Trio/FreeAPS/Sources/Localizations/Main/uk.lproj/Localizable.strings

/*
  Localizable.strings
  FreeAPS X
*/
/* Bolus screen when adding insulin */

"Add insulin without actually bolusing" = "Додати інсулін без подачі болюсу";

/* Add insulin from source outside of pump */
"Add %@ without bolusing" = "Подати %@ болюсу";

"Bolus" = "Болюс";

"Close" = "Закрити";

/* Continue after added carbs without bolus */
"Continue without bolus" = "Продовжити без болюсу";

/* Header */
"Enact Bolus" = "Подати Болюс";

/* Button */
"Enact bolus" = "Подати болюс";

/*  */
"Insulin recommended" = "Рекомендовано інсуліну";

/*  */
"Insulin required" = "Потрібно інсуліну";

/* Bolus screen */
"Recommendation" = "Рекомендація";

/* Button */
"Clear" = "Очистити";

/* Button */
"Done" = "Готово";

/*  */
"Wait please" = "Зачекайте";

/*  */
"Agree and continue" = "Прийняти і Продовжити";

/* Enacted at a date */
"Enacted at %@" = "Подано в %@";

/* Home title */
"Home" = "Головна";

/* Looping in progress */
"looping" = "в процесі";

/* min ago since last loop */
"min ago" = "хв тому";

/* Status Title */
"No suggestion" = "Нема рекомендацій";

/* Replace pod text in Header */
"Replace pod" = "Замініть под";

/* Suggested at a date */
"Suggested at %@" = "Рекомендовано в %@";

/* Add carbs screen */
"Add Carbs" = "Додати Вуглеводи";

/* Add carbs header and button in Watch app. You can skip the last " " space. It's just for differentiation */
"Add Carbs " = "Add Carbs ";

/*  */
"Amount Carbs" = "Кількість Вуглеводи";

/* Grams unit */
"grams" = "грами";

/*  */
"Carbs required" = "Введіть кількість вуглеводів";

/* */
"Are you sure?" = "Ви впевнені?";

/* Bottom target temp */
"Bottom target" = "Нижня ціль";

/* Cancel preset name */
"Cancel" = "Відмінити";

/*  */
"Cancel Temp Target" = "Відмінити тимчасову ціль";

/* Custom temp target */
"Custom" = "Своя";

/*  */
"Date" = "Дата";

/*  */
"Delete" = "Видалити";

/* Delete preset temp target */
"Delete preset \"%@\"" = "Видалити шаблон \"%@\"";

/* Duration of target temp or temp basal */
"Duration" = "Тривалість";

/*  */
"Enact Temp Target" = "Запустити тимчасову ціль";

/*  */
"Enter preset name" = "Введіть ім'я шаблону";

/* Preset name */
"Name" = "Ім’я";

/* minutes of target temp */
"minutes" = "хвилин";

/*  */
"Presets" = "Шаблони";

/* Save preset name */
"Save" = "Зберегти";

/*  */
"Save as preset" = "Зберегти як шаблон";

/* Upper temp target limit */
"Top target" = "Верхня ціль";

/*  */
"Autotune" = "Автотюн";

/*  */
"Basal profile" = "Базальний профіль";

/*  */
"Carb ratio" = "Вуглеводний коефіцієнт";

/*  */
"Delete autotune data" = "Видалити дані автотюну";

/*  */
"Run now" = "Виконати";

/*  */
"Last run" = "Останній запуск";

/*  */
"Sensitivity" = "Чутливість";

/*  */
"Use Autotune" = "використовувати Автотюн";

/* Add profile basal */
"Add" = "Додати";

/*  */
"Basal Profile" = "Базальний Профіль";

/* Rate basal profile */
"Rate" = "Коеф.";

/*  */
"Save on Pump" = "Зберегти на Помпі";

/*  */
"Saving..." = "Збереження...";

/*  */
"Schedule" = "Розклад";

/*  */
"starts at" = "починається об";

/* Time basal profile */
"Time" = "Час";

/* */
"Calculated Ratio" = "Розрахований Коефіцієнт";

/* Carb Ratios header */
"Carb Ratios" = "Вуглеводні Коефіцієнти";

/*  */
"Ratio" = "Коефіцієнт";

