Trio/FreeAPS/Sources/Localizations/Main/pl.lproj/Localizable.strings

/*
  Localizable.strings
  FreeAPS X
*/
/* -------------------------------- */
/* Bolus screen when adding insulin */
"Add insulin without actually bolusing" = "Add insulin without actually bolusing";

/* Add insulin from source outside of pump */
"Add %@ without bolusing" = "Dodaj %@ bez bolusa";

"Bolus" = "Bolus";

"Close" = "Zamknij";

/* Continue after added carbs without bolus */
"Continue without bolus" = "Kontynuuj bez bolusa";

/* Header */
"Enact Bolus" = "Enact Bolus";

/* Button */
"Enact bolus" = "Enact bolus";

/*  */
"Insulin recommended" = "Zalecana ilość insuliny";

/*  */
"Insulin required" = "Potrzebna ilość insuliny";

/* Bolus screen */
"Recommendation" = "Recommendation";

/* Button */
"Clear" = "Usuń";

/* Button */
"Done" = "Done";

/*  */
"Wait please" = "Proszę czekać";

/*  */
"Agree and continue" = "Zaakceptuj i kontynuuj";

/* Headline in enacted pop up (at: at what time) */
"Enacted at" = "Enacted at";

/* Headline in suggested pop up (at: at what time) */
"Suggested at" = "Suggested at";

/* Home title */
"Home" = "Home";

/* Looping in progress */
"looping" = "looping";

/* min ago since last loop */
"min ago" = "minut temu";

/* Status Title */
"No suggestion" = "Brak sugestii";

/* Replace pod text in Header */
"Replace pod" = "Wymień Pod";

/* Add carbs screen */
"Add Carbs" = "Dodaj węglowodany";

/* Add carbs header and button in Watch app. You can skip the last " " space. It's just for differentiation */
"Add Carbs " = "Add Carbs ";

/*  */
"Amount Carbs" = "Amount Carbs";

/* Grams unit */
"grams" = "gramy";

/*  */
"Carbs required" = "Carbs required";

/* */
"Are you sure?" = "Czy jesteś pewien?";

/* Bottom target temp */
"Bottom target" = "Bottom target";

/* Cancel preset name */
"Cancel" = "Anuluj";

/*  */
"Cancel Temp Target" = "Anuluj tymczasowy cel";

/* Custom temp target */
"Custom" = "Dostosuj";

/*  */
"Date" = "Data";

/*  */
"Delete" = "Usuń";

/* Delete preset temp target */
"Delete preset \"%@\"" = "Usuń profil %@";

/* Duration of target temp or temp basal */
"Duration" = "Czas trwania";

/*  */
"Enact Temp Target" = "Enact Temp Target";

/*  */
"Enter preset name" = "Wpisz nazwę profilu";

/* Preset name */
"Name" = "Name";

/* minutes of target temp */
"minutes" = "minut";

/*  */
"Presets" = "Profile";

/* Save preset name */
"Save" = "Zapisz";

/*  */
"Save as preset" = "Zapisz jako profil";

/* Upper temp target limit */
"Top target" = "Górna wartość docelowa";

/*  Temp target set for ... minutes */
"for" = "for";

/*  Temp target set for ... minutes */
"min" = "min.";

/*  */
"Autotune" = "Autotune";

/*  */
"Basal profile" = "Profil bazy";

/*  */
"Carb ratio" = "Carb ratio";

/*  */
"Delete autotune data" = "Usuń dane autotune";

/*  */
"Run now" = "Uruchom teraz";

/*  */
"Last run" = "Last run";

/*  */
"Sensitivity" = "Wrażliwość";

/*  */
"Use Autotune" = "użyj autotune";

/* Add profile basal */
"Add" = "Dodaj";

/*  */
"Basal Profile" = "Profil bazy";

/* Rate basal profile */
"Rate" = "Rate";

/*  */
"Save on Pump" = "Zapisz na pompie";

/*  */
"Saving..." = "Zapisywanie...";

/*  */
"Schedule" = "Schedule";

/*  */
"starts at" = "starts at";

/* Time basal profile */
"Time" = "Czas";

/* */
"Calculated Ratio" = "Calculated Ratio";

/* Carb Ratios header */
"Carb Ratios" = "Carb Ratios";

/*  */
"Ratio" = "Ratio";

/*  */
"Autosens" = "Autosens";

/*  */
"Calculated Sensitivity" = "Obliczona wrażliwość";

/*  */
"Insulin Sensitivities" = "Wrażliwość na insulinę";

/* */
"Sensitivity Ratio" = "Współczynnik wrażliwości";

/*  */
"Dismiss" = "Zignoruj";

/*  */
"Important message" = "Important message";

/*  */
"Amount" = "Amount";

/* */
"Cancel Temp Basal" = "Anuluj bazę tymczasową";

/* Enact
Enact a temp Basal or a temp target */
"Enact" = "Enact";

/* */
"Manual Temp Basal" = "Manual Temp Basal";

/* Allow uploads tp NS */
"Allow uploads" = "Allow uploads";

/* API secret in NS */
"API secret" = "API secret";

/* Connect to NS */
"Connect" = "Połącz";

/* Connected to NS */
"Connected!" = "Połączono
Połączono z Nightscout!";

/* Connecting to NS */
"Connecting..." = "Łączenie...
Łączenie z Nightscout...";

/*  */
"Invalid URL" = "Nieprawidłowy adres URL";

/*  */
"Local glucose source" = "Local glucose source";

/* Header */
"Nightscout Config" = "Konfiguracja Nightscout";

/*  */
"Port" = "Port";

/*  */
"URL" = "URL";

/**/
"Use local glucose server" = "Use local glucose server";

