enable SMB With COB" */
"Enable SMB With COB" = "Enable SMB With COB";

/* Enable SMB With COB" */
"This enables supermicrobolus (SMB) while carbs on board (COB) are positive." = "Dit activeert supermicrobolus (SMB) wanneer er koolhydraten actief zijn (COB).";

/* Headline "Enable SMB With Temptarget” */
"Enable SMB With Temptarget" = "Enable SMB With Temptarget";

/* "Enable SMB With Temptarget” */
"This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB." = "Dit maakt kleine microbolussen (SMB, supermicrobolus) mogelijk wanneer \"eating soon/pre-maaltijd\" of een lage tijdelijke streefwaarde is ingesteld. Als dit is ingesteld zal elke tijdelijke streefwaarde onder 100mg/dL (5.5 mmol/l) bijvoorbeeld 5.4 (of 4.5, de typische pre-maaltijd streefwaarde) SMB inschakelen.";

/* Headline "Enable SMB Always" */
"Enable SMB Always" = "Enable SMB Always";

/* "Enable SMB Always" */
"Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget)." = "Standaard uit. Als het aangezet wordt zullen altijd supermicrobolussen (SMBs) gebruikt worden. Tenzij deze uitgezet zijn door een hoge streefwaarde.";

/* Headline "Enable SMB After Carbs" */
"Enable SMB After Carbs" = "Enable SMB After Carbs";

/* "Enable SMB After Carbs" */
"Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB)." = "Standaard uit. Als het aangezet wordt zullen supermicrobolussen (SMBs) gebruikt worden voor 6 uur na ingevoerde koolhydraten, zelfs als er nog 0 koolhydraten aan boord zijn (COB).";

/* Enable "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* Headline "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* "Allow SMB With High Temptarget" */
"Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets." = "Standaard uit. Als het aangezet wordt zullen altijd supermicrobolussen (SMBs) altijd gebruikt worden (mits elders aangezet).";

/* Headline "Use Custom Peak Time” */
"Use Custom Peak Time" = "Use Custom Peak Time";

/* "Use Custom Peak Time” */
"Defaults to false. Setting to true allows changing insulinPeakTime" = "Is standaard ingesteld op uit. Indien ingeschakeld, kunt u de insuline piektijd veranderen";

/* Headline "Suspend Zeros IOB” */
"Suspend Zeros IOB" = "Suspend Zeros IOB";

/* "Suspend Zeros IOB” */
"Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added." = "Standaard uit. Alle reeds ingevoerde tijdelijke basaalstanden die ingevoerd zijn wanneer de pomp is opgeschort, worden verwijderd. Een 0 tijdelijk basaal wordt toegevoegd om de in het profiel opgegeven basaal te overschijven gedurende de tijd dat de pomp was opgeschort.";

/* Headline "Max IOB" */
"Max IOB" = "Max IOB";

/* "Max IOB" */
"Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop)." = "De Max IOB is de maximale hoeveelheid insuline aan boord van alle bronnen - zowel basaal (of SMB correcties) en bolus insuline die door FreeAPS X gegeven mag worden om alles hoger dan de streefwaarde te behandelen. Anders dan de andere twee veiligheid instelingen (max_daily_safety_multiplier and current_basal_safety_multiplier) wordt bij deze instelling een vaste aantal eenheden insuline opgegeven. Voorlopig worden handmatige bolussen NIET beperkt door deze instelling. \n\n Om je basaal waarden te testen gedurende de nacht kun je deze instelling op 0 zetten tijdens een gesloten Loop. Dit zorgt er voor dat stop voor laag geactiveerd worden wanneer je je instelling aan het testen bent. \n\n(Tip van https://www.loopandlearn.org/freeaps-x/#open-loop).";

/* Headline "Max Daily Safety Multiplier" */
"Max Daily Safety Multiplier" = "Max Daily Safety Multiplier";

/* "Max Daily Safety Multiplier" */
"This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "Dit is een belangrijke OpenAPS veiligheidslimiet. De standaardinstelling (die waarschijnlijk geen aanpassingen nodig zal hebben) is 3. Dit betekent dat OpenAPS nooit zal worden toegestaan om een tijdelijke basaalstand in te stellen die groter is dan 3 x de hoogste basaalstand per uur, geprogrammeerd in een gebruikerspomp, of indien ingeschakeld, bepaald door autotune.";

/* Headline "Current Basal Safety Multiplier" */
"Current Basal Safety Multiplier" = "Current Basal Safety Multiplier";