/*  */
"Autosens" = "Автосенс";

/*  */
"Calculated Sensitivity" = "Розрахована Чутливість";

/*  */
"Insulin Sensitivities" = "Чутливості до Інсуліну";

/* */
"Sensitivity Ratio" = "Коефіцієнт Чутливості";

/*  */
"Dismiss" = "Відхилити";

/*  */
"Important message" = "Важливе повідомлення";

/*  */
"Amount" = "Об'єм";

/* */
"Cancel Temp Basal" = "Відмінити ТБШ";

/* Enact
Enact a temp Basal or a temp target */
"Enact" = "Запустити";

/* */
"Manual Temp Basal" = "Ручний ТБШ";

/* Allow uploads tp NS */
"Allow uploads" = "Дозволити вивантаження";

/* API secret in NS */
"API secret" = "API секрет";

/* Connect to NS */
"Connect" = "Підключити";

/* Connected to NS */
"Connected!" = "Підключено!";

/* Connecting to NS */
"Connecting..." = "Підключення...";

/*  */
"Invalid URL" = "Невірний URL";

/*  */
"Local glucose source" = "Локальне джерело глюкози";

/* Header */
"Nightscout Config" = "Налаштування Nightscout";

/*  */
"Port" = "Порт";

/*  */
"URL" = "URL-адреса";

/**/
"Use local glucose server" = "Використовувати локальний сервер";

/*  */
"Edit settings json" = "Редагувати json налаштувань";

/* */
"Glucose units" = "Одиниці виміру глюкози";

/*  */
"Preferences" = "Параметри";

/* Recommended Insulin Fraction in preferences */
"Recommended Insulin Fraction" = "Рекомендований коефіцієнт інсуліну";

/* Do you want to show bolus screen after added carbs? */
"Skip Bolus screen after carbs" = "Пропустити Екран болюсу після вводу вуглеводів";

/* Allow remote control from NS */
"Remote control" = "Віддалене керування";

/* Add Medtronic pump */
"Add Medtronic" = "Додати Medtronic";

/* Add Omnipod pump */
"Add Omnipod" = "Додати Omnipod";

/* Add Simulator pump */
"Add Simulator" = "Додати Симулятор";

/* Insulin model */
"Model" = "Модель";

/*  */
"Pump config" = "Конфігурація помпи";

/*  */
"Delivery limits" = "Обмеження подачі";

/*  */
"Duration of Insulin Action" = "Тривалість Дії Інсуліну";

/* hours of duration of insulin activity */
"hours" = "годин";

/* Max setting */
"Max Basal" = "Макс Базал";

/* Max setting */
"Max Bolus" = "Макс Болюс";

/* */
"Pump Settings" = "Налаштування Помпи";

/* Insulin unit per hour */
"U/hr" = "Од/год";

/* Unit in number of units delivered (keep the space character!) */
" U" = "Од";

/* /Insulin unit */
"/U" = "/Од";

/* Insulin unit */
"U" = "U";

/* Unit per hour with space */
" U/hr" = " Од/год";

/* Number of units per hour*/
"%@ U/hr" = " %@ Од/год";

/* Number of units insulin delivered */
"%@ U" = "%@ Од";

/*Carb ratio unit */
"g/U" = "гр/Од";

/* grams */
" g" = "гр";

/* The short unit display string for grams */
"g" = "g";

/* when 0 U/hr */
"0 U/hr" = "0 Од/Год";

/* abbreviation for days */
"d" = "d";

/* abbreviation for hours */
"h" = "г";

/* abbreviation for minutes */
"m" = "хв.";

/*  */
"Closed loop" = "Замкнена петля";

/* */
"Configuration" = "Налаштування";

/* */
"Devices" = "Пристрої";

/*  */
"Pump" = "Помпа";

/*  */
"Services" = "Сервіси";

/*  */
"Settings" = "Налаштування";

/* 2 log files to share */
"Share logs" = "Поділитися логом";

/* Upper target */
"High target" = "Висока ціль";

/* Lower target */
"Low target" = "Низька ціль";

/*  */
"Target Ranges" = "Цільові Діапазони";

/* When bolusing */
"Bolusing" = "Подаю болюс";

/* */
"Pump suspended" = "Помпу призупинено";

