Trio/FreeAPS/Sources/Localizations/Main/da.lproj/Localizable.strings

/*
  Localizable.strings
  iAPS
*/
/* -------------------------------- */
/* Bolus screen when adding insulin */
"Add insulin without actually bolusing" = "Tilføj insulin uden faktisk bolus";

/* Add insulin from source outside of pump */
"Add %@ without bolusing" = "Tilføj %@ uden bolus";

"Bolus" = "Bolus";

"Close" = "Luk";

/* Continue after added carbs without bolus */
"Continue without bolus" = "Fortsæt uden bolus";

/* Alert when adding large amount without bolusing */
"\nAmount is more than your Max Bolus setting! \nAre you sure you want to add " = "\nDette er mere insulin end din \"max dosis\" indstilling!\nEr du sikker på at du vil tilføje ";

/* Header */
"Enact Bolus" = "Udfør Bolus";

/* Button */
"Enact bolus" = "Udfør bolus";

/*  */
"Insulin recommended" = "Anbefalet insulin";

/*  */
"Insulin required" = "Insulinbehov";

/* Bolus screen */
"Recommendation" = "Anbefaling";

/* Button */
"Clear" = "Ryd";

/* Button */
"Done" = "OK";

/*  */
"Wait please" = "Vent venligst";

/*  */
"Agree and continue" = "Godkend og fortsæt";

/* Headline in enacted pop up (at: at what time) */
"Enacted at" = "Udført";

/* Headline in suggested pop up (at: at what time) */
"Suggested at" = "Anbefalet";

/* Headline in enacted pop up (at: at what time) */
"Error at" = "Fejl ved";

/* Bolus View Meal Summary Header */
"Meal Summary" = "Måltidsoversigt";

/* Bolus View Meal Edit Meal Button */
"Edit Meal" = "Rediger Måltid";

/* Bolus View Meal Add Meal Button */
"Add Meal" = "Tilføj Måltid";

/* Bolus View Bolus Summary Header */
"Bolus Summary" = "Bolusoversigt";

/* For the  Bolus View pop-up */
"Calculations" = "Beregninger";

/* For the  Bolus View pop-up */
"Fatty Meal" = "Fedt Måltid";

/* For the  Bolus View pop-up */
"Full Bolus" = "Fuld Bolus";

/* For the  Bolus View pop-up */
"Fraction" = "Fraktion";

/* For the  Bolus View pop-up */
"Fatty Meal Factor" = "Fedt Måltidsfaktor";

/* For the  Bolus View pop-up */
"Result" = "Resultat";

/* For the  Bolus View pop-up */
"Your entered amount was limited by your max Bolus setting of %d%@" = "Din indtastade mængde blev begrænset af din maksimale Bolusindstilling på %d%@";

/* Bolus View Continue Button */
"Continue" = "Fortsæt";

/* Home title */
"Home" = "Hjem";

/* Looping in progress */
"looping" = "looping";

/* min ago since last loop */
"min ago" = "min";

/* Status Title */
"No suggestion" = "Ingen forslag";

/* Replace pod text in Header */
"Replace pod" = "Udskift pod";

/* Add carbs screen */
"Add Carbs" = "Tilføj Kulhydrater";

/* Add carbs header and button in Watch app. You can skip the last " " space. It's just for differentiation */
"Add Carbs " = "Tilføj Kulhydrater ";

/*  */
"Amount Carbs" = "Antal Kulhydrater";

/* Grams unit */
"grams" = "gram";

/*  */
"Carbs required" = "Krævede kulhydrater";

/* Saved Food Presets */
"Saved Food" = "Gemte Måltider";

/* */
"Are you sure?" = "Er du sikker?";

/* Bottom target temp */
"Bottom target" = "Laveste mål";

/* Cancel preset name */
"Cancel" = "Annuller";

/*  */
"Cancel Temp Target" = "Annuller Midlertidigt Mål";

/* Custom temp target */
"Custom" = "Brugerdefineret";

/*  */
"Date" = "Dato";

/*  */
"Delete" = "Slet";

/* Delete preset temp target */
"Delete preset \"%@\"" = "Slet forudindstilling \\\"%@\\\"";

/* Duration of target temp or temp basal */
"Duration" = "Varighed";

/*  */
"Enact Temp Target" = "Udfør Midlertidigt Mål";

/* */
"Target" = "Mål";

/* */
"Basal Insulin and Sensitivity ratio" = "Basal insulin og følsomhedsforhold";

/* */
"A lower 'Half Basal Target' setting will reduce the basal and raise the ISF earlier, at a lower target glucose." = "En lavere indstilling for 'Halve basaldosis ved motion' vil lede til en sænkning af basalinsulin og en øget insulinfølsomhed tidligere, ved et lavere mål.";

/* */
" Your setting: " = " Nuværende indstilling: ";

/* */
"mg/dl. Autosens.max limits the max endpoint" = "mg/dl. Autosens.max begrænser maxværdien";

/*  */
"Enter preset name" = "Angiv forudindstillingsnavn";

/* Preset name */
"Name" = "Navn";

/* minutes of target temp */
"minutes" = "minutter";

/*  */
"Presets" = "Forudindstillinger";

/* Save preset name */
"Save" = "Gem";

/*  */
"Save as Preset" = "Gem som forudindstilling";

/* Delete Meal Preset */
"Delete Preset" = "Slet forudindstilling";

/* Confirm Deletion */
"Delete preset '%@'?" = "Slet forudindstilling '%@'?";

/* Button */
"No" = "Nej";

/* Button */
"Yes" = "Ja";

/* + Button */
"[ +1 ]" = "[ +1 ]";

/* - Button */
"[ -1 ]" = "[ -1 ]";

/* Upper temp target limit */
"Top target" = "Øvre mål";

/*  Temp target set for ... minutes */
"for" = "for";

/*  Temp target set for ... minutes */
"min" = "min";

/*  */
"Autotune" = "Autotune";

/*  */
"Basal profile" = "Basal profil";

/*  */
"Carb ratio" = "Kolhydratsratio";

/*  */
"Delete autotune data" = "Slet autotune data";

/*  */
"Run now" = "Kør nu";

/*  */
"Last run" = "Senest kørt";

/*  */
"Sensitivity" = "Sensitivitet";

/*  */
"Use Autotune" = "use Autotune";

/* Add profile basal */
"Add" = "Tilføj";

/*  */
"Basal Profile" = "Basal profil";

/* Rate basal profile */
"Rate" = "Værdi";

/*  */
"Save on Pump" = "Gem på Pump";

/*  */
"Saving..." = "Gemmer...";

/*  */
"Schedule" = "Skema";

/*  */
"starts at" = "starter ved";

/* Time basal profile */
"Time" = "Tid";

/* */
"Calculated Ratio" = "Udregnet Ratio";

/* Carb Ratios header */
"Carb Ratios" = "Kolhydratsratio";

/*  */
"Ratio" = "Ratio";

/*  */
"Autosens" = "Autosens";

/*  */
"Calculated Sensitivity" = "Udregent Sensitivitet";

/*  */
"Insulin Sensitivities" = "Insulin Sensitivitet";

/* */
"Sensitivity Ratio" = "Sensitivitetsratio";

/*  */
"Dismiss" = "Luk";

/*  */
"Important message" = "Vigtig besked";

/*  */
"Amount" = "Mængde";

/* */
"Cancel Temp Basal" = "Annuller midlertidig basal";

/* Enact
Enact a temp Basal or a temp target */
"Enact" = "Udfør";

/* */
"Manual Temp Basal" = "Manuel Temp Basal";

/* Allow uploads to different services */
"Allow uploads" = "Tilføj uploads";

/* API secret in NS */
"API secret" = "API hemmelighed";

/* Connect to NS */
"Connect" = "Forbind";

/* Connected to NS */
"Connected!" = "Forbundet!";

/* Connecting to NS */
"Connecting..." = "Forbinder...";

/*  */
"Invalid URL" = "Invalid URL";

/*  */
"Local glucose source" = "Local glukose kilde";