/*  */
"Edit settings json" = "Edit settings json";

/* */
"Glucose units" = "Glucose units";

/*  */
"Preferences" = "Preferences";

/* Recommended Insulin Fraction in preferences */
"Recommended Insulin Fraction" = "Recommended Insulin Fraction";

/* Do you want to show bolus screen after added carbs? */
"Skip Bolus screen after carbs" = "Skip Bolus screen after carbs";

/* Allow remote control from NS */
"Remote control" = "Remote control";

/* Add Medtronic pump */
"Add Medtronic" = "Add Medtronic";

/* Add Omnipod pump */
"Add Omnipod" = "Add Omnipod";

/* Add Simulator pump */
"Add Simulator" = "Add Simulator";

/* Insulin model */
"Model" = "Model";

/*  */
"Pump config" = "Pump config";

/*  */
"Delivery limits" = "Delivery limits";

/*  */
"Duration of Insulin Action" = "Duration of Insulin Action";

/* hours of duration of insulin activity */
"hours" = "hours";

/* Max setting */
"Max Basal" = "Max Basal";

/* Max setting */
"Max Bolus" = "Max Bolus";

/* */
"Pump Settings" = "Pump Settings";

/* Insulin unit per hour */
"U/hr" = "U/hr";

/* Unit in number of units delivered (keep the space character!) */
" U" = " U";

/* /Insulin unit */
"/U" = "/U";

/* Insulin unit */
"U" = "U";

/* Unit per hour with space */
" U/hr" = " U/hr";

/* Number of units per hour*/
"%@ U/hr" = "%@ j./godz";

/* Number of units insulin delivered */
"%@ U" = "%@ j.";

/*Carb ratio unit */
"g/U" = "g/U";

/* grams */
" g" = " g";

/* The short unit display string for grams */
"g" = "g";

/* when 0 U/hr */
"0 U/hr" = "0 U/hr";

/* abbreviation for days */
"d" = "d";

/* abbreviation for hours */
"h" = "godz";

/* abbreviation for minutes */
"m" = "min.";

/*  */
"Closed loop" = "Closed loop";

/* */
"Configuration" = "Configuration";

/* */
"Devices" = "Devices";

/*  */
"Pump" = "Pump";

/*  */
"Services" = "Services";

/*  */
"Settings" = "Settings";

/* 2 log files to share */
"Share logs" = "Share logs";

/* Upper target */
"High target" = "High target";

/* Lower target */
"Low target" = "Low target";

/*  */
"Target Ranges" = "Target Ranges";

/* When bolusing */
"Bolusing" = "Bolusing";

/* */
"Pump suspended" = "Pump suspended";

/* */
"Middleware" = "Middleware";

/* Header */
"History" = "History";

/* CGM option */
"Upload glucose to Nightscout" = "Upload glucose to Nightscout";

/* Type of CGM or glucose source */
"Type" = "Type";

/* CGM */
"CGM" = "CGM";

/* CGM Transmitter ID */
"Transmitter ID" = "Transmitter ID";

/* Other CGM setting */
"Other" = "Other";

/* Whatch app alert */
"Set temp targets presets on iPhone first" = "Set temp targets presets on iPhone first";

/* Updating Watch app */
"Updating..." = "Updating...";

/* Header for Temp targets in Watch app */
"Temp Targets" = "Temp Targets";

/* Delete carbs from Treatments list*/
"Delete carbs?" = "Delete carbs?";

/* Treatments list */
"Treatments" = "Treatments";

/* " min" in Treatments list */
" min" = " min";

/* */
"Unable to change anything" = "Unable to change anything";


/* Calendar and Libre transmitter settings ---------------
 */
/* */
"Configure Libre Transmitter" = "Configure Libre Transmitter";

/* */
"Calibrations" = "Calibrations";

/* */
"Create events in calendar" = "Create events in calendar";

/* */
"Calendar" = "Calendar";

/* */
"Other" = "Other";

/* */
"Libre Transmitter" = "Libre Transmitter";

/* */
"Libre Transmitters" = "Libre Transmitters";

/* */
"Bluetooth Transmitters" = "Bluetooth Transmitters";

/* */
"Modes" = "Modes";

/* Libre 2 Direct */
"Libre 2 Direct" = "Libre 2 Direct";

/* */
"Select the third party transmitter you want to connect to" = "Select the third party transmitter you want to connect to";

/* State was restored */
"State was restored" = "State was restored";

/* The short unit display string for millimoles of glucose per liter */
"mmol/L" = "mmol/L";

/* The short unit display string for milligrams of glucose per decilter */
"mg/dL" = "mg/dL";

/* */
"Add calibration" = "Add calibration";

/* When adding capillary glucose meater reading */
"Meter glucose" = "Meter glucose";

/* */
"Info" = "Info";

/*v*/
"Slope" = "Slope";

/* */
"Intercept" = "Intercept";

/* */
"Chart" = "Chart";

/* */
"Remove" = "Remove";

/* */
"Remove Last" = "Remove Last";

/* */
"Remove All" = "Remove All";

/* */
"About the Process" = "About the Process";

/* */
"Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working." = "Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working.";

/* */
"Pairinginfo" = "Pairinginfo";

/* */
"PatchInfo" = "PatchInfo";

/* */
"Calibrationinfo" = "Calibrationinfo";

/* */
"Unknown" = "Nieznana";

/* */
"Not paired yet" = "Not paired yet";

/* */
"Pair Sensor & connect" = "Pair Sensor & connect";

/* */
"Phone NFC required!" = "Phone NFC required!";

/* */
"Your phone or app is not enabled for NFC communications, which is needed to pair to libre2 sensors" = "Your phone or app is not enabled for NFC communications, which is needed to pair to libre2 sensors";

