Trio/FreeAPS/Sources/Localizations/Main/es.lproj/Localizable.strings

/*
  Localizable.strings
  FreeAPS X
*/
/* -------------------------------- */
/* Bolus screen when adding insulin */
"Add insulin without actually bolusing" = "Añadir insulinar sin administrar bolo";

/* Add insulin from source outside of pump */
"Add %@ without bolusing" = "Añada %@ sin bolo";

"Bolus" = "Bolo";

"Close" = "Cerrar";

/* Continue after added carbs without bolus */
"Continue without bolus" = "Continuar sin administrar bolo";

/* Header */
"Enact Bolus" = "Administrar Bolo";

/* Button */
"Enact bolus" = "Administrar Bolo";

/*  */
"Insulin recommended" = "Insulina recomendada";

/*  */
"Insulin required" = "Insulina requerida";

/* Bolus screen */
"Recommendation" = "Recomendación";

/* Button */
"Clear" = "Limpiar";

/* Button */
"Done" = "Hecho";

/*  */
"Wait please" = "Espere por favor";

/*  */
"Agree and continue" = "Aceptar y continuar";

/* Headline in enacted pop up (at: at what time) */
"Enacted at" = "Enacted at";

/* Headline in suggested pop up (at: at what time) */
"Suggested at" = "Suggested at";

/* Headline in enacted pop up (at: at what time) */
"Error at" = "Error at";

/* Home title */
"Home" = "Inicio";

/* Looping in progress */
"looping" = "En bucle";

/* min ago since last loop */
"min ago" = "min";

/* Status Title */
"No suggestion" = "No hay sugerencias";

/* Replace pod text in Header */
"Replace pod" = "Reemplazar Pod";

/* Add carbs screen */
"Add Carbs" = "Añadir Carbohidratos";

/* Add carbs header and button in Watch app. You can skip the last " " space. It's just for differentiation */
"Add Carbs " = "Agregar Carbohidratos ";

/*  */
"Amount Carbs" = "Cantidad de Carbohidratos";

/* Grams unit */
"grams" = "gramos";

/*  */
"Carbs required" = "Se requieren carbohidratos";

/* */
"Are you sure?" = "¿Estás seguro?";

/* Bottom target temp */
"Bottom target" = "Objetivo Inferior";

/* Cancel preset name */
"Cancel" = "Cancelar";

/*  */
"Cancel Temp Target" = "Cancelar objetivo temporal";

/* Custom temp target */
"Custom" = "Personalizado";

/*  */
"Date" = "Fecha";

/*  */
"Delete" = "Borrar";

/* Delete preset temp target */
"Delete preset \"%@\"" = "Eliminar ajuste predefinido \"%@\"";

/* Duration of target temp or temp basal */
"Duration" = "Duración";

/*  */
"Enact Temp Target" = "Iniciar objetivo temporal";

/*  */
"Enter preset name" = "Introduzca nombre del predef";

/* Preset name */
"Name" = "Nombre";

/* minutes of target temp */
"minutes" = "minutos";

/*  */
"Presets" = "Ajustes por defecto";

/* Save preset name */
"Save" = "Guardar";

/*  */
"Save as preset" = "Guardar como preestablecido";

/* Upper temp target limit */
"Top target" = "Objetivo Superior";

/*  Temp target set for ... minutes */
"for" = "for";

/*  Temp target set for ... minutes */
"min" = "min";

/*  */
"Autotune" = "Autotune";

/*  */
"Basal profile" = "Perfil Basal";

/*  */
"Carb ratio" = "Ratio de carbohidratos";

/*  */
"Delete autotune data" = "Eliminar datos autotune";

/*  */
"Run now" = "Ejecutar Ahora";

/*  */
"Last run" = "Última ejecución";

/*  */
"Sensitivity" = "Sensibilidad";

/*  */
"Use Autotune" = "Usar Autotune";

/* Add profile basal */
"Add" = "Añadir";

/*  */
"Basal Profile" = "Perfil Basal";

/* Rate basal profile */
"Rate" = "Ratio";

/*  */
"Save on Pump" = "Guardar en Bomba";

/*  */
"Saving..." = "Guardando...";

/*  */
"Schedule" = "Programación";

/*  */
"starts at" = "comienza a las";

/* Time basal profile */
"Time" = "Tiempo";

/* */
"Calculated Ratio" = "Ratio Calculado";

/* Carb Ratios header */
"Carb Ratios" = "Ratios de Carbohidratos";

/*  */
"Ratio" = "Ratio";

/*  */
"Autosens" = "Autosens";