/* */
"Middleware" = "Проміжний код";

/* Header */
"History" = "Історія";

/* CGM option */
"Upload glucose to Nightscout" = "Вивантажити глюкозу у Nightscout";

/* Type of CGM or glucose source */
"Type" = "Тип";

/* CGM */
"CGM" = "CGM";

/* CGM Transmitter ID */
"Transmitter ID" = "ID передавача";

/* Other CGM setting */
"Other" = "Інше";

/* Whatch app alert */
"Set temp targets presets on iPhone first" = "Set temp targets presets on iPhone first";

/* Updating Watch app */
"Updating..." = "Updating...";

/* Header for Temp targets in Watch app */
"Temp Targets" = "Temp Targets";


/* Calendar and Libre transmitter settings --------------*/
/* */

"Configure Libre Transmitter" = "Налаштувати Libre Transmitter";

/* */
"Calibrations" = "Калібрування";

/* */
"Create events in calendar" = "Створити подію в календарі";

/* */
"Calendar" = "Календар";

/* */
"Other" = "Інше";

/* */
"Libre Transmitter" = "Libre трансміттер";

/* */
"Libre Transmitters" = "Libre трансміттери";

/* */
"Bluetooth Transmitters" = "Bluetooth передавачі";

/* */
"Modes" = "Режими";

/* Libre 2 Direct */
"Libre 2 Direct" = "Libre 2 Direct";

/* */
"Select the third party transmitter you want to connect to" = "Виберіть сторонній передавач для підключення";

/* State was restored */
"State was restored" = "Стан було відновлено";

/* The short unit display string for millimoles of glucose per liter */
"mmol/L" = "ммол/л";

/* The short unit display string for milligrams of glucose per decilter */
"mg/dL" = "мг/дл";

/* */
"Add calibration" = "Додати калібрування";

/* When adding capillary glucose meater reading */
"Meter glucose" = "Вимірювач глюкози";

/* */
"Info" = "Інформація";

/*v*/
"Slope" = "Нахил";

/* */
"Intercept" = "Перетин";

/* */
"Chart" = "Графік";

/* */
"Remove" = "Вилучити";

/* */
"Remove Last" = "Видалити останнє";

/* */
"Remove All" = "Вилучити все";

/* */
"Calibrations" = "Калібрування";

/* */
"About the Process" = "Про процес";

/* */
"Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working." = "Будь ласка, переконайтеся, що ваш датчик Libre 2 вже активований і закінчився розігрів. Якщо у вас є інші програми, які підключаються до датчика через bluetooth, їх потрібно вимкнути або видалити. \n\n Ви можете мати лише один додаток, який зв’язується з датчиком через Bluetooth. Потім натисніть кнопку «сполучення та підключення» нижче, щоб почати процес. Зверніть увагу, що з’єднання Bluetooth може зайняти до кількох хвилин, перш ніж воно почне працювати.";

/* */
"Pairinginfo" = "Інформація про створення пари";

/* */
"PatchInfo" = "Інформація про патч";

/* */
"Calibrationinfo" = "Інформація калібрування";

/* */
"Unknown" = "Невідомий";

/* */
"Not paired yet" = "Ще не в парі";

/* */
"Pair Sensor & connect" = "З'єднайте датчик і підключіть";

/* */
"Phone NFC required!" = "Потрібно телефон з NFC!";

/* */
"Your phone or app is not enabled for NFC communications, which is needed to pair to libre2 sensors" = "Телефон або додаток не ввімкнуто для NFC з'єднання, це потрібно для підключення Libre2";

/* Bluetooth Power Off */
"Bluetooth Power Off" = "Bluetooth вимкнений";

/* Please turn on Bluetooth */
"Please turn on Bluetooth" = "Будь ласка, увімкніть Bluetooth";

/* No Libre Transmitter Selected */
"No Libre Transmitter Selected" = "Не обрано Libre Transmitter";

/* Delete Transmitter and start anew. */
"Delete CGMManager and start anew. Your libreoopweb credentials will be preserved" = "Видаліть CGMManager і почніть заново. Ваші дані libreoopweb будуть збережені";

/* Invalid libre checksum */
"Invalid libre checksum" = "Некоректна контрольна сума";