/* Bluetooth Power Off */
"Bluetooth Power Off" = "Bluetooth Power Off";

/* Please turn on Bluetooth */
"Please turn on Bluetooth" = "Please turn on Bluetooth";

/* No Libre Transmitter Selected */
"No Libre Transmitter Selected" = "No Libre Transmitter Selected";

/* Delete Transmitter and start anew. */
"Delete CGMManager and start anew. Your libreoopweb credentials will be preserved" = "Delete CGMManager and start anew. Your libreoopweb credentials will be preserved";

/* Invalid libre checksum */
"Invalid libre checksum" = "Invalid libre checksum";

/* Libre sensor was incorrectly read, CRCs were not valid */
"Libre sensor was incorrectly read, CRCs were not valid" = "Libre sensor was incorrectly read, CRCs were not valid";

/* Glucose */
"Glucose" = "Glucose";

/* LOWALERT! */
"LOWALERT!" = "LOWALERT!";

/* HIGHALERT! */
"HIGHALERT!" = "HIGHALERT!";

/* (Snoozed)*/
"(Snoozed)" = "(Snoozed)";

/* Glucose: %@ */
"Glucose: %@" = "Glucose: %@";

/* Transmitter: %@%% */
"Transmitter: %@%%" = "Transmitter: %@%%";

/* No Sensor Detected */
"No Sensor Detected" = "No Sensor Detected";

/* This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor */
"This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor" = "This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor";

/* New Sensor Detected */
"New Sensor Detected" = "New Sensor Detected";

/* Please wait up to 30 minutes before glucose readings are available! */
"Please wait up to 30 minutes before glucose readings are available!" = "Please wait up to 30 minutes before glucose readings are available!";

/* Invalid Glucose sample detected, try again later */
"Invalid Glucose sample detected, try again later" = "Invalid Glucose sample detected, try again later";

/* ensor might have temporarily stopped, fallen off or is too cold or too warm */
"Sensor might have temporarily stopped, fallen off or is too cold or too warm" = "Sensor might have temporarily stopped, fallen off or is too cold or too warm";

/* Invalid Sensor Detected */
"Invalid Sensor Detected" = "Invalid Sensor Detected";

/* Detected sensor seems not to be a libre 1 sensor! */
"Detected sensor seems not to be a libre 1 sensor!" = "Detected sensor seems not to be a libre 1 sensor!";

/* Detected sensor is invalid: %@ */
"Detected sensor is invalid: %@" = "Detected sensor is invalid: %@";

/* Low Battery */
"Low battery" = "Low battery";

/* */
"Invalid sensor" = "Invalid sensor";

/* */
"Sensor change" = "Sensor change";

/* */
"Sensor expires soon" = "Sensor expires soon";

/* Battery is running low %@, consider charging your %@ device as soon as possible */
"Battery is running low %@, consider charging your %@ device as soon as possible" = "Battery is running low %@, consider charging your %@ device as soon as possible";

/* Extracting calibrationdata from sensor */
"Extracting calibrationdata from sensor" = "Extracting calibrationdata from sensor";

/* Sensor Ending Soon */
"Sensor Ending Soon" = "Sensor Ending Soon";

/* Current Sensor is Ending soon! Sensor Life left in %@ */
"Current Sensor is Ending soon! Sensor Life left in %@" = "Current Sensor is Ending soon! Sensor Life left in %@";

/* */
"Libre Bluetooth" = "Libre Bluetooth";

/* */
"Snooze Alerts" = "Snooze Alerts";

/* */
"Last measurement" = "Last measurement";

/* */
"Sensor Footer checksum" = "Sensor Footer checksum";

/* */
"Last Blood Sugar prediction" = "Last Blood Sugar prediction";

/* */
"CurrentBG" = "CurrentBG";

/* */
"Sensor Info" = "Sensor Info";

/* */
"Sensor Age" = "Sensor Age";

/* */
"Sensor Age Left" = "Sensor Age Left";

/* */
"Sensor Endtime" = "Sensor Endtime";

/* */
"Sensor State" = "Sensor State";

/* */
"Sensor Serial" = "Sensor Serial";

/* */
"Transmitter Info" = "Transmitter Info";

/* */
"Hardware" = "Hardware";

/* */
"Firmware" = "Oprogramowanie";

/* */
"Connection State" = "Status połączenia";

/* */
"Transmitter Type" = "Transmitter Type";

/* */
"Sensor Type" = "Sensor Type";

/* */
"Factory Calibration Parameters" = "Factory Calibration Parameters";

/* */
"Valid for footer" = "Valid for footer";

/* */
"Edit calibrations" = "Edit calibrations";

/* */
"edit calibration clicked" = "edit calibration clicked";

/* */
"Delete CGM" = "Delete CGM";

/* */
"Are you sure you want to remove this cgm from loop?" = "Are you sure you want to remove this cgm from loop?";

/* */
"There is no undo" = "There is no undo";

/* */
"Advanced" = "Advanced";

/* */
"Alarms" = "Alarmy";

/* */
"Glucose Settings" = "Glucose Settings";

/* */
"Notifications" = "Notifications";

/* */
"Export logs" = "Export logs";

/* */
"Export not available" = "Export not available";

/* */
"Log export requires ios 15" = "Log export requires ios 15";

/* */
"Got it!" = "Got it!";

/* */
"Saved to %@" = "Saved to %@";

/* */
"No logs available" = "No logs available";

/* */
"Glucose Notification visibility" = "Glucose Notification visibility";

/* */
"Always Notify Glucose" = "Always Notify Glucose";

/* */
"Notify per reading" = "Notify per reading";