/*  */
"Calculated Sensitivity" = "Sensibilidad Calculada";

/*  */
"Insulin Sensitivities" = "Sensibilidades a la insulina";

/* */
"Sensitivity Ratio" = "Ratio de sensibilidad";

/*  */
"Dismiss" = "Descartar";

/*  */
"Important message" = "Mensaje importante";

/*  */
"Amount" = "Cantidad";

/* */
"Cancel Temp Basal" = "Cancelar basal temporal";

/* Enact
Enact a temp Basal or a temp target */
"Enact" = "Ejecutar";

/* */
"Manual Temp Basal" = "Basal temporal manual";

/* Allow uploads tp NS */
"Allow uploads" = "Permitir subida de datos";

/* API secret in NS */
"API secret" = "API Secret";

/* Connect to NS */
"Connect" = "Conectar";

/* Connected to NS */
"Connected!" = "Conectado!";

/* Connecting to NS */
"Connecting..." = "Conectando...";

/*  */
"Invalid URL" = "URL inválida";

/*  */
"Local glucose source" = "Fuente local de glucosa";

/* Header */
"Nightscout Config" = "Configuración de Nightscout";

/*  */
"Port" = "Puerto";

/*  */
"URL" = "URL";

/**/
"Use local glucose server" = "Usar servidor local de glucosa";

/*  */
"Edit settings json" = "Editar configuración json";

/* */
"Glucose units" = "Unidades de glucosa";

/*  */
"Preferences" = "Preferencias";

/* Recommended Insulin Fraction in preferences */
"Recommended Insulin Fraction" = "Fracción de insulina recomendada";

/* Do you want to show bolus screen after added carbs? */
"Skip Bolus screen after carbs" = "Saltar pantalla de bolo después de carbohidratos";

/* Allow remote control from NS */
"Remote control" = "Control a distancia";

/* Add Medtronic pump */
"Add Medtronic" = "Añadir Medtronic";

/* Add Omnipod pump */
"Add Omnipod" = "Añadir Omnipod";

/* Add Simulator pump */
"Add Simulator" = "Añadir simulador";

/* Insulin model */
"Model" = "Modelo";

/*  */
"Pump config" = "Configuración de la bomba";

/*  */
"Delivery limits" = "Límites de Dosificación";

/*  */
"Duration of Insulin Action" = "Duración de la insulina activa";

/* hours of duration of insulin activity */
"hours" = "horas";

/* Max setting */
"Max Basal" = "Basal máxima";

/* Max setting */
"Max Bolus" = "Bolo máximo";

/* */
"Pump Settings" = "Configuración de la bomba";

/* Insulin unit per hour */
"U/hr" = "U/h";

/* Unit in number of units delivered (keep the space character!) */
" U" = " U";

/* /Insulin unit */
"/U" = "/U";

/* Insulin unit */
"U" = "U";

/* Unit per hour with space */
" U/hr" = " U/hora";

/* Number of units per hour*/
"%@ U/hr" = "%@ U/hora";

/* Number of units insulin delivered */
"%@ U" = "%@ U";

/*Carb ratio unit */
"g/U" = "g/U";

/* grams */
" g" = " g";

/* The short unit display string for grams */
"g" = "g";

/* when 0 U/hr */
"0 U/hr" = "0 U/hora";

/* abbreviation for days */
"d" = "d";

/* abbreviation for hours */
"h" = "h";

/* abbreviation for minutes */
"m" = "mn";

/*  */
"Closed loop" = "Lazo cerrado";

/* */
"Configuration" = "Configuracion";

/* */
"Devices" = "Dispositivos";

/*  */
"Pump" = "Bomba";

/*  */
"Services" = "Servicios";

/*  */
"Settings" = "Ajustes";

/* 2 log files to share */
"Share logs" = "Compartir registros";

/* Upper target */
"High target" = "Objetivo Alto";

/* Lower target */
"Low target" = "Objectivo Bajo";

/*  */
"Target Ranges" = "Rango Objetivo";

/* When bolusing */
"Bolusing" = "Administrando Bolo";

/* */
"Pump suspended" = "Bomba suspendida";

/* */
"Middleware" = "Middleware";

/* Header */
"History" = "Historial";

/* CGM option */
"Upload glucose to Nightscout" = "Cargar glucosa a Nightscout";

/* Type of CGM or glucose source */
"Type" = "Tipo";

/* CGM */
"CGM" = "MCG";

/* CGM Transmitter ID */
"Transmitter ID" = "ID del transmisor";

/* Other CGM setting */
"Other" = "Otro";

/* Whatch app alert */
"Set temp targets presets on iPhone first" = "Set temp targets presets on iPhone first";