/* Header */
"Nightscout Config" = "Nightscout Konfiguration";

/*  */
"Port" = "Port";

/*  */
"URL" = "URL";

/**/
"Use local glucose server" = "Brug lokal server som glukosekilde";

/*  */
"Edit settings json" = "Rediger indstillingsjson";

/* */
"Glucose units" = "Glukose enhed";

/*  */
"Preferences" = "Preferencer";

/* Recommended Insulin Fraction in preferences */
"Recommended Insulin Fraction" = "Anbefalet Insulinbrøk";

/* Do you want to show bolus screen after added carbs? */
"Skip Bolus screen after carbs" = "Skip Bolus skærm efter kulhydrater";

/* Allow remote control from NS */
"Remote control" = "Fjernkontrol";

/* Imported Profiles Alert */
"\nNow please verify all of your new settings thoroughly:\n\n* Basal Settings\n * Carb Ratios\n * Glucose Targets\n * Insulin Sensitivities\n * DIA\n\n in iAPS Settings > Configuration.\n\nBad or invalid profile settings could have disatrous effects." = "\nKontroller nu alle dine nye indstillinger grundigt:\n\n* Basal Indstillinger\n * Kulhydratratios\n * Glukose Mål\n * Insulin Følsomhed\n * VIA\n\n i iAPS Indstillinger > Konfiguration.\n\nDårlige eller ugyldige profilindstillinger kan have katastrofale effekter.";

/* Profile Import Alert */
"This will replace some or all of your current pump settings. Are you sure you want to import profile settings from Nightscout?" = "Dette vil erstatte nogle eller alle dine aktuelle pumpeindstillinger. Er du sikker på, at du vil importere profilindstillinger fra Nightscout?";

/* Import Error */
"\nInvalid Nightcsout Basal Settings. \n\nImport aborted. Please check your Nightscout Profile Basal Settings!" = "\nUgyldig Nightcsout Basal Indstillinger. \n\nImport afbrudt. Tjek venligst dine Nightscout Profil Basal Indstillinger!";

/* Import Error */
"\nSettings were imported but the Basals couldn't be saved to pump (No pump). Check your basal settings and tap ´Save on Pump´ to sync the new basal settings" = "\nIndstillinger blev importeret, men Basalinsulin indstillinger kunne ikke gemmes til pumpe (Ingen pumpe). Tjek dine basal indstillinger og tryk på 'Gem på Pumpe' for at synkronisere de nye basal indstillinger";

/* Import Error Headline */
"Import Error" = "Importfejl";

/* */
"Yes, Import" = "Ja, importer";

/* */
"Import settings from Nightscout" = "Importer indstillinger fra Nightscout";

/* */
"Import settings?" = "Import indstillinger?";

/* */
"Import from Nightscout" = "Import fra Nightscout";

/* */
"Settings imported" = "Indstillinger importeret";

/* Import Error */
"\nMismatching glucose units in Nightscout and Pump Settings. Import settings aborted." = "\nUoverensstemmende glukose enheder i Nightscout og Pumpe Indstillinger. Import af indstillinger afbrudt.";

/* Import Error */
"Can't find the default Nightscout Profile." = "Kan ikke finde standard Nightscout profil.";

/* Add Blood Glucose Test, header */
"Blood Glucose Test" = "Blodglukose Test";

/* Add Medtronic pump */
"Add Medtronic" = "Tilføj Medtronic";

/* Add Omnipod pump */
"Add Omnipod" = "Tilføj Omnipod";

/* Add Simulator pump */
"Add Simulator" = "Tilføj Simulator";

/* Insulin model */
"Model" = "Model";

/*  */
"Pump config" = "Pumpe konfiguration";

/*  */
"Delivery limits" = "Insulingrænser";

/*  */
"Duration of Insulin Action" = "Varighed af Insulin Aktivitet";

/* hours of duration of insulin activity */
"hours" = "timer";

/* Max setting */
"Max Basal" = "Max Basal";

/* Max setting */
"Max Bolus" = "Max Bolus";

/* Max setting */
"Max Carbs" = "Maks Kulhydrater";

/* */
"Pump Settings" = "Pumpe Indstillinger";

/* Insulin unit per hour */
"U/hr" = "E/t";

/* Unit in number of units delivered (keep the space character!) */
" U" = " E";

/* /Insulin unit */
"/U" = "/E";

/* Insulin unit */
"U" = "E";

/* Unit per hour with space */
" U/hr" = " E/t";

/* Number of units per hour*/
"%@ U/hr" = "%@ E/t";

/* Number of units insulin delivered */
"%@ U" = "%@ E";

/*Carb ratio unit */
"g/U" = "g/E";

/* grams */
" g" = " g";

/* The short unit display string for grams */
"g" = "g";

/* when 0 U/hr */
"0 U/hr" = "0 E/t";

/* abbreviation for days */
"d" = "d";

/* abbreviation for hours */
"h" = "t";

/* abbreviation for minutes */
"m" = "n";

/*  */
"Closed loop" = "Lukket Loop";

/* */
"Configuration" = "Konfiguration";

/* */
"Devices" = "Enheder";

/*  */
"Pump" = "Pumpe";

/* */
"Watch" = "Ur";

/* */
"Watch Configuration" = "Ur Indstillinger";

/* */
"Apple Watch" = "Apple Watch";

/* */
"Display on Watch" = "Vis på Ur";

/* */
"Garmin Watch" = "Garmin Ur";

/* */
"Add devices" = "Tilføj enheder";

/* */
"Glucose Target" = "Glukose mål";

/* */
"Heart Rate" = "Hjerterytme";

/* */
"Steps" = "Skridt";

/* */
"ISF" = "Insulin følsomhedsfaktor";

/* */
"The app Garmin Connect must be installed to use for iAPS.\n Go to App Store to download it" = "Garmin Connect skal være installeret for at bruge iAPS.\n Gå til App Store for at downloade den";

/* */
"Garmin is not available" = "Garmin er ikke tilgængelig";

/*  */
"Services" = "Tjenester";

/*  */
"Settings" = "Indstillinger";

/* Recommendation for a Manual Bolus */
"Recommended Bolus Percentage" = "Anbefalet Bolus Procent";

/* 2 log files to share */
"Share logs" = "Del logs";

/* Upper target */
"High target" = "Højt mål";

/* Lower target */
"Low target" = "Lavt mål";

/* When bolusing */
"Bolusing" = "Administrerer Bolus";

/* */
"Pump suspended" = "Pumpe suspenderet";

/* */
"Middleware" = "Middleware";

/* Header */
"History" = "Historie";

/* Nightscout option */
"Upload" = "Upload";

/* Nightscout option */
"Allow Uploads" = "Tillad Uploads";

/* Type of CGM or glucose source */
"Type" = "Type";

/* CGM */
"CGM" = "CGM";

/* CGM Transmitter ID */
"Transmitter ID" = "Sender ID";

/* Other CGM setting */
"Other" = "Andet";

/* Whatch app alert */
"Set temp targets presets on iPhone first" = "Indstil forudindstillinger for midlertidig profil på iPhone først";

/* Updating Watch app */
"Updating..." = "Opdaterer...";

/* Header for Temp targets in Watch app */
"Temp Targets" = "Midlertidige Mål";

/* Delete carbs from data table and Nightscout */
"Delete Carbs?" = "Slet kulhydrater?";

/* Delete insulin from pump history and Nightscout */
"Delete Insulin?" = "Slet insulin?";

/* Treatments list */
"Treatments" = "Behandlinger";

/* " min" in Treatments list */
" min" = " min";

/* */
"Unable to change anything" = "Kunne ikke ændre noget";


/* Calendar and Libre transmitter settings ---------------
 */
/* */
"Configure Libre Transmitter" = "Konfigurer Libre Sender";

/* */
"Calibrations" = "Kalibreringer";

/* */
"Create Events in Calendar" = "Lav Begivenheder i Kalender";

/* */
"Calendar" = "Kalender";

/* Automatic delivered treatments */
"Automatic" = "Automatisk";

/* External insulin treatments */
"External" = "Ekstern";