/* Libre sensor was incorrectly read, CRCs were not valid */
"Libre sensor was incorrectly read, CRCs were not valid" = "Датчик Libre неправильно прочитано, CRC не правильні";

/* Glucose */
"Glucose" = "Глюкоза";

/* LOWALERT! */
"LOWALERT!" = "УВАГА НИЗЬКИЙ!";

/* HIGHALERT! */
"HIGHALERT!" = "УВАГА ВИСОКИЙ!";

/* (Snoozed)*/
"(Snoozed)" = "Відкладено";

/* Glucose: %@ */
"Glucose: %@" = "Глюкоза: %@";

/* Transmitter: %@%% */
"Transmitter: %@%%" = "Передавач: %@";

/* No Sensor Detected */
"No Sensor Detected" = "Не виявлено датчиків";

/* This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor */
"This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor" = "Це може бути періодична проблема, але, будь ласка, перевірте, чи ваш трансмітер міцно закріплений над вашим датчиком";

/* New Sensor Detected */
"New Sensor Detected" = "Виявлено новий датчик";

/* Please wait up to 30 minutes before glucose readings are available! */
"Please wait up to 30 minutes before glucose readings are available!" = "Будь ласка, зачекайте до 30 хвилин, перш ніж буде доступно читання з глюкозою!";

/* Invalid Glucose sample detected, try again later */
"Invalid Glucose sample detected, try again later" = "Виявлено невірний показник рівня глюкози, повторіть спробу пізніше";

/* ensor might have temporarily stopped, fallen off or is too cold or too warm */
"Sensor might have temporarily stopped, fallen off or is too cold or too warm" = "Датчики можуть бути тимчасово зупинені, падіння або занадто холодно або тепло.";

/* Invalid Sensor Detected */
"Invalid Sensor Detected" = "Помилка визначення сенсора";

/* Detected sensor seems not to be a libre 1 sensor! */
"Detected sensor seems not to be a libre 1 sensor!" = "Виявлений датчик не є датчиком Libre1!";

/* Detected sensor is invalid: %@ */
"Detected sensor is invalid: %@" = "Виявлений датчик недійсний: %@";

/* Low Battery */
"Low battery" = "Низький заряд батареї";

/* */
"Invalid sensor" = "Invalid sensor";

/* */
"Sensor change" = "Sensor change";

/* */
"Sensor expires soon" = "Sensor expires soon";

/* Battery is running low %@, consider charging your %@ device as soon as possible */
"Battery is running low %@, consider charging your %@ device as soon as possible" = "Рівень заряду батареї низький %@, зарядіть ваш %@ пристрій найшвидше";

/* Extracting calibrationdata from sensor */
"Extracting calibrationdata from sensor" = "Вилучення калібрування даних від датчика";

/* Sensor Ending Soon */
"Sensor Ending Soon" = "Sensor Ending Soon";

/* Current Sensor is Ending soon! Sensor Life left in %@ */
"Current Sensor is Ending soon! Sensor Life left in %@" = "Current Sensor is Ending soon! Sensor Life left in %@";

/* */
"Libre Bluetooth" = "Libre Bluetooth";

/* */
"Snooze Alerts" = "Snooze Alerts";

/* */
"Last measurement" = "Last measurement";

/* */
"Sensor Footer checksum" = "Sensor Footer checksum";

/* */
"Last Blood Sugar prediction" = "Last Blood Sugar prediction";

/* */
"CurrentBG" = "CurrentBG";

/* */
"Sensor Info" = "Sensor Info";

/* */
"Sensor Age" = "Sensor Age";

/* */
"Sensor Age Left" = "Sensor Age Left";

/* */
"Sensor Endtime" = "Sensor Endtime";

/* */
"Sensor State" = "Sensor State";

/* */
"Sensor Serial" = "Sensor Serial";

/* */
"Transmitter Info" = "Transmitter Info";

/* */
"Hardware" = "Hardware";

/* */
"Firmware" = "Firmware";

/* */
"Connection State" = "Connection State";

/* */
"Transmitter Type" = "Transmitter Type";

/* */
"Sensor Type" = "Sensor Type";

/* */
"Factory Calibration Parameters" = "Factory Calibration Parameters";