/* Updating Watch app */
"Updating..." = "Updating...";

/* Header for Temp targets in Watch app */
"Temp Targets" = "Temp Targets";

/* Delete carbs from data table and Nightscout */
"Delete carbs?" = "¿Eliminar carbohidratos?";

/* Delete insulin from pump history and Nightscout */
"Delete insulin?" = "Delete insulin?";

/* Treatments list */
"Treatments" = "Tratamientos";

/* " min" in Treatments list */
" min" = " min";

/* */
"Unable to change anything" = "Unable to change anything";


/* Calendar and Libre transmitter settings ---------------
 */
/* */
"Configure Libre Transmitter" = "Configurar Transmisor Libre";

/* */
"Calibrations" = "Calibraciones";

/* */
"Create events in calendar" = "Crear eventos en el calendario";

/* */
"Calendar" = "Calendario";

/* */
"Other" = "Otro";

/* */
"Libre Transmitter" = "Libre Transmitter";

/* */
"Libre Transmitters" = "Libre Transmitters";

/* */
"Bluetooth Transmitters" = "Transmisores Bluetooth";

/* */
"Modes" = "Modos";

/* Libre 2 Direct */
"Libre 2 Direct" = "Libre 2 Directo";

/* */
"Select the third party transmitter you want to connect to" = "Seleccione el transmisor de terceros al que desea conectarse";

/* State was restored */
"State was restored" = "State was restored";

/* The short unit display string for millimoles of glucose per liter */
"mmol/L" = "mmol/L";

/* The short unit display string for milligrams of glucose per decilter */
"mg/dL" = "mg/dL";

/* */
"Add calibration" = "Añadir calibración";

/* When adding capillary glucose meater reading */
"Meter glucose" = "Meter glucose";

/* */
"Info" = "Info";

/*v*/
"Slope" = "Slope";

/* */
"Intercept" = "Intercept";

/* */
"Chart" = "Gráfica";

/* */
"Remove" = "Eliminar";

/* */
"Remove Last" = "Eliminar último";

/* */
"Remove All" = "Eliminar todos";

/* */
"About the Process" = "About the Process";

/* */
"Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working." = "Please make sure that your Libre 2 sensor is already activated and finished warming up. If you have other apps connecting to the sensor via bluetooth, these need to be shut down or uninstalled. \n\n You can only have one app communicating with the sensor via bluetooth. Then press the \"pariring and connection\" button below to start the process. Please note that the bluetooth connection might take up to a couple of minutes before it starts working.";

/* */
"Pairinginfo" = "Pairinginfo";

/* */
"PatchInfo" = "PatchInfo";

/* */
"Calibrationinfo" = "Calibrationinfo";

/* */
"Unknown" = "Desconocido";

/* */
"Not paired yet" = "No emparejado aún";

/* */
"Pair Sensor & connect" = "Pair Sensor & connect";

/* */
"Phone NFC required!" = "Phone NFC required!";

/* */
"Your phone or app is not enabled for NFC communications, which is needed to pair to libre2 sensors" = "Your phone or app is not enabled for NFC communications, which is needed to pair to libre2 sensors";

/* Bluetooth Power Off */
"Bluetooth Power Off" = "Bluetooth Power Off";

/* Please turn on Bluetooth */
"Please turn on Bluetooth" = "Please turn on Bluetooth";

/* No Libre Transmitter Selected */
"No Libre Transmitter Selected" = "No Libre Transmitter Selected";

/* Delete Transmitter and start anew. */
"Delete CGMManager and start anew. Your libreoopweb credentials will be preserved" = "Delete CGMManager and start anew. Your libreoopweb credentials will be preserved";

/* Invalid libre checksum */
"Invalid libre checksum" = "Invalid libre checksum";

/* Libre sensor was incorrectly read, CRCs were not valid */
"Libre sensor was incorrectly read, CRCs were not valid" = "Libre sensor was incorrectly read, CRCs were not valid";

/* Glucose */
"Glucose" = "Glucose";

/* LOWALERT! */
"LOWALERT!" = "LOWALERT!";

/* HIGHALERT! */
"HIGHALERT!" = "HIGHALERT!";

/* (Snoozed)*/
"(Snoozed)" = "(Snoozed)";

/* Glucose: %@ */
"Glucose: %@" = "Glucose: %@";

/* Transmitter: %@%% */
"Transmitter: %@%%" = "Transmitter: %@%%";

/* No Sensor Detected */
"No Sensor Detected" = "No Sensor Detected";