/* */
"Other" = "Andet";

/* */
"Libre Transmitter" = "Libre Sender";

/* */
"Libre Transmitters" = "Libre Sendere";

/* */
"Bluetooth Transmitters" = "Bluetooth Sendere";

/* */
"Modes" = "Sendere";

/* Libre 2 Direct */
"Libre 2 Direct" = "Libre 2 Direct";

/* */
"Select the third party transmitter you want to connect to" = "Vælg den tredjeparts sensor du vil forbinde til";

/* State was restored */
"State was restored" = "Tilstand blev gendannet";

/* The short unit display string for millimoles of glucose per liter */
"mmol/L" = "mmol/L";

/* The short unit display string for milligrams of glucose per decilter */
"mg/dL" = "mg/dL";

/* */
"Add calibration" = "Tilføj kalibrering";

/* When adding capillary glucose meater reading */
"Meter glucose" = "Måler glucose";

/* */
"Info" = "Info";

/*v*/
"Slope" = "Hældning";

/* */
"Intercept" = "Intercept";

/* */
"Chart" = "Graf";

/* */
"Remove" = "Fjern";

/* */
"Remove Last" = "Fjern Sidste";

/* */
"Remove All" = "Fjern Alle";

/* */
"About the Process" = "Om Processen";

/* */
"Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working." = "Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working.";

/* */
"Pairinginfo" = "Pairinginfo";

/* */
"PatchInfo" = "PatchInfo";

/* */
"Calibrationinfo" = "Kalibreringsinfo";

/* */
"Unknown" = "Ukendt";

/* */
"Not paired yet" = "Endnu ikke parret";

/* */
"Pair Sensor & connect" = "Par Sensor & Forbind";

/* */
"Phone NFC required!" = "Telefon NFC påkrævet!";

/* */
"Your phone or app is not enabled for NFC communications, which is needed to pair to libre2 sensors" = "Din telefon eller app er ikke aktiveret til NFC-kommunikation, som er nødvendig for at parre til libre2 sensorer";

/* Bluetooth Power Off */
"Bluetooth Power Off" = "Bluetooth Slået Fra";

/* Please turn on Bluetooth */
"Please turn on Bluetooth" = "Slå Bluetooth til";

/* No Libre Transmitter Selected */
"No Libre Transmitter Selected" = "Ingen Libre Sensor Valgt";

/* Delete Transmitter and start anew. */
"Delete CGMManager and start anew. Your libreoopweb credentials will be preserved" = "Delete CGMManager and start anew. Your libreoopweb credentials will be preserved";

/* Invalid libre checksum */
"Invalid libre checksum" = "Ugyldig libre checksum";

/* Libre sensor was incorrectly read, CRCs were not valid */
"Libre sensor was incorrectly read, CRCs were not valid" = "Libre sensor was incorrectly read, CRCs were not valid";

/* Glucose */
"Glucose" = "Glukose";

/* LOWALERT! */
"LOWALERT!" = "LAVALARM!";

/* HIGHALERT! */
"HIGHALERT!" = "HØJALARM!";

/* (Snoozed)*/
"(Snoozed)" = "(Udsat)";

/* Glucose: %@ */
"Glucose: %@" = "Glukose: %@";

/* Transmitter: %@%% */
"Transmitter: %@%%" = "Sensor: %@%%";

/* No Sensor Detected */
"No Sensor Detected" = "Ingen Sensor Fundet";

/* This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor */
"This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor" = "This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor";

/* New Sensor Detected */
"New Sensor Detected" = "Ny Sensor Fundet";

/* Please wait up to 30 minutes before glucose readings are available! */
"Please wait up to 30 minutes before glucose readings are available!" = "Vent op til 30 minutter før der er gluokoseaflæsninger tilgængelige!";

/* Invalid Glucose sample detected, try again later */
"Invalid Glucose sample detected, try again later" = "Ugyldig glukoseprøve opdaget, prøv igen senere";

/* ensor might have temporarily stopped, fallen off or is too cold or too warm */
"Sensor might have temporarily stopped, fallen off or is too cold or too warm" = "Sensoren er muligvis midlertidigt stoppet, faldet af eller er for kold eller for varm";

/* Invalid Sensor Detected */
"Invalid Sensor Detected" = "Ugyldig Sensor Detekteret";

/* Detected sensor seems not to be a libre 1 sensor! */
"Detected sensor seems not to be a libre 1 sensor!" = "Detekteret sensor synes ikke at være en libre 1 sensor!";

/* Detected sensor is invalid: %@ */
"Detected sensor is invalid: %@" = "Detekteret sensor er ugyldig: %@";

/* Low Battery */
"Low battery" = "Lavt batteri";

/* */
"Invalid sensor" = "Ugyldig sensor";

/* */
"Sensor change" = "Sensor skifte";

/* */
"Sensor expires soon" = "Sensor udløber snart";

/* Battery is running low %@, consider charging your %@ device as soon as possible */
"Battery is running low %@, consider charging your %@ device as soon as possible" = "Lavt batteriniveau %@, lad venligst din %@ enhed snarest muligt";

/* Extracting calibrationdata from sensor */
"Extracting calibrationdata from sensor" = "Extracting calibrationdata from sensor";

/* Sensor Ending Soon */
"Sensor Ending Soon" = "Sensor Udløber Snart";

/* Current Sensor is Ending soon! Sensor Life left in %@ */
"Current Sensor is Ending soon! Sensor Life left in %@" = "Current Sensor is Ending soon! Sensor Life left in %@";

/* */
"Libre Bluetooth" = "Libre Bluetooth";

/* */
"Snooze Alerts" = "Udsæt Alarmer";

/* */
"Last measurement" = "Sidste måling";

/* */
"Sensor Footer checksum" = "Sensor Footer checksum";

/* */
"Last Blood Sugar prediction" = "Last Blood Sugar prediction";

/* */
"CurrentBG" = "CurrentBG";

/* */
"Sensor Info" = "Sensor Info";

/* */
"Sensor Age" = "Sensor Alder";

/* */
"Sensor Age Left" = "Sensor Tid Tilbage";

/* */
"Sensor Endtime" = "Sensor Sluttid";

/* */
"Sensor State" = "Sensortilstand";

/* */
"Sensor Serial" = "Sensor Serienummer";

/* */
"Transmitter Info" = "Senderinfo";

/* */
"Hardware" = "Hardware";

/* */
"Firmware" = "Firmware";

/* */
"Connection State" = "Tilslutningstilstand";

/* */
"Transmitter Type" = "Sender Type";

/* */
"Sensor Type" = "Sensor Type";

/* */
"Factory Calibration Parameters" = "Fabrikskalibreringsparametre";

/* */
"Valid for footer" = "Gyldig til footer";

/* */
"Edit calibrations" = "Rediger kalibreringer";

/* */
"edit calibration clicked" = "redigere kalibrering klikket";

/* */
"Delete CGM" = "Slet CGM";

/* */
"Are you sure you want to remove this cgm from loop?" = "Er du sikker på at du vil fjerne denne CGM fra iAPS?";

/* */
"There is no undo" = "Der er ingen fortryd";

/* */
"Advanced" = "Avanceret";

/* */
"Alarms" = "Alarmer";

/* */
"Glucose Settings" = "Glukose Indstillinger";

/* */
"Notifications" = "Notifikationer";

/* */
"Export logs" = "Eksporter logs";

/* */
"Export not available" = "Eksport ikke tilgængelig";

/* */
"Log export requires ios 15" = "Log eksport kræver iOS 15";

/* */
"Got it!" = "Modtaget!";

/* */
"Saved to %@" = "Gem til %@";

/* */
"No logs available" = "Ingen logs tilgængelige";

/* */
"Glucose Notification visibility" = "Synlighed af Glukose Notifikation";

/* */
"Always Notify Glucose" = "Send altid Glukosenotifikation";

/* */
"Notify per reading" = "Notify per reading";

/* */
"Value" = "Værdi";

/* */
"Adds Phone Battery" = "Tilføjer Telefonbatteri";