/* */
"Value" = "Value";

/* */
"Adds Phone Battery" = "Adds Phone Battery";

/* */
"Adds Transmitter Battery" = "Adds Transmitter Battery";

/* */
"Also vibrate" = "Also vibrate";

/* */
"Additional notification types" = "Additional notification types";

/* */
"Misc" = "Misc";

/* */
"Unit override" = "Unit override";

/* */
"Low" = "Low";

/* */
"High" = "High";

/* */
"glucose" = "glucose";

/* */
"Schedule " = "Schedule ";

/* */
"tapped save schedules" = "tapped save schedules";

/* */
"Error" = "Error";

/* */
"Some ui element was incorrectly specified" = "Some ui element was incorrectly specified";

/* */
"Success" = "Success";

/* */
"Schedules were saved successfully!" = "Schedules were saved successfully!";

/* */
"High Glucose Alarm active" = "High Glucose Alarm active";

/* */
"Low Glucose Alarm active" = "Low Glucose Alarm active";

/* */
"No Glucose Alarm active" = "No Glucose Alarm active";

/* */
"snoozing until %@" = "snoozing until %@";

/* */
"not snoozing" = "not snoozing";

/* */
"nothing to see here" = "nothing to see here";

/* */
"snooze from testview clicked" = "snooze from testview clicked";

/* */
"will snooze for %@ until %@" = "will snooze for %@ until %@";

/* */
"Click to Snooze Alerts" = "Click to Snooze Alerts";

/* */
"Strength" = "Strength";

/* */
"Hold the top of your iPhone near the sensor to pair" = "Hold the top of your iPhone near the sensor to pair";

/* */
"Sensor not found" = "Sensor not found";

/* */
"Also play alert sound" = "Also play alert sound";

/* */
"Notification Settings" = "Notification Settings";

/* */
"Found devices: %d" = "Found devices: %d";

/* */
"Backfill options" = "Backfill options";

/* */
"Backfilling from trend is currently not well supported by Loop" = "Backfilling from trend is currently not well supported by Loop";

/* */
"Backfill from history" = "Backfill from history";

/* */
"Backfill from trend" = "Backfill from trend";

/* */
"Debug options" = "Debug options";

/* */
"Adds a lot of data to the Issue Report " = "Adds a lot of data to the Issue Report ";

/* */
"Persist sensordata" = "Persist sensordata";

/* */
"Battery" = "Battery";

/* */
"Also add source info" = "Also add source info";

/* */
"Carbs Required Threshold" = "Carbs Required Threshold";

/* */
"Carbs required: %d g" = "Carbs required: %d g";

/* */
"To prevent LOW required %d g of carbs" = "To prevent LOW required %d g of carbs";

/* */
"FreeAPS X not active" = "FreeAPS X not active";

/* */
"Last loop was more then %d min ago" = "Last loop was more then %d min ago";

/* Glucose badge */
"Show glucose on the app badge" = "Show glucose on the app badge";

/* */
"Backfill glucose" = "Backfill glucose";

/* About this source */
"About this source" = "About this source";

/* */
"Bolus failed" = "Bolus failed";

/* */
"Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";

/* */
"Carbs" = "Carbs";

/* */
"Temp Basal" = "Temp Basal";

/* */
"Temp Target" = "Temp Target";

/* */
"Resume" = "Resume";

/* */
"Suspend" = "Suspend";

/* */
"Animated Background" = "Animated Background";

/* Sensor day(s) */
" day(s)" = " day(s)";

/* Option to show HR in Watch app*/
"Display HR on Watch" = "Display HR on Watch";


/* Headers for settings ----------------------- */
"OpenAPS main settings" = "OpenAPS main settings";

"OpenAPS SMB settings" = "OpenAPS SMB settings";

"OpenAPS targets settings" = "OpenAPS targets settings";

"OpenAPS other settings" = "OpenAPS other settings";

/* Glucose Simulator CGM */
"Glucose Simulator" = "Glucose Simulator";

/* Restored state message */
"Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@" = "Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@";

/* Shared app group xDrip4iOS */
"Using shared app group with external CGM app xDrip4iOS" = "Using shared app group with external CGM app xDrip4iOS";

/* Shared app group GlucoseDirect */
"Using shared app group with external CGM app GlucoseDirect" = "Using shared app group with external CGM app GlucoseDirect";

/* Dexcom G6 app */
"Dexcom G6 app" = "Dexcom G6 app";

/* Native G5 app */
"Native G5 app" = "Native G5 app";

/* Minilink transmitter */
"Minilink transmitter" = "Minilink transmitter";

/* Simple simulator */
"Simple simulator" = "Simple simulator";

/* Direct connection with Libre 1 transmitters or Libre 2 */
"Direct connection with Libre 1 transmitters or European Libre 2 sensors" = "Direct connection with Libre 1 transmitters or European Libre 2 sensors";

/* Online or internal server */
"Online or internal server" = "Online or internal server";

/* -------------- Developer settings ---------------------- */
/* Debug options */

"Developer" = "Developer";

/* Debug option view NS Upload Profile */
"NS Upload Profile" = "NS Upload Profile";

/* Debug option view NS Uploaded Profile */
"NS Uploaded Profile" = "NS Uploaded Profile";

/* Debug option view Autosense */
"Autosense" = "Autosense";

/* Debug option view Pump History */
"Pump History" = "Pump History";

/* Debug option view Target Ranges */
"Target ranges" = "Target ranges";

/* Debug option view Temp targets */
"Temp targets" = "Temp targets";

/* Debug option view Meal */
"Meal" = "Meal";

/* Debug option view Pump profile */
"Pump profile" = "Pump profile";

/* Debug option view Profile */
"Profile" = "Profile";