/* */
"Valid for footer" = "Valid for footer";

/* */
"Edit calibrations" = "Edit calibrations";

/* */
"edit calibration clicked" = "edit calibration clicked";

/* */
"Delete CGM" = "Delete CGM";
/* */
"Are you sure you want to remove this cgm from loop?" = "Are you sure you want to remove this cgm from loop?";

/* */
"There is no undo" = "There is no undo";

/* */
"Advanced" = "Advanced";

/* */
"Alarms" = "Alarms";

/* */
"Glucose Settings" = "Glucose Settings";

/* */
"Notifications" = "Notifications";

/* */
"Export logs" = "Export logs";

/* */
"Export not available" = "Export not available";

/* */
"Log export requires ios 15" = "Log export requires ios 15";

/* */
"Got it!" = "Got it!";

/* */
"Saved to %@" = "Saved to %@";

/* */
"No logs available" = "No logs available";

/* */
"Glucose Notification visibility" = "Glucose Notification visibility";

/* */
"Always Notify Glucose" = "Always Notify Glucose";

/* */
"Notify per reading" = "Notify per reading";

/* */
"Value" = "Value";

/* */
"Adds Phone Battery" = "Adds Phone Battery";

/* */
"Adds Transmitter Battery" = "Adds Transmitter Battery";

/* */
"Also vibrate" = "Also vibrate";

/* */
"Additional notification types" = "Additional notification types";

/* */
"Misc" = "Misc";

/* */
"Unit override" = "Unit override";

/* */
"Low" = "Low";

/* */
"High" = "High";

/* */
"glucose" = "glucose";

/* */
"Schedule " = "Schedule ";

/* */
"tapped save schedules" = "tapped save schedules";

/* */
"Error" = "Error";

/* */
"Some ui element was incorrectly specified" = "Some ui element was incorrectly specified";

/* */
"Success" = "Success";

/* */
"Schedules were saved successfully!" = "Schedules were saved successfully!";

/* */
"High Glucose Alarm active" = "High Glucose Alarm active";

/* */
"Low Glucose Alarm active" = "Low Glucose Alarm active";

/* */
"No Glucose Alarm active" = "No Glucose Alarm active";

/* */
"snoozing until %@" = "snoozing until %@";

/* */
"not snoozing" = "not snoozing";

/* */
"nothing to see here" = "nothing to see here";

/* */
"snooze from testview clicked" = "snooze from testview clicked";

/* */
"will snooze for %@ until %@" = "will snooze for %@ until %@";

/* */
"Click to Snooze Alerts" = "Click to Snooze Alerts";

/* */
"Strength" = "Strength";

/* */
"Hold the top of your iPhone near the sensor to pair" = "Hold the top of your iPhone near the sensor to pair";

/* */
"Sensor not found" = "Sensor not found";

/* */
"Also play alert sound" = "Also play alert sound";

/* */
"Notification Settings" = "Notification Settings";

/* */
"Found devices: %d" = "Found devices: %d";

/* */
"Backfill options" = "Backfill options";

/* */
"Backfilling from trend is currently not well supported by Loop" = "Backfilling from trend is currently not well supported by Loop";

/* */
"Backfill from history" = "Backfill from history";

/* */
"Backfill from trend" = "Backfill from trend";

/* */
"Debug options" = "Debug options";

/* */
"Adds a lot of data to the Issue Report " = "Adds a lot of data to the Issue Report ";

/* */
"Persist sensordata" = "Persist sensordata";

/* */
"Battery" = "Battery";

/* */
"Also add source info" = "Also add source info";

/* */
"Carbs Required Threshold" = "Carbs Required Threshold";

/* */
"Carbs required: %d g" = "Carbs required: %d g";

/* */
"To prevent LOW required %d g of carbs" = "To prevent LOW required %d g of carbs";

/* */
"FreeAPS X not active" = "FreeAPS X not active";

/* */
"Last loop was more then %d min ago" = "Last loop was more then %d min ago";

/* Glucose badge */
"Show glucose on the app badge" = "Show glucose on the app badge";


/* Headers for settings ------------------- */


"OpenAPS main settings" = "OpenAPS main settings";

"OpenAPS SMB settings" = "OpenAPS SMB settings";