/* */
"Adds Transmitter Battery" = "Tilføjer Senderbatteri";

/* */
"Also vibrate" = "Vibrér også";

/* */
"Additional notification types" = "Yderligere notifikationstyper";

/* */
"Misc" = "Diverse";

/* */
"Unit override" = "Unit override";

/* */
"Low" = "Lav";

/* */
"High" = "Høj";

/* */
"glucose" = "glukose";

/* */
"Schedule " = "Skema ";

/* */
"tapped save schedules" = "tapped save schedules";

/* */
"Error" = "Fejl";

/* */
"Some ui element was incorrectly specified" = "Some ui element was incorrectly specified";

/* */
"Success" = "Succes";

/* */
"Schedules were saved successfully!" = "Schedules were saved successfully!";

/* */
"High Glucose Alarm active" = "High Glucose Alarm active";

/* */
"Low Glucose Alarm active" = "Low Glucose Alarm active";

/* */
"No Glucose Alarm active" = "No Glucose Alarm active";

/* */
"snoozing until %@" = "snoozing until %@";

/* */
"not snoozing" = "not snoozing";

/* */
"nothing to see here" = "nothing to see here";

/* */
"snooze from testview clicked" = "snooze from testview clicked";

/* */
"will snooze for %@ until %@" = "will snooze for %@ until %@";

/* */
"Click to Snooze Alerts" = "Click to Snooze Alerts";

/* */
"Strength" = "Styrke";

/* */
"Hold the top of your iPhone near the sensor to pair" = "Hold toppen af din iPhone nær sensoren for at parre";

/* */
"Sensor not found" = "Sensor ikke fundet";

/* */
"Also play alert sound" = "Afspil også alarm lyd";

/* */
"Notification Settings" = "Notifikationsindstillinger";

/* */
"Found devices: %d" = "Fundne enheder: %d";

/* */
"Backfill options" = "Backfill options";

/* */
"Backfilling from trend is currently not well supported by Loop" = "Backfilling from trend is currently not well supported by Loop";

/* */
"Backfill from history" = "Backfill from history";

/* */
"Backfill from trend" = "Backfill from trend";

/* */
"Debug options" = "Debug options";

/* */
"Adds a lot of data to the Issue Report " = "Adds a lot of data to the Issue Report ";

/* */
"Persist sensordata" = "Persist sensordata";

/* */
"Battery" = "Battery";

/* */
"Also add source info" = "Also add source info";

/* */
"Carbs Required Threshold" = "Carbs Required Threshold";

/* */
"Carbs required: %d g" = "Carbs required: %d g";

/* */
"To prevent LOW required %d g of carbs" = "To prevent LOW required %d g of carbs";

/* */
"iAPS not active" = "iAPS not active";

/* */
"Last loop was more than %d min ago" = "Last loop was more than %d min ago";

/* Glucose badge */
"Show glucose on the app badge" = "Show glucose on the app badge";

/* */
"Backfill glucose" = "Backfill glucose";

/* About this source */
"About this source" = "About this source";

/* */
"Bolus failed" = "Bolus failed";

/* "Max Bolus Exceeded label" */
"Max Bolus exceeded!" = "Max Bolus exceeded!";

/* */
"Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";

/* */
"Carbs" = "Carbs";

/* Food Type / Meal Note */
"Note" = "Note";

/* */
"Temp Basal" = "Temp Basal";

/* */
"Temp Target" = "Temp Target";

/* */
"Resume" = "Genoptag";

/* */
"Suspend" = "Suspender";

/* */
"Animated Background" = "Animeret Baggrund";

/* Sensor day(s) */
" day(s)" = " dag(e)";

/* Option to show HR in Watch app*/
"Display HR on Watch" = "Display HR on Watch";


/* Headers for settings ----------------------- */
"OpenAPS main settings" = "OpenAPS main settings";

"OpenAPS SMB settings" = "OpenAPS SMB settings";

"OpenAPS targets settings" = "OpenAPS targets settings";

"OpenAPS other settings" = "OpenAPS other settings";

/* Glucose Simulator CGM */
"Glucose Simulator" = "Glucose Simulator";

/* Restored state message */
"Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@" = "Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@";

/* Shared app group xDrip4iOS */
"Using shared app group with external CGM app xDrip4iOS" = "Using shared app group with external CGM app xDrip4iOS";

/* Shared app group GlucoseDirect */
"Using shared app group with external CGM app GlucoseDirect" = "Brug af delt app-gruppe med ekstern CGM app GlucoseDirect";

/* Dexcom G6 app */
"Dexcom G6 app" = "Dexcom G6 app";

/* Native G5 app */
"Native G5 app" = "Nativ G5 app";

/* Minilink transmitter */
"Minilink transmitter" = "Minilink sender";

/* Simple simulator */
"Simple simulator" = "Simpel simulator";

/* Direct connection with Libre 1 transmitters or Libre 2 */
"Direct connection with Libre 1 transmitters or European Libre 2 sensors" = "Direkte forbindelse med Libre 1-sendere eller europæiske Libre 2-sensorer";

/* Online or internal server */
"Online or internal server" = "Online eller intern server";

/* -------------- Developer settings ---------------------- */
/* Debug options */

"Developer" = "Udvikler";

/* Debug option view NS Upload Profile */
"NS Upload Profile" = "NS Upload Profil";

/* Debug option view NS Uploaded Profile */
"NS Uploaded Profile" = "NS Uploadet Profil";

/* Debug option view Autosense */
"Autosense" = "Autosense";

/* Insulin sensitivity config header */
"Dynamic Sensitivity" = "Dynamisk Sensitivitet";

/* Autotune config */
"Only Autotune Basal Insulin" = "Autotune kun Basal Insulin";

/* */
"Save as your Normal Basal Rates" = "Gem som dine normale basalsatser";

/* */
"Save on Pump" = "Gem på Pump";

/* Debug option view Pump History */
"Pump History" = "Pumpe Historie";

/* Debug option view Target Ranges */
"Target ranges" = "Målområder";

/* Debug option view Temp targets */
"Temp targets" = "Midlertidige mål";

/* Debug option view Meal */
"Meal" = "Måltid";

/* Debug option view Pump profile */
"Pump profile" = "Pumpeprofil";

/* Debug option view Profile */
"Profile" = "Profil";

/* Debug option view Enacted */
"Enacted" = "Udført";

/* Debug option view Announcements (from NS) */
"Announcements" = "Announcements";

/* Debug option view Enacted announcements announcements (from NS) */
"Enacted announcements" = "Enacted announcements";

/* Debug option view Autotune */
"Autotune" = "Autotune";

/* Debug option view Target presets */
"Target presets" = "Target presets";

/* Debug option view */
"Loop Cycles" = "Loop Cykler";

/* Debug option view Glucose Data used for statistics */
"Glucose Data used for statistics" = "Glukosedata anvendt til statistik";

/* --------------- HealthKit intergration --------------------*/
/* */
"Apple Health" = "Apple Health";

/* */
"Connect to Apple Health" = "Forbind til Apple Health";

/* Show when have not permissions for writing to Health */
"For write data to Apple Health you must give permissions in Settings > Health > Data Access" = "For at skrive til Apple Health er skal du give tilladelser i Indstillinger > Sundhed > Data Adgang";

/* */
"This allows iAPS to read from and write to Apple Heath. You must also give permissions in Settings > Health > Data Access. If you enter a glucose value into Apple Health, open iAPS to confirm it shows up." = "Dette gør det muligt for iAPS at læse fra og skrive til Apple Heath. Du skal også give tilladelser i Indstillinger > Sundhed > Dataadgang. Hvis du indtaster en glukoseværdi i Apple Health, skal du åbne iAPS for at bekræfte, at den dukker op.";

/* New ALerts ------------------------- */
/* Info title */
"Info" = "Info";

/* Warning title */
"Warning" = "Advarsel";

/* Error title */
"Error" = "Fejl";

/* Manual temp basal mode */
"Manual" = "Manuel";

/* An Automatic delivered bolus (SMB) */
"SMB" = "SMB";

/* A manually entered dose of external insulin */
"External Insulin" = "External Insulin";