/* "Current Basal Safety Multiplier" */
"This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "Dit is ook een belangrijke OpenAPS veiligheidslimiet. De standaard instelling (die waarschijnlijk niet aangepast hoeft te worden) is 4. Dit betekend dat OpenAPS niet een hoger tijdelijk basaal waarde mag instellen dan 4 keer het huidige basaal van dit uur ingesteld in de pomp, of als dit is ingesteld bepaald door autotune.";

/* Headline "Autosens Max" */
"Autosens Max" = "Autosens Max";

/* "Autosens Max" */
"This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target." = "Dit is een vermenigvuldigingsfactor voor Autosens (en Autotune) om een maximum te zetten van 20% op hoe hoog de Autosens ratio kan zijn. Dit bepaald hoe hoog Autosens het basaal kan aanpassen, hoe laag het de ISF kan instellen en hoe laag het de streefwaarde kan maken.";


/* Headline "Autosens Min" */
"Autosens Min" = "Autosens Min";

/* "Autosens Min" */
"The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets." = "De andere kant van de Autosens veiligheidslimiet, dit set een limiet op hoe laag Autosens de basaal kan zetten, hoe hoog het de ISF kan zetten en hoe hoog de streefwaarde ingesteld kan worden.";

/* Headline "Half Basal Exercise Target" */
"Half Basal Exercise Target" = "Half Basal Exercise Target";

/* "Half Basal Exercise Target" */
"Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes." = "Stel in op nummer, b.v. 160, wat betekent dat wanneer een tijdelijk streefdoel 160 mg/dL (9 mmol/l) en bewegingen_mode=true is, 50% basaal op dit niveau (120 (6,7) = 75%; 140 (7,8) = 60%). Dit kan worden aangepast, om u meer controle te geven over uw oefeningsmodi.";

/* Headline "Max COB" */
"Max COB" = "Max COB";

/* "Max COB" */
"This defaults maxCOB to 120 because that’s the most a typical body can absorb over 4 hours. (If someone enters more carbs or stacks more; OpenAPS will just truncate dosing based on 120. Essentially, this just limits AMA as a safety cap against weird COB calculations due to fluky data.)" = "De standaard maximum COB van 120 is omdat een normaal lichaam niet meer dan dit in 4 uur kan absorberen. (Als er meer koolhydraten gestapeld worden; zal OpenAPS de dosering beperken tot de basis van 120 koolhydraten aan boord. In wezen beperkt dit alleen AMA als een veiligheidslimiet tegen afwijkende COB-berekeningen vanwege verkeerde gegevens)";

/* Headline "Bolus Snooze DIA Divisor" */
"Bolus Snooze DIA Divisor" = "Bolus Snooze DIA Divisor";

/* "Bolus Snooze DIA Divisor" */
"Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2)." = "Bolus snooze is geactiveerd nadat je een maaltijdbolus hebt gedaan, zodat de Loop geen lage streefwaardes zal instellen wanneer je net hebt gegeten. Het voorbeeld hier en de standaard waarde is 2; dus een DIA van 3 uur betekent dat bolus snooze geleidelijk aan zal verdwijnen binnen 1,5 uur (3DIA/2).";

/* Headline "Min 5m Carbimpact" */
"Min 5m Carbimpact" = "Min 5m Carbimpact";

/* "Min 5m Carbimpact" */
"This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g." = "Dit is een instelling voor de standaard koolhydraten absorptie per 5 minuten. De standaard waarde is een verwachte 8 mg/dL/5min. Dit beïnvloedt hoe snel COB afneemt in situaties waarin koolhydraat absorptie niet zichtbaar is in BG afwijkingen. De standaard van 8 mg/dL/5 min komt overeen met een minimale koolhydraten absorptie van 24g/hr op een CSF (koolhydraat gevoeligheid factor) van 4 mg/dL/g.";

/* Headline "Autotune ISF Adjustment Fraction" */
"Autotune ISF Adjustment Fraction" = "Autotune ISF Adjustment Fraction";

/* "Autotune ISF Adjustment Fraction" */
"The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF." = "The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF.";

/* Headline "Remaining Carbs Fraction" */
"Remaining Carbs Fraction" = "Remaining Carbs Fraction";

/* "Remaining Carbs Fraction" */
"This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "Dit is de fractie van koolhydraten waarvan we aannemen dat ze gedurende 4 uur zullen absorberen, als we nog geen koolhydraten absorptie zien.";