/* Debug option view Enacted */
"Enacted" = "Enacted";

/* Debug option view Announcements (from NS) */
"Announcements" = "Announcements";

/* Debug option view Enacted announcements announcements (from NS) */
"Enacted announcements" = "Enacted announcements";

/* Debug option view Autotune */
"Autotune" = "Autotune";

/* Debug option view Target presets */
"Target presets" = "Target presets";

/* Debug option view */
"Loop Cycles" = "Loop Cycles";

/* Debug option view Glucose Data used for statistics */
"Glucose Data used for statistics" = "Glucose Data used for statistics";

/* --------------- HealthKit intergration --------------------*/
/* */
"Apple Health" = "Apple Health";

/* */
"Connect to Apple Health" = "Connect to Apple Health";

/* Show when have not permissions for writing to Health */
"For write data to Apple Health you must give permissions in Settings > Health > Data Access" = "For write data to Apple Health you must give permissions in Settings > Health > Data Access";

/* */
"After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";

/* New ALerts ------------------------- */
/* Info title */
"Info" = "Info";

/* Warning title */
"Warning" = "Ostrzeżenie";

/* Error title */
"Error" = "Error";

/* Manual temp basal mode */
"Manual" = "Manual";

/* Status highlight when manual temp basal is running. */
"Manual Basal" = "Manual Basal";

/* Current Manual Temp basal */
" -  Manual Basal ⚠️" = " -  Manual Basal ⚠️";

/* Total AT / Scheduled basal insulin */
" U/day" = " U/day";

/* Total AT / Scheduled basal insulin */
"Total" = "Total";

/* ---------------------------------------
  DASH strings
*/
"Attach Pod" = "Attach Pod";

"Deactivate Pod" = "Dezaktywuj PODa";

/* */
"Deactivating..." = "Deactivating...";

"Pair Pod" = "Pair Pod";

/* Text for previous pod information row */
"Previous Pod Information" = "Previous Pod Information";

/* Text for confidence reminders navigation link */
"Confidence Reminders" = "Confidence Reminders";

"Confidence reminders are beeps from the pod which can be used to acknowledge selected commands." = "Confidence reminders are beeps from the pod which can be used to acknowledge selected commands.";

/* button title for saving low reservoir reminder while saving */
"Saving..." = "Zapisywanie...";

/* button title for saving low reservoir reminder */
"Save" = "Zapisz";

/* Alert title for error when updating confidence reminder preference */
"Failed to update confidence reminder preference." = "Failed to update confidence reminder preference.";

/* */
"No Error" = "No Error";

/* description label for active time pod details row */
"Active Time" = "Czas aktywny";

/* Title string for BeepPreference.silent */
"Disabled" = "Disabled";

/* Title string for BeepPreference.manualCommands */
"Enabled" = "Włączony";

/* Title string for BeepPreference.extended */
"Extended" = "Extended";

/* Description for BeepPreference.silent */
"No confidence reminders are used." = "No confidence reminders are used.";

/* Description for BeepPreference.manualCommands */
"Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When Loop automatically adjusts delivery, no confidence reminders are used." = "Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When Loop automatically adjusts delivery, no confidence reminders are used.";

/* Description for BeepPreference.extended */
"Confidence reminders will sound when Loop automatically adjusts delivery as well as for commands you initiate." = "Confidence reminders will sound when Loop automatically adjusts delivery as well as for commands you initiate.";

/* Label text for expiration reminder default row */
"Expiration Reminder Default" = "Expiration Reminder Default";

/* */
"Expiration Reminder" = "Przypomnienie o terminie ważności";

/* */
"Low Reservoir" = "Low Reservoir";

/* Value text for no expiration reminder */
"No Reminder" = "No Reminder";

/* */
"Scheduled Reminder" = "Scheduled Reminder";

/* */
"Low Reservoir Reminder" = "Low Reservoir Reminder";

/* The action string on pod status page when pod data is stale */
"Make sure your phone and pod are close to each other. If communication issues persist, move to a new area." = "Make sure your phone and pod are close to each other. If communication issues persist, move to a new area.";
/* Format string for the action string on pod status page when pod expired. (1: service time remaining) */
"Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains." = "Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains.";

/* Label text for temporary basal rate summary */
"Rate" = "Rate";

/* Summary string for temporary basal rate configuration page */
"%1$@ for %2$@" = "%1$@ for %2$@";

/* Description text on manual temp basal action sheet */
"Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled." = "Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled.";
/* Button text for setting manual temporary basal rate*/
"Set Temporary Basal" = "Set Temporary Basal";

/* Navigation Title for ManualTempBasalEntryView */
"Temporary Basal" = "Temporary Basal";

/* Alert title for a failure to set temporary basal */
"Temporary Basal Failed" = "Temporary Basal Failed";

/* Alert format string for a failure to set temporary basal with recovery suggestion. (1: error description) (2: recovery text) */
"Unable to set a temporary basal rate: %1$@\n\n%2$@" = "Unable to set a temporary basal rate: %1$@\n\n%2$@";

/* Alert format string for a failure to set temporary basal. (1: error description) */
"Unable to set a temporary basal rate: %1$@" = "Unable to set a temporary basal rate: %1$@";

/* Alert title for missing temp basal configuration */
"Missing Config" = "Missing Config";

/* Alert format string for missing temp basal configuration. */
"This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate." = "This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate.";

/* description label for active time pod details row */
"Active Time" = "Czas aktywny";

/* description label for total delivery pod details row */
"Total Delivery" = "Total Delivery";

/* */
"Add Omnipod Dash" = "Add Omnipod Dash";

/* */
"Insert Cannula" = "Wprowadź kaniulę";