/* Status highlight when manual temp basal is running. */
"Manual Basal" = "Manuel Basal";

/* Current Manual Temp basal */
" -  Manual Basal ⚠️" = " - Manuel Basal ⚠️";

/* Total AT / Scheduled basal insulin */
" U/day" = " E/dag";

/* Total AT / Scheduled basal insulin */
"Total" = "Total";

/* -------------------------------------------- FPU Strings ------------------------------------------------------*/
/* Enable FPU */

"Enable" = "Aktivér";

/* Header */
"Conversion settings" = "Indstillinger for konvertering";

/* Delay */
"Delay In Minutes" = "Forsinkelse I Minutter";

/* Duration */
"Maximum Duration In Hours" = "Maksimal Varighed I Timer";

/* Interval */
"Interval In Minutes" = "Interval I Minutter";

/* Override */
"Override With A Factor Of " = "Overskriv Med En Faktor Af ";

/* Description */
"Allows fat and protein to be converted into future carb equivalents using the Warsaw formula of kilocalories divided by 10.\n\nThis spreads the carb equivilants over a maximum duration setting that can be configured from 5-12 hours.\n\nDelay is time from now until the first future carb entry.\n\nInterval in minutes is how many minutes are between entries. The shorter the interval, the smoother the result. 10, 15, 20, 30, or 60 are reasonable choices.\n\nAdjustment factor is how much effect the fat and protein has on the entries. 1.0 is full effect (original Warsaw Method) and 0.5 is half effect. Note that you may find that your normal carb ratio needs to increase to a larger number if you begin adding fat and protein entries. For this reason, it is best to start with a factor of about 0.5 to ease into it.\n\nDefault settings: Time Cap: 8 h, Interval: 30 min, Factor: 0.5, Delay 60 min" = "Allows fat and protein to be converted into future carb equivalents using the Warsaw formula of kilocalories divided by 10.\n\nThis spreads the carb equivilants over a maximum duration setting that can be configured from 5-12 hours.\n\nDelay is time from now until the first future carb entry.\n\nInterval in minutes is how many minutes are between entries. The shorter the interval, the smoother the result. 10, 15, 20, 30, or 60 are reasonable choices.\n\nAdjustment factor is how much effect the fat and protein has on the entries. 1.0 is full effect (original Warsaw Method) and 0.5 is half effect. Note that you may find that your normal carb ratio needs to increase to a larger number if you begin adding fat and protein entries. For this reason, it is best to start with a factor of about 0.5 to ease into it.\n\nDefault settings: Time Cap: 8 h, Interval: 30 min, Factor: 0.5, Delay 60 min";

/* FPU Settings Title */
"Fat and Protein" = "Fedt og Protein";

/* Display fat and protein entities */
"Fat & Protein" = "Fedt & Protein";

/* */
"Hide Fat & Protein" = "Skjul Fedt & Protein";

/* Add Fat */
"Fat" = "Fedt";

/* Add Protein */
"Protein" = "Protein";

/* Service Section */
"Fat And Protein Conversion" = "Fedt Og Protein Konvertering";

/* Service Section */
"Profile Override" = "Profile Override";

/* */
"Override Profiles" = "Override Profiles";

/* */
"Normal " = "Normal ";

"Currently no Override active" = "Currently no Override active";

/* */
"Total Insulin Adjustment" = "Total Insulin Adjustment";

/* */
"Override your Basal, ISF, CR and Target profiles" = "Override your Basal, ISF, CR and Target profiles";

/* */
"Enable indefinitely" = "Enable indefinitely";

/* */
"Override Profile target" = "Override Profile target";

/* */
"Disable SMBs" = "Disable SMBs";

/* Your normal Profile. Use a short string */
"Normal Profile" = "Normal Profile";

/* Custom but unsaved Profile */
"Custom Profile" = "Custom Profile";

/* */
"Profiles" = "Profiles";

/* */
"More options" = "More options";

/* */
"Schedule when SMBs are Off" = "Schedule when SMBs are Off";

/* */
"Change ISF and CR" = "Change ISF and CR";

/* */
"Change ISF" = "Change ISF";

/* */
"Change CR" = "Change CR";

/* */
"SMB Minutes" = "SMB Minutes";

/* */
"UAM SMB Minutes" = "UAM SMB Minutes";

/* */
"Start new Profile" = "Start new Profile";

/* */
"Save as Profile" = "Save as Profile";

/* */
"Return to Normal" = "Return to Normal";

/* Alert */
"Return to Normal?" = "Return to Normal?";

/* */
"This will change settings back to your normal profile." = "This will change settings back to your normal profile.";

/* Start Profile Alert */
"Start Profile" = "Start Profil";

/* */
"Your profile basal insulin will be adjusted with the override percentage and your profile ISF and CR will be inversly adjusted with the percentage." = "Your profile basal insulin will be adjusted with the override percentage and your profile ISF and CR will be inversly adjusted with the percentage.";

/* */
"Starting this override will change your Profiles and/or your Target Glucose used for looping during the entire selected duration. Tapping ”Start Profile” will start your new profile or edit your current active profile." = "Starting this override will change your Profiles and/or your Target Glucose used for looping during the entire selected duration. Tapping ”Start Profile” will start your new profile or edit your current active profile.";

/* Change Target glucose in profile settings */
"Override Profile Target" = "Override Profile Target";

/* Alert string. Keep spaces. */
" SMBs are disabled either by schedule or during the entire duration." = " SMBs are disabled either by schedule or during the entire duration.";

/* Alert strings. Keep spaces */
" infinite duration." = " infinite duration.";

/* Service Section */
"App Icons" = "Appikoner";

/* */
"iAPS Icon" = "iAPS Ikon";

/* Service Section */
"Statistics and Home View" = "Statistics and Home View";

/* Alert text */
"Delete Carb Equivalents?" = "Delete Carb Equivalents?";

/* */
"Meal Presets" = "Meal Presets";

/* */
"Empty" = "Tom";

/* */
"Delete Selected Preset" = "Delete Selected Preset";

/* */
"Enter Meal Preset Name" = "Enter Meal Preset Name";

/* */
"Name Of Dish" = "Navn på ret";

/* Save Carbs and continue to bolus recommendation */
"Save and continue" = "Gem og fortsæt";

/* */
"Save as Preset" = "Gem som forudindstilling";

/* */
"Predictions" = "Predictions";

/* Watch Config Option */
"Display Protein & Fat" = "Display Protein & Fat";

/* ----------------------- New Bolus Calculator ---------------------------*/
/* Warning about bolus recommendation. Title */

"Warning!" = "Advarsel!";

/* Alert to confirm bolus amount to add */
"\n\nTap 'Add' to continue with selected amount." = "\n\nTryk 'Tilføj' for at fortsætte med den valgte mængde.";

/* */
"Eventual Glucose" = "Eventuelt Glukoseniveau";

/* */
"Please wait" = "Please wait";

/* */
"Glucose, " = "Glucose, ";

/* */
"Target Glucose" = "Target Glucose";

/* */
"Percentage setting" = "Percentage setting";

/* */
"Insulin Sensitivity" = "Insulin Sensitivity";

/* Formula displayed in Bolus info pop-up. Make translation short! */
"(Eventual Glucose - Target) / ISF" = "(Eventual Glucose - Target) / ISF";

/* */
"Formula:" = "Formula:";

/* Bolus pop-up footer */
"Carbs and previous insulin are included in the glucose prediction, but if the Eventual Glucose is lower than the Target Glucose, a bolus will not be recommended." = "Carbs and previous insulin are included in the glucose prediction, but if the Eventual Glucose is lower than the Target Glucose, a bolus will not be recommended.";

/* Hide pop-up */
"Hide" = "Skjul";

/* Bolus pop-up / Alert string. Make translations concise! */
"Eventual Glucose > Target Glucose, but glucose is predicted to drop down to " = "Eventual Glucose > Target Glucose, but glucose is predicted to first drop down to ";

/* Bolus pop-up / Alert string. Make translations concise! */
"which is below your Threshold (" = "which is below your Threshold (";

