Localizable.strings 2.3 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455
  1. /* PeripheralManagerError.emptyValue error description */
  2. "Characteristic value was empty" = "Karakteristieke waarde was leeg";
  3. /* Write size limit exceeded error description (1: size limit) */
  4. "Data exceeded maximum size of %@ bytes" = "Gegevens overschrijden maximale grootte van %@ bytes";
  5. /* Invalid input error description (1: input) */
  6. "Input %@ is invalid" = "Invoer %@ is ongeldig";
  7. /* Recovery suggestion for unknown peripheral characteristic */
  8. "Make sure the device is nearby, and the issue should resolve automatically" = "Zorg ervoor dat het apparaat in de buurt is, wat het probleem automatisch zou moeten oplossen.";
  9. /* Timeout error description */
  10. "Peripheral did not respond in time" = "Apparaat reageerde niet op tijd";
  11. /* Not ready error description */
  12. "Peripheral isnʼt connected" = "Apparaat is niet verbonden";
  13. /* Response timeout error description */
  14. "Pump did not respond in time" = "Pomp reageerde niet op tijd";
  15. /* Invalid response error description (1: response) */
  16. "Response %@ is invalid" = "Reactie %@ is ongeldig";
  17. /* commandsBlocked error description */
  18. "RileyLink command did not respond" = "Er was geen reactie van het RileyLink commando";
  19. /* PeripheralManagerError.timeout error description */
  20. "RileyLink did not respond in time" = "RileyLink reageerde niet op tijd";
  21. /* Unsupported command error description */
  22. "RileyLink firmware does not support the %@ command" = "De RileyLink firmware ondersteunt het %@ commando niet";
  23. /* PeripheralManagerError.busy error description */
  24. "RileyLink is busy" = "RileyLink is bezig";
  25. /* PeripheralManagerError.notReady error description */
  26. "RileyLink is not connected" = "RileyLink is niet verbonden";
  27. /* commandsBlocked recovery suggestion */
  28. "RileyLink may need to be turned off and back on" = "RileyLink moet mogelijk uit- en weer ingeschakeld worden";
  29. /* Failure reason: unknown peripheral characteristic */
  30. "The RileyLink was temporarily disconnected" = "The RileyLink was tijdelijk niet verbonden";
  31. /* Error description */
  32. "Unknown characteristic" = "Onbekende eigenschap";
  33. /* PeripheralManagerError.unknownCharacteristic error description */
  34. "Unknown characteristic: %@" = "Onbekende eigenschap: %@";
  35. /* PeripheralManagerError.unknownCharacteristic error description */
  36. "Unknown service: %@" = "Onbekende service: %@";