/* */
"Check Cannula" = "Check Cannula";

/* */
"Setup Complete" = "Setup Complete";

/* */
"Insulin Suspended" = "Insulin Suspended";

/* Text for suspend resume button when insulin delivery is suspending */
"Suspending insulin delivery..." = "Suspending insulin delivery...";

/* Text for suspend resume button when insulin delivery is suspended */
"Resume Insulin Delivery" = "Resume Insulin Delivery";

/* Text for suspend resume button when insulin delivery is resuming */
"Resuming insulin delivery..." = "Resuming insulin delivery...";

/* Alert title for suspend error */
"Failed to Suspend Insulin Delivery" = "Failed to Suspend Insulin Delivery";

//* -----------------------------------------------------------------------*/
/* ----------------------Statistics strings -------------------------------*/
/* Headline Statistics */


"Statistics" = "Statistics";

/* Option in preferences */
"Display Statistics" = "Display Statistics";

/* infoText: Description for Display Statistics */
"Displays Statistics under the chart view" = "Displays Statistics under the chart view";

/* Low Glucose Limit option in preferences */
"Low Glucose Limit" = "Low Glucose Limit";

/* High Glucose Limit option in preferences */
"High Glucose Limit" = "High Glucose Limit";

/* infoText: Description for Low Glucose Limit */
"BG Under This Value Will Be Displayed As Low Glucose Percentage" = "BG Under This Value Will Be Displayed As Low Glucose Percentage";
/* infoText: Description for High Glucose Limit */
"BG Under This Value Will Be Displayed As High Glucose Percentage" = "BG Under This Value Will Be Displayed As High Glucose Percentage";

/* When statistics.json was last updated */
"Updated" = "Updated";

/* Average BG = */
"Average" = "Average";

/* Median BG */
"Median" = "Median";

/* Normal BG (within TIR) */
"Normal (24h)" = "Normal (24h)";

/* Title High BG in statPanel */
"High (>" = "High (>";

/* Title Low BG in statPanel */
"Low (<" = "Low (<";

/* HbA1c estimation for one day of data */
"HbA1c (24h)" = "HbA1c (24h)";

/* Total number of days of data for HbA1c estimation, part 1/2*/
"All " = "All ";

/* Total number of days of data for HbA1c estimation, part 2/2*/
" days" = " days";

/* Nr of loops last 24 hours */
"Loops" = "Loops";

/* Average loop interval */
"Average Interval" = "Avgerage Interval";

/* Median loop interval */
"Median Duration" = "Median Duration";

/* "Display SD */
"Display SD instead of CV" = "Display SD instead of CV";

/* Description for display SD */
"Display Standard Deviation (SD) instead of Coefficient of Variation (CV) in statPanel" = "Display Standard Deviation (SD) instead of Coefficient of Variation (CV) in statPanel";

/* How often to update the statistics */
"Update every number of minutes:" = "Update every number of minutes:";

/* Description for update interval for statistics */
"Default is 30 minutes. How often to update and save the statistics.json and to upload last array, when enabled, to Nightscout. A lower interval than for glucose updates (5 min) is pointless." = "Default is 30 minutes. How often to update and save the statistics.json and to upload last array, when enabled, to Nightscout. A lower interval than for glucose updates (5 min) is pointless.";

/* Duration displayed in statPanel */
"Past 24 Hours " = "Past 24 Hours ";

/* Duration displayed in statPanel */
"Past Week " = "Past Week ";

/* Duration displayed in statPanel */
"Past Month " = "Past Month ";

/* Duration displayed in statPanel */
"Past 90 Days " = "Past 90 Days ";

/* Duration displayed in statPanel */
"All Past Days of Data " = "All Past Days of Data ";

/* "Display Loop statistics in statPanel */
"Display Loop Cycle statistics" = "Display Loop Cycle statistics";

/* Description for Display Loop statistics */
"Displays Loop statistics in the statPanel in Home View" = "Displays Loop statistics in the statPanel in Home View";

/* Display % */
"Override HbA1c unit" = "Override HbA1c unit";

/* Description for Override HbA1c unit */
"Change default HbA1c unit in statPanlel. The unit in statPanel will be updateded with next statistics.json update" = "Change default HbA1c unit in statPanlel. The unit in statPanel will be updateded with next statistics.json update";

/* --------------------------------------

  Infotexts from openaps.docs and androidaps.docs
  FreeAPS X
*/
/* Headline Rewind Resets Autosens */

"Rewind Resets Autosens" = "Rewind Resets Autosens";

/* ”Rewind Resets Autosens” */
"This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature." = "This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature.";

/* Headline "High Temptarget Raises Sensitivity" */
"High Temptarget Raises Sensitivity" = "High Temptarget Raises Sensitivity";

/* ”High Temptarget Raises Sensitivity" */
"Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160)." = "Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160).";

/* Headline ”Low Temptarget Lowers Sensitivity" */
"Low Temptarget Lowers Sensitivity" = "Low Temptarget Lowers Sensitivity";

/* ”Low Temptarget Lowers Sensitivity" */
"Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160)." = "Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160).";

/* Headline ”Sensitivity Raises Target" */
"Sensitivity Raises Target" = "Sensitivity Raises Target";

/* ”Sensitivity Raises Target" */
"When true, raises BG target when autosens detects sensitivity" = "When true, raises BG target when autosens detects sensitivity";

/* Headline ”Resistance Lowers Target" */
"Resistance Lowers Target" = "Resistance Lowers Target";

/* ”Resistance Lowers Target" */
"Defaults to false. When true, will lower BG target when autosens detects resistance" = "Defaults to false. When true, will lower BG target when autosens detects resistance";