/* Bolus pop-up / Alert string. Make translations concise! */
"Eventual Glucose > Target Glucose, but glucose is climbing slower than expected. Expected: " = "Eventual Glucose > Target Glucose, but glucose is climbing slower than expected. Expected: ";

//* Bolus pop-up / Alert string. Make translations concise! */
". Climbing: " = ". Climbing: ";

/* Bolus pop-up / Alert string. Make translations concise! */
"Eventual Glucose > Target Glucose, but glucose is falling faster than expected. Expected: " = "Eventual Glucose > Target Glucose, but glucose is falling faster than expected. Expected: ";

/* Bolus pop-up / Alert string. Make translations concise! */
". Falling: " = ". Falling: ";

/* Bolus pop-up / Alert string. Make translations concise! */
"Eventual Glucose > Target Glucose, but glucose is changing faster than expected. Expected: " = "Eventual Glucose > Target Glucose, but glucose is changing faster than expected. Expected: ";

/* Bolus pop-up / Alert string. Make translations concise! */
". Changing: " = ". Changing: ";

/* Add insulin without bolusing alert */
" without bolusing" = " without bolusing";

/* -------------------------------------------------------------------------------------------
  DASH strings
*/
"Attach Pod" = "Attach Pod";

"Deactivate Pod" = "Deaktiver Pod";

/* */
"Deactivating..." = "Deactivating...";

"Pair Pod" = "Par Pod";

/* Text for previous pod information row */
"Previous Pod Information" = "Forringe Pod Information";

/* Text for confidence reminders navigation link */
"Confidence Reminders" = "Confidence Reminders";

"Confidence reminders are beeps from the Pod which can be used to acknowledge selected commands when the Pod is not silenced." = "Confidence reminders are beeps from the Pod which can be used to acknowledge selected commands when the Pod is not silenced.";

/* button title for saving low reservoir reminder while saving */
"Saving..." = "Gemmer...";

/* button title for saving low reservoir reminder */
"Save" = "Gem";

/* Alert title for error when updating confidence reminder preference */
"Failed to update confidence reminder preference." = "Failed to update confidence reminder preference.";

/* */
"No Error" = "Ingen fejl";

/* description label for active time pod details row */
"Active Time" = "Aktiv Tid";

/* Title string for BeepPreference.silent */
"Disabled" = "Deaktiveret";

/* Title string for BeepPreference.manualCommands */
"Enabled" = "Aktiveret";

/* Title string for BeepPreference.extended */
"Extended" = "Forlænget";

/* Description for BeepPreference.silent */
"No confidence reminders are used." = "No confidence reminders are used.";

/* Description for BeepPreference.manualCommands */
"Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When the app automatically adjusts delivery, no confidence reminders are used." = "Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When the app automatically adjusts delivery, no confidence reminders are used.";

/* Description for BeepPreference.extended */
"Confidence reminders will sound when the app automatically adjusts delivery as well as for commands you initiate." = "Confidence reminders will sound when the app automatically adjusts delivery as well as for commands you initiate.";

/* Label text for expiration reminder default row */
"Expiration Reminder Default" = "Expiration Reminder Default";

/* */
"Expiration Reminder" = "Udløbs Påmindelse";

/* */
"Low Reservoir" = "Low Reservoir";

/* Value text for no expiration reminder */
"No Reminder" = "No Reminder";

/* */
"Scheduled Reminder" = "Scheduled Reminder";

/* */
"Low Reservoir Reminder" = "Low Reservoir Reminder";

/* The action string on pod status page when pod data is stale */
"Make sure your phone and pod are close to each other. If communication issues persist, move to a new area." = "Make sure your phone and pod are close to each other. If communication issues persist, move to a new area.";
/* Format string for the action string on pod status page when pod expired. (1: service time remaining) */
"Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains." = "Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains.";

/* Label text for temporary basal rate summary */
"Rate" = "Værdi";

/* Summary string for temporary basal rate configuration page */
"%1$@ for %2$@" = "%1$@ for %2$@";

/* Description text on manual temp basal action sheet */
"Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled." = "Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled.";
/* Button text for setting manual temporary basal rate*/
"Set Temporary Basal" = "Set Temporary Basal";

/* Navigation Title for ManualTempBasalEntryView */
"Temporary Basal" = "Midlertidig Basal";

/* Alert title for a failure to set temporary basal */
"Temporary Basal Failed" = "Temporary Basal Failed";

/* Alert format string for a failure to set temporary basal with recovery suggestion. (1: error description) (2: recovery text) */
"Unable to set a temporary basal rate: %1$@\n\n%2$@" = "Unable to set a temporary basal rate: %1$@\n\n%2$@";

/* Alert format string for a failure to set temporary basal. (1: error description) */
"Unable to set a temporary basal rate: %1$@" = "Unable to set a temporary basal rate: %1$@";

/* Alert title for missing temp basal configuration */
"Missing Config" = "Missing Config";

/* Alert format string for missing temp basal configuration. */
"This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate." = "This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate.";

/* description label for active time pod details row */
"Active Time" = "Aktiv Tid";

/* description label for total delivery pod details row */
"Total Delivery" = "Total Delivery";

/* */
"Add Omnipod Dash" = "Add Omnipod Dash";

/* */
"Insert Cannula" = "Indfør kanyle";

/* */
"Check Cannula" = "Check Cannula";

/* */
"Setup Complete" = "Setup Complete";

/* */
"Insulin Suspended" = "Insulin Suspended";

/* Text for suspend resume button when insulin delivery is suspending */
"Suspending insulin delivery..." = "Suspending insulin delivery...";

/* Text for suspend resume button when insulin delivery is suspended */
"Resume Insulin Delivery" = "Resume Insulin Delivery";

/* Text for suspend resume button when insulin delivery is resuming */
"Resuming insulin delivery..." = "Resuming insulin delivery...";

/* Alert title for suspend error */
"Failed to Suspend Insulin Delivery" = "Failed to Suspend Insulin Delivery";

//* -----------------------------------------------------------------------*/
/* ----------------------Statistics strings -------------------------------*/
/* */


"Today" = "Today";

/* */
"Day" = "Dag";

/* */
"Week" = "Uge";

/* */
"Month" = "Måned";

/* */
"Total" = "Total";

/* Headline Statistics */
"Statistics" = "Statistik";

/* Option in preferences */
"Allow Upload of Statistics to NS" = "Tillad Upload af Statistik til NS";

/* Low Glucose Threshold in Statistics settings */
"Low" = "Lav";

/* High Glucose Threshold in Statistics settings */
"High" = "Høj";

/* In Range */
"In Range" = "In Range";

/* Display % */
"Change HbA1c Unit" = "Skift HbA1c Enhed";

/* */
"Display Chart X - Grid lines" = "Display Chart X - Grid lines";

/* */
"Display Chart Y - Grid lines" = "Display Chart Y - Grid lines";

/* */
"Display Chart Threshold lines for Low and High" = "Display Chart Threshold lines for Low and High";

/* */
"Standing / Laying TIR Chart" = "Standing / Laying TIR Chart";

/* */
"Hours X-Axis (6 default)" = "Hours X-Axis (6 default)";

/* Average BG = */
"Average" = "Average";

/* Median BG */
"Median" = "Median";

/* CGM readings in statView */
"Readings" = "Readings";

/* CGM readings in statView */
"Readings / 24h" = "Readings / 24h";

/* Days of saved readings*/
"Days" = "Dage";

/* Normal BG (within TIR) */
"Normal" = "Normal";

/* Title High BG in statPanel */
"High (>" = "Høj (>";

/* Title Low BG in statPanel */
"Low (<" = "Lav (<";

/* SD */
"SD" = "SA";

/* CV */
"CV" = "CV";

/* Estimated HbA1c */
"HbA1c" = "HbA1c";

/* Total number of days of data for HbA1c estimation, part 1/2*/
"All" = "Alle";

/* Total number of days of data for HbA1c estimation, part 2/2*/
"days" = "dage";

/* Nr of Loops in statPanel */
"Loops" = "Looper";