/* Headline "Remaining Carbs Cap" */
"Remaining Carbs Cap" = "Remaining Carbs Cap";

/* "Remaining Carbs Cap" */
"This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "Dit is het maximale aantal koolhydraten waarvan we aannemen dat ze over een periode van 4 uur geabsorbeerd worden als we nog geen absorptie zien.";

/* Headline ”Max SMB Basal Minutes" */
"Max SMB Basal Minutes" = "Max SMB Basal Minutes";

/* ”Max SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Staat standaard op 30. Dit is het maximum aantal minuten van basaal dat kan worden toegediend als een enkele supermicrobolus (SMB) zonder dat dit compenseert wordt door COB. Dit zorgt er voor dat SMB agressiever kan worden ingesteld, als je daarvoor kiest. Het is aanbevolen om te beginnen met een waarde van 30 minuten, de standaard waarde en als je er voor kiest om de waarde te verhogen dat je dit met niet grotere stappen doet dan stappen van 15 minuten. Het is niet aanbevolen om het hoger dan 90 minuten in te stellen, dit beperkt de mogelijkheid van het algoritme om veilig een tijdelijk 0 basaal in te stellen. Het wordt ook aanbevolen om push berichten aan te zetten voor wanneer de glucose waardes hoog of laag dreigen te raken.";

/* Headline "Max UAM SMB Basal Minutes" */
"Max UAM SMB Basal Minutes" = "Max UAM SMB Basal Minutes";

/* "Max UAM SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Staat standaard op 30. Dit is het maximum aantal minuten van basaal dat kan worden toegediend door UAM as een enkele supermicrobolus wanneer de IOB groter is dan dan COB. Dit zorgt er voor dat UAM agressiever kan worden ingesteld, als je daarvoor kiest. Het is aanbevolen om te beginnen met een waarde van 30 minuten, de standaard waarde en als je er voor kiest om de waarde te verhogen dat je dit met niet grotere stappen doet dan stappen van 15 minuten, terwijl je het effect goed in de gaten houd. Het is niet aanbevolen om het hoger dan 60 minuten in te stellen, dit beperkt de mogelijkheid van het algoritme om veilig een tijdelijk 0 basaal in te stellen. Het wordt ook aanbevolen om push berichten aan te zetten voor wanneer de glucose waardes hoog of laag dreigen te raken.";

/* Headline "SMB Interval" */
"SMB Interval" = "SMB Interval";

/* "SMB Interval" */
"Minimum duration in minutes between two enacted SMBs" = "Minimale duur in minuten tussen twee uitgevoerde SMBs";

/* Headline "Bolus Increment" */
"Bolus Increment" = "Bolus Increment";

/* "Bolus Increment" */
"Smallest SMB / SMB increment in oref0. Minimum amount for Medtronic pumps is 0.1 U, whereas for Omnipod it’s 0.05 U. The default value is 0.1." = "Kleinste SMB / SMB Verhoging in de oranje. Minimale hoeveelheid voor Medtronic pompen is 0. U, en voor Omnipod is het 0,05 U. De standaardwaarde is 0,1.";

/* Headline "Insulin Peak Time" */
"Insulin Peak Time" = "Insulin Peak Time";

/* "Insulin Peak Time" */
"Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops." = "Tijd van maximale bloedglucose verlagend effect van insuline in hele minuten (insuline piek tijd). Let op: Oref gaat er van uit dat ultra-snelle (Lyumjev) & snelle werking (Fiasp) curves minimaal (35 & 50 min) en maximaal (100 en 120 min) hebben als insulinPeakTimes. Het gebruik van een aangepaste insulinPeakTime buiten deze grenzen leidt tot problemen met FreeAPS-X, langere loopberekeningen en mogelijke een rode Loop.";

/* Headline "Carbs Req Threshold" */
"Carbs Req Threshold" = "Carbs Req Threshold";

/* "Carbs Req Threshold" */
"Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold." = "Aantal gram koolhydraten benodigd om een push bericht te versturen. Standaard ingesteld op 1 (voor 1 gram aan koolhydraten). Kan worden verhoogd als alleen voor push berichten wil krijgen boven de ingestelde drempelwaarde.";

/* Headline "Noisy CGM Target Multiplier" */
"Noisy CGM Target Multiplier" = "Noisy CGM Target Multiplier";