/* Headline ”Advanced Target Adjustments" */
"Advanced Target Adjustments" = "Advanced Target Adjustments";

/* ”Advanced Target Adjustments" */
"This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone." = "This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone.";

/* Headline "Exercise Mode" */
"Exercise Mode" = "Exercise Mode";

/* "Exercise Mode" */
"Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity" = "Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity";

/* Headline "Wide BG Target Range" */
"Wide BG Target Range" = "Wide BG Target Range";

/* "Wide BG Target Range" */
"Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs." = "Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs.";

/* Headline "Skip Neutral Temps" */
"Skip Neutral Temps" = "Skip Neutral Temps";

/* "Skip Neutral Temps" */
"Defaults to false, so that FreeAPS X will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means FreeAPS X will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications from the 'rig', that may wake you up during the night." = "Defaults to false, so that FreeAPS X will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means OpenAPS will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications form the 'rig', that may wake you up during the night. ";

/* Headline "Unsuspend If No Temp” */
"Unsuspend If No Temp" = "Unsuspend If No Temp";

/* "Unsuspend If No Temp” */
"Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended." = "Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended.";

/* Headline "Enable UAM" */
"Enable UAM" = "Enable UAM";

/* "Enable UAM" */
"With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell FreeAPS X about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier." = "With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell FreeAPS X about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier.";

/* Headline "Enable SMB With COB" */
"Enable SMB With COB" = "Enable SMB With COB";

/* Enable SMB With COB" */
"This enables supermicrobolus (SMB) while carbs on board (COB) are positive." = "This enables supermicrobolus (SMB) while carbs on board (COB) are positive.";

/* Headline "Enable SMB With Temptarget” */
"Enable SMB With Temptarget" = "Enable SMB With Temptarget";

/* "Enable SMB With Temptarget” */
"This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB." = "This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB.";

/* Headline "Enable SMB Always" */
"Enable SMB Always" = "Enable SMB Always";

/* "Enable SMB Always" */
"Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget)." = "Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget).";

/* Headline "Enable SMB After Carbs" */
"Enable SMB After Carbs" = "Enable SMB After Carbs";

/* "Enable SMB After Carbs" */
"Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB)." = "Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB).";

/* Enable "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* Headline "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* "Allow SMB With High Temptarget" */
"Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets (> 100 mg/dl)." = "Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets (> 100 mg/dl).";

/* Headline "Use Custom Peak Time” */
"Use Custom Peak Time" = "Use Custom Peak Time";

/* "Use Custom Peak Time” */
"Defaults to false. Setting to true allows changing insulinPeakTime" = "Defaults to false. Setting to true allows changing insulinPeakTime";

/* Headline "Suspend Zeros IOB” */
"Suspend Zeros IOB" = "Suspend Zeros IOB";

/* "Suspend Zeros IOB” */
"Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added." = "Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added.";

/* Headline "Max IOB" */
"Max IOB" = "Max IOB";

/* "Max IOB" */
"Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop)." = "Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop).";

/* Headline "Max Daily Safety Multiplier" */
"Max Daily Safety Multiplier" = "Max Daily Safety Multiplier";

/* "Max Daily Safety Multiplier" */
"This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune.";

/* Headline "Current Basal Safety Multiplier" */
"Current Basal Safety Multiplier" = "Current Basal Safety Multiplier";

/* "Current Basal Safety Multiplier" */
"This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune.";

/* Headline "Autosens Max" */
"Autosens Max" = "Autosens Max";

/* "Autosens Max" */
"This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target." = "This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target.";

/* Headline "Autosens Min" */
"Autosens Min" = "Autosens Min";

/* "Autosens Min" */
"The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets." = "The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets.";

/* Headline "Half Basal Exercise Target" */
"Half Basal Exercise Target" = "Half Basal Exercise Target";

/* "Half Basal Exercise Target" */
"Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes." = "Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes.";

/* Headline "Max COB" */
"Max COB" = "Max COB";

/* "Max COB" */
"This defaults maxCOB to 120 because that’s the most a typical body can absorb over 4 hours. (If someone enters more carbs or stacks more; OpenAPS will just truncate dosing based on 120. Essentially, this just limits AMA as a safety cap against weird COB calculations due to fluky data.)" = "This defaults maxCOB to 120 because that’s the most a typical body can absorb over 4 hours. (If someone enters more carbs or stacks more; OpenAPS will just truncate dosing based on 120. Essentially, this just limits AMA as a safety cap against weird COB calculations due to fluky data.)";

/* Headline "Bolus Snooze DIA Divisor" */
"Bolus Snooze DIA Divisor" = "Bolus Snooze DIA Divisor";

/* "Bolus Snooze DIA Divisor" */
"Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2)." = "Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2).";

/* Headline "Min 5m Carbimpact" */
"Min 5m Carbimpact" = "Min 5m Carbimpact";

/* "Min 5m Carbimpact" */
"This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g." = "This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g.";

/* Headline "Autotune ISF Adjustment Fraction" */
"Autotune ISF Adjustment Fraction" = "Autotune ISF Adjustment Fraction";

/* "Autotune ISF Adjustment Fraction" */
"The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF." = "The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF.";

/* Headline "Remaining Carbs Fraction" */
"Remaining Carbs Fraction" = "Remaining Carbs Fraction";

/* "Remaining Carbs Fraction" */
"This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption.";

/* Headline "Remaining Carbs Cap" */
"Remaining Carbs Cap" = "Remaining Carbs Cap";

/* "Remaining Carbs Cap" */
"This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption.";

/* Headline ”Max SMB Basal Minutes" */
"Max SMB Basal Minutes" = "Max SMB Basal Minutes";

/* ”Max SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs.";