/* This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor */
"This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor" = "This might be an intermittent problem, but please check that your transmitter is tightly secured over your sensor";

/* New Sensor Detected */
"New Sensor Detected" = "New Sensor Detected";

/* Please wait up to 30 minutes before glucose readings are available! */
"Please wait up to 30 minutes before glucose readings are available!" = "Please wait up to 30 minutes before glucose readings are available!";

/* Invalid Glucose sample detected, try again later */
"Invalid Glucose sample detected, try again later" = "Invalid Glucose sample detected, try again later";

/* ensor might have temporarily stopped, fallen off or is too cold or too warm */
"Sensor might have temporarily stopped, fallen off or is too cold or too warm" = "Sensor might have temporarily stopped, fallen off or is too cold or too warm";

/* Invalid Sensor Detected */
"Invalid Sensor Detected" = "Invalid Sensor Detected";

/* Detected sensor seems not to be a libre 1 sensor! */
"Detected sensor seems not to be a libre 1 sensor!" = "Detected sensor seems not to be a libre 1 sensor!";

/* Detected sensor is invalid: %@ */
"Detected sensor is invalid: %@" = "Detected sensor is invalid: %@";

/* Low Battery */
"Low battery" = "Low battery";

/* */
"Invalid sensor" = "Invalid sensor";

/* */
"Sensor change" = "Sensor change";

/* */
"Sensor expires soon" = "Sensor expires soon";

/* Battery is running low %@, consider charging your %@ device as soon as possible */
"Battery is running low %@, consider charging your %@ device as soon as possible" = "Battery is running low %@, consider charging your %@ device as soon as possible";

/* Extracting calibrationdata from sensor */
"Extracting calibrationdata from sensor" = "Extracting calibrationdata from sensor";

/* Sensor Ending Soon */
"Sensor Ending Soon" = "Sensor Ending Soon";

/* Current Sensor is Ending soon! Sensor Life left in %@ */
"Current Sensor is Ending soon! Sensor Life left in %@" = "Current Sensor is Ending soon! Sensor Life left in %@";

/* */
"Libre Bluetooth" = "Bluetooth Libre";

/* */
"Snooze Alerts" = "Snooze Alerts";

/* */
"Last measurement" = "Última medición";

/* */
"Sensor Footer checksum" = "Sensor Footer checksum";

/* */
"Last Blood Sugar prediction" = "Last Blood Sugar prediction";

/* */
"CurrentBG" = "CurrentBG";

/* */
"Sensor Info" = "Sensor Info";

/* */
"Sensor Age" = "Sensor Age";

/* */
"Sensor Age Left" = "Sensor Age Left";

/* */
"Sensor Endtime" = "Sensor Endtime";

/* */
"Sensor State" = "Sensor State";

/* */
"Sensor Serial" = "Sensor Serial";

/* */
"Transmitter Info" = "Transmitter Info";

/* */
"Hardware" = "Hardware";

/* */
"Firmware" = "Firmware";

/* */
"Connection State" = "Estado de Conexión";

/* */
"Transmitter Type" = "Transmitter Type";

/* */
"Sensor Type" = "Sensor Type";

/* */
"Factory Calibration Parameters" = "Factory Calibration Parameters";

/* */
"Valid for footer" = "Valid for footer";

/* */
"Edit calibrations" = "Edit calibrations";

/* */
"edit calibration clicked" = "edit calibration clicked";

/* */
"Delete CGM" = "Delete CGM";

/* */
"Are you sure you want to remove this cgm from loop?" = "Are you sure you want to remove this cgm from loop?";

/* */
"There is no undo" = "There is no undo";

/* */
"Advanced" = "Advanced";

/* */
"Alarms" = "Alarmas";

/* */
"Glucose Settings" = "Glucose Settings";

/* */
"Notifications" = "Notifications";

/* */
"Export logs" = "Export logs";

/* */
"Export not available" = "Export not available";

/* */
"Log export requires ios 15" = "Log export requires ios 15";

/* */
"Got it!" = "Got it!";

/* */
"Saved to %@" = "Saved to %@";

/* */
"No logs available" = "No logs available";

/* */
"Glucose Notification visibility" = "Glucose Notification visibility";

/* */
"Always Notify Glucose" = "Always Notify Glucose";

/* */
"Notify per reading" = "Notify per reading";

/* */
"Value" = "Value";

/* */
"Adds Phone Battery" = "Adds Phone Battery";

/* */
"Adds Transmitter Battery" = "Adds Transmitter Battery";

/* */
"Also vibrate" = "Also vibrate";

/* */
"Additional notification types" = "Additional notification types";

/* */
"Misc" = "Misc";