/* Loop Errors in statPanel */
"Errors" = "Fejl";

/* Average loop interval */
"Interval" = "Interval";

/* Median loop interval */
"Duration" = "Varighed";

/* "Display SD */
"Display SD instead of CV" = "Display SD instead of CV";

/* Description for display SD */
"Display Standard Deviation (SD) instead of Coefficient of Variation (CV) in statPanel" = "Display Standard Deviation (SD) instead of Coefficient of Variation (CV) in statPanel";

/* How often to update the statistics */
"Update every number of minutes:" = "Opdater hvert antal minutter:";

/* Description for update interval for statistics */
"Default is 20 minutes. How often to update and save the statistics.json and to upload last array, when enabled, to Nightscout." = "Default is 20 minutes. How often to update and save the statistics.json and to upload last array, when enabled, to Nightscout.";

/* Duration displayed in statPanel */
"Past 24 Hours " = "Sidste 24 Timer ";

/* Duration displayed in statPanel */
"Past Week " = "Sidste Uge ";

/* Duration displayed in statPanel */
"Past Month " = "Sidste Måned ";

/* Duration displayed in statPanel */
"Past 90 Days " = "Sidste 90 Dage ";

/* Duration displayed in statPanel */
"All Past Days of Data " = "Alle Tidligere Dages Data ";

/* "Display Loop statistics in statPanel */
"Display Loop Cycle statistics" = "Display Loop Cycle statistics";

/* Description for Display Loop statistics */
"Displays Loop statistics in the statPanel in Home View" = "Displays Loop statistics in the statPanel in Home View";

/* Description for Override HbA1c unit */
"Change default HbA1c unit in statPanlel. The unit in statPanel will be updateded with next statistics.json update" = "Change default HbA1c unit in statPanlel. The unit in statPanel will be updateded with next statistics.json update";

/* HbA1c for all glucose storage days */
"all" = "all";

/* --------------------------------------------------------  Dexcom G7 --------------------------------------*/

"CGM Configuration" = "CGM Configuration";

"Heartbeat" = "Heartbeat";

"CGM address :" = "CGM address :";

"CGM is not used as heartbeat." = "CGM is not used as heartbeat.";

"Are you sure you want to delete this CGM?" = "Are you sure you want to delete this CGM?";

/* New Experimental feature */
"Experimental" = "Experimental";
/* Smoothing of CGM readings */
"Smooth Glucose Value" = "Smooth Glucose Value";

/* -----------------------------------------------------------------------------------------------------------

  Infotexts from openaps.docs and androidaps.docs
  iAPS
*/
/* Headline Rewind Resets Autosens */

"Rewind Resets Autosens" = "Rewind Resets Autosens";

/* ”Rewind Resets Autosens” */
"This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature." = "This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature.";

/* Headline "High Temptarget Raises Sensitivity" */
"High Temptarget Raises Sensitivity" = "High Temptarget Raises Sensitivity";

/* ”High Temptarget Raises Sensitivity" */
"Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160)." = "Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160).";

/* Headline ”Low Temptarget Lowers Sensitivity" */
"Low Temptarget Lowers Sensitivity" = "Low Temptarget Lowers Sensitivity";

/* ”Low Temptarget Lowers Sensitivity" */
"Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160)." = "Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160).";

/* Headline ”Sensitivity Raises Target" */
"Sensitivity Raises Target" = "Sensitivity Raises Target";

/* ”Sensitivity Raises Target" */
"When true, raises BG target when autosens detects sensitivity" = "When true, raises BG target when autosens detects sensitivity";

/* Headline ”Resistance Lowers Target" */
"Resistance Lowers Target" = "Resistance Lowers Target";

/* ”Resistance Lowers Target" */
"Defaults to false. When true, will lower BG target when autosens detects resistance" = "Defaults to false. When true, will lower BG target when autosens detects resistance";

/* Headline ”Advanced Target Adjustments" */
"Advanced Target Adjustments" = "Advanced Target Adjustments";

/* ”Advanced Target Adjustments" */
"This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone." = "This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone.";

/* Headline "Exercise Mode" */
"Exercise Mode" = "Exercise Mode";

/* "Exercise Mode" */
"Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity" = "Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity";

/* Headline "Wide BG Target Range" */
"Wide BG Target Range" = "Wide BG Target Range";

/* "Wide BG Target Range" */
"Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs." = "Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs.";

/* Headline "Skip Neutral Temps" */
"Skip Neutral Temps" = "Skip Neutral Temps";

/* "Skip Neutral Temps" */
"Defaults to false, so that iAPS will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means iAPS will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications from the 'rig', that may wake you up during the night." = "Defaults to false, so that iAPS will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means OpenAPS will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications form the 'rig', that may wake you up during the night. ";

/* Headline "Unsuspend If No Temp” */
"Unsuspend If No Temp" = "Unsuspend If No Temp";

/* "Unsuspend If No Temp” */
"Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended." = "Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended.";

/* Headline "Enable UAM" */
"Enable UAM" = "Enable UAM";

/* "Enable UAM" */
"With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell iAPS about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier." = "With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell iAPS about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier.";

/* Headline "Enable SMB With COB" */
"Enable SMB With COB" = "Enable SMB With COB";

/* Enable SMB With COB" */
"This enables supermicrobolus (SMB) while carbs on board (COB) are positive." = "This enables supermicrobolus (SMB) while carbs on board (COB) are positive.";

/* Headline "Enable SMB With Temptarget” */
"Enable SMB With Temptarget" = "Enable SMB With Temptarget";

/* "Enable SMB With Temptarget” */
"This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB." = "This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB.";

/* Headline "Enable SMB Always" */
"Enable SMB Always" = "Enable SMB Always";

/* "Enable SMB Always" */
"Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget)." = "Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget).";

/* Headline "Enable SMB After Carbs" */
"Enable SMB After Carbs" = "Enable SMB After Carbs";

/* "Enable SMB After Carbs" */
"Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB)." = "Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB).";

/* Enable "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* Headline "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* "Allow SMB With High Temptarget" */
"Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets (> 100 mg/dl)." = "Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets (> 100 mg/dl).";

/* Headline "Use Custom Peak Time” */
"Use Custom Peak Time" = "Use Custom Peak Time";

/* "Use Custom Peak Time” */
"Defaults to false. Setting to true allows changing insulinPeakTime" = "Defaults to false. Setting to true allows changing insulinPeakTime";

/* Headline "Suspend Zeros IOB” */
"Suspend Zeros IOB" = "Suspend Zeros IOB";

/* "Suspend Zeros IOB” */
"Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added." = "Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added.";

/* Headline "Max IOB" */
"Max IOB" = "Max IOB";

/* "Max IOB" */
"Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop)." = "Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop).";

/* Headline "Max Daily Safety Multiplier" */
"Max Daily Safety Multiplier" = "Max Daily Safety Multiplier";

/* "Max Daily Safety Multiplier" */
"This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune.";

/* Headline "Current Basal Safety Multiplier" */
"Current Basal Safety Multiplier" = "Current Basal Safety Multiplier";

/* "Current Basal Safety Multiplier" */
"This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune.";

/* Headline "Autosens Max" */
"Autosens Max" = "Autosens Max";

/* "Autosens Max" */
"This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target." = "This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target.";

/* Headline "Autosens Min" */
"Autosens Min" = "Autosens Min";

/* "Autosens Min" */
"The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets." = "The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets.";

/* Headline "Half Basal Exercise Target" */
"Half Basal Exercise Target" = "Half Basal Exercise Target";

/* "Half Basal Exercise Target" */
"Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes." = "Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes.";

/* Headline "Max COB" */
"Max COB" = "Max COB";

/* "Max COB" */
"The default of maxCOB is 120. (If someone enters more carbs in one or multiple entries, iAPS will cap COB to maxCOB and keep it at maxCOB until the carbs entered above maxCOB have shown to be absorbed. Essentially, this just limits UAM as a safety cap against weird COB calculations due to fluky data.)" = "The default of maxCOB is 120. (If someone enters more carbs in one or multiple entries, iAPS will cap COB to maxCOB and keep it at maxCOB until the carbs entered above maxCOB have shown to be absorbed. Essentially, this just limits UAM as a safety cap against weird COB calculations due to fluky data.)";