"OpenAPS targets settings" = "OpenAPS targets settings";

"OpenAPS other settings" = "OpenAPS other settings";


/* Glucose Simulator CGM */
"Glucose Simulator" = "Glucose Simulator";

/* Restored state message */
"Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@" = "Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@";


/*
  Infotexts from openaps.docs and androidaps.docs
  FreeAPS X
*/
/* ”Rewind Resets Autosens” */

"This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature." = "This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature.";

/* ”High Temptarget Raises Sensitivity" */
"Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160)." = "Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160).";

/* ”Low Temptarget Lowers Sensitivity" */
"Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160)." = "Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160).";

/* ”Sensitivity Raises Target" */
"When true, raises BG target when autosens detects sensitivity" = "When true, raises BG target when autosens detects sensitivity";

/* ”Resistance Lowers Target" */
"Defaults to false. When true, will lower BG target when autosens detects resistance" = "Defaults to false. When true, will lower BG target when autosens detects resistance";

/* ”Advanced Target Adjustments" */
"This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone." = "This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone.";

/* "Exercise Mode" */
"Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity" = "Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity";

/* "Wide BG Target Range" */
"Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs." = "Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs.";

/* "Skip Neutral Temps" */
"Defaults to false, so that FreeAPS X will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means FreeAPS X will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications from the 'rig', that may wake you up during the night." = "Defaults to false, so that FreeAPS X will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means OpenAPS will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications form the 'rig', that may wake you up during the night. ";

/* "Unsuspend If No Temp” */
"Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended." = "Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended.";

/* "Enable UAM" */
"With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell FreeAPS X about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier." = "With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell FreeAPS X about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier.";

/* Enable SMB With COB" */

"This enables supermicrobolus (SMB) while carbs on board (COB) are positive." = "This enables supermicrobolus (SMB) while carbs on board (COB) are positive.";

/* "Enable SMB With Temptarget” */
"This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB." = "This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB.";

/* "Enable SMB Always" */
"Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget)." = "Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget).";

/* "Enable SMB After Carbs" */
"Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB)." = "Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB).";

/* "Allow SMB With High Temptarget" */
"Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets." = "Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets.";

/* "Use Custom Peak Time” */
"Defaults to false. Setting to true allows changing insulinPeakTime" = "Defaults to false. Setting to true allows changing insulinPeakTime";

/* "Suspend Zeros IOB” */
"Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added." = "Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added.";

/* "Max IOB" */
"Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop)." = "Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop).";

/* "Max Daily Safety Multiplier" */
"This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune.";

/* "Current Basal Safety Multiplier" */
"This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune.";

/* "Autosens Max" */
"This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target." = "This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target.";

/* "Autosens Min" */
"The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets." = "The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets.";

/* "Half Basal Exercise Target" */
"Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes." = "Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes.";

/* "Max COB" */
"This defaults maxCOB to 120 because that’s the most a typical body can absorb over 4 hours. (If someone enters more carbs or stacks more; OpenAPS will just truncate dosing based on 120. Essentially, this just limits AMA as a safety cap against weird COB calculations due to fluky data.)" = "This defaults maxCOB to 120 because that’s the most a typical body can absorb over 4 hours. (If someone enters more carbs or stacks more; OpenAPS will just truncate dosing based on 120. Essentially, this just limits AMA as a safety cap against weird COB calculations due to fluky data.)";

/* "Bolus Snooze DIA Divisor" */
"Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2)." = "Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2).";

/* "Min 5m Carbimpact" */
"This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g." = "This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g.";

/* "Autotune ISF Adjustment Fraction" */
"The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF." = "The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF.";

/* "Remaining Carbs Fraction" */
"This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption.";

/* "Remaining Carbs Cap" */
"This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption.";

/* ”Max SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs.";

/* "Max UAM SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs.";

/* "SMB Interval" */
"Minimum duration in minutes between two enacted SMBs" = "Minimum duration in minutes between two enacted SMBs";

/* "Bolus Increment" */
"Smallest possible bolus amount" = "Smallest possible bolus amount";

/* "Insulin Peak Time" */
"Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-papid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops." = "Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-papid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops.";

/* "Carbs Req Threshold" */
"Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold." = "Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold.";

/* "Noisy CGM Target Multiplier" */
"Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data" = "Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data";