/* "Noisy CGM Target Multiplier" */
"Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data" = "De standaardwaarde is 1.3. De streefwaarde wordt met deze factor verhoogd als er CGM-waarden met ruis aanwezig zijn";

/* Headline "SMB DeliveryRatio" */
"SMB DeliveryRatio" = "SMB DeliveryRatio";

/* SMB DeliveryRatio */
"Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution." = "Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution.";

// Dynamic ISF + CR Settings:
/* Headline "Adjust Dynamic ISF constant" */

"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Enable Dynamic ISF, Headline */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Headline "Enable Dynamic ISF" */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Enable Dynamic ISF */
"Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes" = "Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes";

/* Headline "Enable Dynamic CR" */
"Enable Dynamic CR" = "Enable Dynamic CR";

/* Enable Dynamic CR */
"Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)" = "Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)";

/* Headline "Adjust Dynamic ISF constant" */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ratios by a constant. Default is 1. Higher than 1 => lower ISF" = "Adjust Dynamic ratios by a constant. Default is 1. Higher than 1 => lower ISF";


/* Headline "Use Sigmoid Function" */
"Use Sigmoid Function" = "Use Sigmoid Function";

/* Use Sigmoid Function */
"Use a sigmoid function for ISF (and for CR, when enabled), instead of the Logarithmic formula. Is only used when the Dynamic ISF setting is enabled in settings\n\nThe autosens.min/max settings determines the power with which dynamic ratio is adjusted, the height of the graph (Y-interval, Y: Dynamic ratio) and where the sigmoid curve flattens out, thus also limiting how high and how low the the ISF can be adjusted.\n\nThe Adjustment settings adjusts the slope of the curve. A lower value ==> less steep == less aggressive.\n\nYour scheduled/autotuned ISF setting and your min BG target determines when Dynamic ratio = 1 (ISF unchanged), meaning when current BG = minimum target BG => new ISF will always be set to your current scheduled/autotuned ISF, unlike the default logarithmic formula.\n\nDynamic CR is used when the setting 'Enable Dynamic CR' is enabled in settings." = "Use a sigmoid function for ISF (and for CR, when enabled), instead of the Logarithmic formula. Is only used when the Dynamic ISF setting is enabled in settings\n\nThe autosens.min/max settings determines the power with which dynamic ratio is adjusted, the height of the graph (Y-interval, Y: Dynamic ratio) and where the sigmoid curve flattens out, thus also limiting how high and how low the the ISF can be adjusted.\n\nThe Adjustment settings adjusts the slope of the curve. A lower value ==> less steep == less aggressive.\n\nYour scheduled/autotuned ISF setting and your min BG target determines when Dynamic ratio = 1 (ISF unchanged), meaning when current BG = minimum target BG => new ISF will always be set to your current scheduled/autotuned ISF, unlike the default logarithmic formula.\n\nDynamic CR is used when the setting 'Enable Dynamic CR' is enabled in settings.";


/* Headline "Threshold Setting" */
"Threshold Setting (mg/dl)" = "Threshold Setting (mg/dl)";

/* Threshold Setting */
"The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl." = "The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl.";

/* Headline "Weighted Average of TDD. Weight of past 24 hours:" */
"Weighted Average of TDD. Weight of past 24 hours:" = "Weighted Average of TDD. Weight of past 24 hours:";

/* Weight of past 24 hours of insulin */
"Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment)." = "Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment).";

/* Headline "Adjust basal" */
"Adjust basal" = "Adjust basal";

/* Enable adjustment of basal profile */
"Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD" = "Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD";

/* Headline "Max Delta-BG Threshold SMB" */
"Max Delta-BG Threshold SMB" = "Max Delta-BG Threshold SMB";

/* Max Delta-BG Threshold SMB */
"Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!)." = "Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!).";

/* Headline "... When Blood Glucose Is Over (mg/dl):" */
"... When Blood Glucose Is Over (mg/dl):" = "... When Blood Glucose Is Over (mg/dl):";

/* ... When Blood Glucose Is Over (mg/dl): */
"Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable." = "Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable.";

/* Headline "Enable SMB With High BG" */
"Enable SMB With High BG" = "Enable SMB With High BG";

/* "Enable SMB With High BG" */
"Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)" = "Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)";

/* Headline "Dynamic settings" */
"Dynamic settings" = "Dynamic settings";

/* Insulin curve */
"Insulin curve" = "Insulin curve";

/* Headline "Adjustment Factor" */
"Adjustment Factor" = "Adjustment Factor";