/* Headline "Max UAM SMB Basal Minutes" */
"Max UAM SMB Basal Minutes" = "Max UAM SMB Basal Minutes";

/* "Max UAM SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs.";

/* Headline "SMB Interval" */
"SMB Interval" = "SMB Interval";

/* "SMB Interval" */
"Minimum duration in minutes between two enacted SMBs" = "Minimum duration in minutes between two enacted SMBs";

/* Headline "Bolus Increment" */
"Bolus Increment" = "Bolus Increment";

/* "Bolus Increment" */
"Smallest SMB / SMB increment in oref0. Minimum amount for Medtronic pumps is 0.1 U, whereas for Omnipod it’s 0.05 U. The default value is 0.1." = "Smallest SMB / SMB increment in oref0. Minimum amount for Medtronic pumps is 0.1 U, whereas for Omnipod it’s 0.05 U. The default value is 0.1.";

/* Headline "Insulin Peak Time" */
"Insulin Peak Time" = "Insulin Peak Time";

/* "Insulin Peak Time" */
"Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops." = "Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops.";

/* Headline "Carbs Req Threshold" */
"Carbs Req Threshold" = "Carbs Req Threshold";

/* "Carbs Req Threshold" */
"Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold." = "Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold.";

/* Headline "Noisy CGM Target Multiplier" */
"Noisy CGM Target Multiplier" = "Noisy CGM Target Multiplier";

/* "Noisy CGM Target Multiplier" */
"Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data" = "Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data";

/* Headline "SMB DeliveryRatio" */
"SMB DeliveryRatio" = "SMB DeliveryRatio";

/* SMB DeliveryRatio */
"Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution." = "Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution.";

// Dynamic ISF + CR Settings:
/* Headline "Adjust Dynamic ISF constant" */

"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Enable Dynamic ISF, Headline */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Headline "Enable Dynamic ISF" */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Enable Dynamic ISF */
"Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes" = "Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes";

/* Headline "Enable Dynamic CR" */
"Enable Dynamic CR" = "Enable Dynamic CR";

/* Enable Dynamic CR */
"Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)" = "Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)";

/* Headline "Adjust Dynamic ISF constant" */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ratios by a constant. Default is 1. Higher than 1 => lower ISF" = "Adjust Dynamic ratios by a constant. Default is 1. Higher than 1 => lower ISF";


/* Headline "Use Sigmoid Function" */
"Use Sigmoid Function" = "Use Sigmoid Function";

/* Use Sigmoid Function */
"Use a sigmoid function for ISF (and for CR, when enabled), instead of the Logarithmic formula. Is only used when the Dynamic ISF setting is enabled in settings\n\nThe autosens.min/max settings determines the power with which dynamic ratio is adjusted, the height of the graph (Y-interval, Y: Dynamic ratio) and where the sigmoid curve flattens out, thus also limiting how high and how low the the ISF can be adjusted.\n\nThe Adjustment settings adjusts the slope of the curve. A lower value ==> less steep == less aggressive.\n\nYour scheduled/autotuned ISF setting and your min BG target determines when Dynamic ratio = 1 (ISF unchanged), meaning when current BG = minimum target BG => new ISF will always be set to your current scheduled/autotuned ISF, unlike the default logarithmic formula.\n\nDynamic CR is used when the setting 'Enable Dynamic CR' is enabled in settings." = "Use a sigmoid function for ISF (and for CR, when enabled), instead of the Logarithmic formula. Is only used when the Dynamic ISF setting is enabled in settings\n\nThe autosens.min/max settings determines the power with which dynamic ratio is adjusted, the height of the graph (Y-interval, Y: Dynamic ratio) and where the sigmoid curve flattens out, thus also limiting how high and how low the the ISF can be adjusted.\n\nThe Adjustment settings adjusts the slope of the curve. A lower value ==> less steep == less aggressive.\n\nYour scheduled/autotuned ISF setting and your min BG target determines when Dynamic ratio = 1 (ISF unchanged), meaning when current BG = minimum target BG => new ISF will always be set to your current scheduled/autotuned ISF, unlike the default logarithmic formula.\n\nDynamic CR is used when the setting 'Enable Dynamic CR' is enabled in settings.";


/* Headline "Threshold Setting" */
"Threshold Setting (mg/dl)" = "Threshold Setting (mg/dl)";

/* Threshold Setting */
"The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl." = "The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl.";

/* Headline "Weighted Average of TDD. Weight of past 24 hours:" */
"Weighted Average of TDD. Weight of past 24 hours:" = "Weighted Average of TDD. Weight of past 24 hours:";

/* Weight of past 24 hours of insulin */
"Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment)." = "Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment).";

/* Headline "Adjust basal" */
"Adjust basal" = "Adjust basal";

/* Enable adjustment of basal profile */
"Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD" = "Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD";

/* Headline "Max Delta-BG Threshold SMB" */
"Max Delta-BG Threshold SMB" = "Max Delta-BG Threshold SMB";

/* Max Delta-BG Threshold SMB */
"Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!)." = "Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!).";

/* Headline "... When Blood Glucose Is Over (mg/dl):" */
"... When Blood Glucose Is Over (mg/dl):" = "... When Blood Glucose Is Over (mg/dl):";

/* ... When Blood Glucose Is Over (mg/dl): */
"Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable." = "Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable.";

/* Headline "Enable SMB With High BG" */
"Enable SMB With High BG" = "Enable SMB With High BG";

/* "Enable SMB With High BG" */
"Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)" = "Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)";

/* Headline "Dynamic settings" */
"Dynamic settings" = "Dynamic settings";

/* Insulin curve */
"Insulin curve" = "Insulin curve";

/* Headline "Adjustment Factor" */
"Adjustment Factor" = "Adjustment Factor";