/* Headline "Bolus Snooze DIA Divisor" */
"Bolus Snooze DIA Divisor" = "Bolus Snooze DIA Divisor";

/* "Bolus Snooze DIA Divisor" */
"Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2)." = "Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2).";

/* Headline "Min 5m Carbimpact" */
"Min 5m Carbimpact" = "Min 5m Carbimpact";

/* "Min 5m Carbimpact" */
"This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g." = "This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g.";

/* Headline "Autotune ISF Adjustment Fraction" */
"Autotune ISF Adjustment Fraction" = "Autotune ISF Adjustment Fraction";

/* "Autotune ISF Adjustment Fraction" */
"The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF." = "The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF.";

/* Headline "Remaining Carbs Fraction" */
"Remaining Carbs Fraction" = "Remaining Carbs Fraction";

/* "Remaining Carbs Fraction" */
"This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption.";

/* Headline "Remaining Carbs Cap" */
"Remaining Carbs Cap" = "Remaining Carbs Cap";

/* "Remaining Carbs Cap" */
"This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption.";

/* Headline ”Max SMB Basal Minutes" */
"Max SMB Basal Minutes" = "Max SMB Basal Minutes";

/* ”Max SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs.";

/* Headline "Max UAM SMB Basal Minutes" */
"Max UAM SMB Basal Minutes" = "Max UAM SMB Basal Minutes";

/* "Max UAM SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs.";

/* Headline "SMB Interval" */
"SMB Interval" = "SMB Interval";

/* "SMB Interval" */
"Minimum duration in minutes for new SMB since last SMB or manual bolus" = "Minimum duration in minutes for new SMB since last SMB or manual bolus";

/* Headline "Bolus Increment" */
"Bolus Increment" = "Bolus Increment";

/* "Bolus Increment" */
"Smallest enacted SMB amount. Minimum amount for Omnipod pumps is 0.05 U, whereas for Medtronic pumps it differs for various models, from 0.025 U to 0.10 U. Please check the minimum bolus amount which can be delivered by your pump. The default value is 0.1." = "Smallest enacted SMB amount. Minimum amount for Omnipod pumps is 0.05 U, whereas for Medtronic pumps it differs for various models, from 0.025 U to 0.10 U. Please check the minimum bolus amount which can be delivered by your pump. The default value is 0.1.";

/* Headline "Insulin Peak Time" */
"Insulin Peak Time" = "Insulin Peak Time";

/* "Insulin Peak Time" */
"Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with iAPS, longer loop calculations and possible red loops." = "Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with iAPS, longer loop calculations and possible red loops.";

/* Headline "Carbs Req Threshold" */
"Carbs Req Threshold" = "Carbs Req Threshold";

/* "Carbs Req Threshold" */
"Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold." = "Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold.";

/* Headline "Noisy CGM Target Multiplier" */
"Noisy CGM Target Multiplier" = "Noisy CGM Target Multiplier";

/* "Noisy CGM Target Multiplier" */
"Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data" = "Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data";

/* Headline "SMB DeliveryRatio" */
"SMB DeliveryRatio" = "SMB DeliveryRatio";

/* SMB DeliveryRatio */
"Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution." = "Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution.";

// Dynamic ISF + CR Settings:
/* Headline "Adjust Dynamic ISF constant" */

"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Enable Dynamic ISF, Headline */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Headline "Enable Dynamic ISF" */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Enable Dynamic ISF */
"Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes" = "Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes";

/* Headline "Enable Dynamic CR" */
"Enable Dynamic CR" = "Enable Dynamic CR";

/* Enable Dynamic CR */
"Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)" = "Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)";

/* Headline "Adjust Dynamic ISF constant" */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ratios by a constant. Default is 0.5. The higher the value, the larger the correction of your ISF will be for a high or a low BG. Maximum correction is determined by the Autosens min/max settings. For Sigmoid function an adjustment factor of 0.4 - 0.5 is recommended to begin with. For the logaritmic formula there is less consensus, but starting with 0.5 - 0.8 is more appropiate for most users" = "Adjust Dynamic ratios by a constant. Default is 0.5. The higher the value, the larger the correction of your ISF will be for a high or a low BG. Maximum correction is determined by the Autosens min/max settings. For Sigmoid function an adjustment factor of 0.4 - 0.5 is recommended to begin with. For the logaritmic formula threre is less consensus, but starting with 0.5 - 0.8 is more appropiate for most users";


/* Headline "Use Sigmoid Function" */
"Use Sigmoid Function" = "Use Sigmoid Function";

/* Use Sigmoid Function */
"Use a sigmoid function for ISF (and for CR, when enabled), instead of the default Logarithmic formula. Requires the Dynamic ISF setting to be enabled in settings\n\nThe Adjustment setting adjusts the slope of the curve (Y: Dynamic ratio, X: Blood Glucose). A lower value ==> less steep == less aggressive.\n\nThe autosens.min/max settings determines both the max/min limits for the dynamic ratio AND how much the dynamic ratio is adjusted. If AF is the slope of the curve, the autosens.min/max is the height of the graph, the Y-interval, where Y: dynamic ratio. The curve will always have a sigmoid shape, no matter which autosens.min/max settings are used, meaning these settings have big consequences for the outcome of the computed dynamic ISF. Please be careful setting a too high autosens.max value. With a proper profile ISF setting, you will probably never need it to be higher than 1.5\n\nAn Autosens.max limit > 1.5 is not advisable when using the sigmoid function." = "Use a sigmoid function for ISF (and for CR, when enabled), instead of the default Logarithmic formula. Requires the Dynamic ISF setting to be enabled in settings\n\nThe Adjustment setting adjusts the slope of the curve (Y: Dynamic ratio, X: Blood Glucose). A lower value ==> less steep == less aggressive.\n\nThe autosens.min/max settings determines both the max/min limits for the dynamic ratio AND how much the dynamic ratio is adjusted. If AF is the slope of the curve, the autosens.min/max is the height of the graph, the Y-interval, where Y: dynamic ratio. The curve will always have a sigmoid shape, no matter which autosens.min/max settings are used, meaning these settings have big consequences for the outcome of the computed dynamic ISF. Please be careful setting a too high autosens.max value. With a proper profile ISF setting, you will probably never need it to be higher than 1.5\n\nAn Autosens.max limit > 1.5 is not advisable when using the sigmoid function.";


/* Headline "Threshold Setting" */
"Threshold Setting (mg/dl)" = "Threshold Setting (mg/dl)";

/* Threshold Setting */
"The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl." = "The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl.";

/* Headline "Weighted Average of TDD. Weight of past 24 hours:" */
"Weighted Average of TDD. Weight of past 24 hours:" = "Weighted Average of TDD. Weight of past 24 hours:";

/* Weight of past 24 hours of insulin */
"Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment)." = "Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment).";

/* Headline "Adjust basal" */
"Adjust basal" = "Adjust basal";

/* Enable adjustment of basal profile */
"Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD" = "Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD";

/* Headline "Max Delta-BG Threshold SMB" */
"Max Delta-BG Threshold SMB" = "Max Delta-BG Threshold SMB";

/* Max Delta-BG Threshold SMB */
"Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!)." = "Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!).";

/* Headline "... When Blood Glucose Is Over (mg/dl):" */
"... When Blood Glucose Is Over (mg/dl):" = "... When Blood Glucose Is Over (mg/dl):";

/* ... When Blood Glucose Is Over (mg/dl): */
"Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable." = "Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable.";

/* Headline "Enable SMB With High BG" */
"Enable SMB With High BG" = "Enable SMB With High BG";

/* "Enable SMB With High BG" */
"Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)" = "Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)";

/* Headline "Dynamic settings" */
"Dynamic settings" = "Dynamic settings";

/* Insulin curve */
"Insulin curve" = "Insulin curve";

/* Headline "Adjustment Factor" */
"Adjustment Factor" = "Adjustment Factor";