/* */
"Unit override" = "Unit override";

/* */
"Low" = "Low";

/* */
"High" = "High";

/* */
"glucose" = "glucose";

/* */
"Schedule " = "Schedule ";

/* */
"tapped save schedules" = "tapped save schedules";

/* */
"Error" = "Error";

/* */
"Some ui element was incorrectly specified" = "Some ui element was incorrectly specified";

/* */
"Success" = "Success";

/* */
"Schedules were saved successfully!" = "Schedules were saved successfully!";

/* */
"High Glucose Alarm active" = "High Glucose Alarm active";

/* */
"Low Glucose Alarm active" = "Low Glucose Alarm active";

/* */
"No Glucose Alarm active" = "No Glucose Alarm active";

/* */
"snoozing until %@" = "snoozing until %@";

/* */
"not snoozing" = "not snoozing";

/* */
"nothing to see here" = "nothing to see here";

/* */
"snooze from testview clicked" = "snooze from testview clicked";

/* */
"will snooze for %@ until %@" = "will snooze for %@ until %@";

/* */
"Click to Snooze Alerts" = "Click to Snooze Alerts";

/* */
"Strength" = "Strength";

/* */
"Hold the top of your iPhone near the sensor to pair" = "Hold the top of your iPhone near the sensor to pair";

/* */
"Sensor not found" = "Sensor not found";

/* */
"Also play alert sound" = "Also play alert sound";

/* */
"Notification Settings" = "Notification Settings";

/* */
"Found devices: %d" = "Found devices: %d";

/* */
"Backfill options" = "Backfill options";

/* */
"Backfilling from trend is currently not well supported by Loop" = "Backfilling from trend is currently not well supported by Loop";

/* */
"Backfill from history" = "Backfill from history";

/* */
"Backfill from trend" = "Backfill from trend";

/* */
"Debug options" = "Debug options";

/* */
"Adds a lot of data to the Issue Report " = "Adds a lot of data to the Issue Report ";

/* */
"Persist sensordata" = "Persist sensordata";

/* */
"Battery" = "Battery";

/* */
"Also add source info" = "Also add source info";

/* */
"Carbs Required Threshold" = "Carbs Required Threshold";

/* */
"Carbs required: %d g" = "Carbs required: %d g";

/* */
"To prevent LOW required %d g of carbs" = "To prevent LOW required %d g of carbs";

/* */
"FreeAPS X not active" = "FreeAPS X not active";

/* */
"Last loop was more then %d min ago" = "Last loop was more then %d min ago";

/* Glucose badge */
"Show glucose on the app badge" = "Show glucose on the app badge";

/* */
"Backfill glucose" = "Backfill glucose";

/* About this source */
"About this source" = "About this source";

/* */
"Bolus failed" = "Bolus failed";

/* */
"Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";

/* */
"Carbs" = "Carbs";

/* */
"Temp Basal" = "Temp Basal";

/* */
"Temp Target" = "Temp Target";

/* */
"Resume" = "Resume";

/* */
"Suspend" = "Suspend";

/* */
"Animated Background" = "Animated Background";

/* Sensor day(s) */
" day(s)" = " day(s)";

/* Option to show HR in Watch app*/
"Display HR on Watch" = "Display HR on Watch";


/* Headers for settings ----------------------- */
"OpenAPS main settings" = "OpenAPS main settings";

"OpenAPS SMB settings" = "OpenAPS SMB settings";

"OpenAPS targets settings" = "OpenAPS targets settings";

"OpenAPS other settings" = "OpenAPS other settings";

/* Glucose Simulator CGM */
"Glucose Simulator" = "Glucose Simulator";

/* Restored state message */
"Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@" = "Bluetooth State restored (APS restarted?). Found %d peripherals, and connected to %@ with identifier %@";

/* Shared app group xDrip4iOS */
"Using shared app group with external CGM app xDrip4iOS" = "Using shared app group with external CGM app xDrip4iOS";

/* Shared app group GlucoseDirect */
"Using shared app group with external CGM app GlucoseDirect" = "Using shared app group with external CGM app GlucoseDirect";

/* Dexcom G6 app */
"Dexcom G6 app" = "Dexcom G6 app";

/* Native G5 app */
"Native G5 app" = "Native G5 app";

/* Minilink transmitter */
"Minilink transmitter" = "Minilink transmitter";

/* Simple simulator */
"Simple simulator" = "Simple simulator";

/* Direct connection with Libre 1 transmitters or Libre 2 */
"Direct connection with Libre 1 transmitters or European Libre 2 sensors" = "Direct connection with Libre 1 transmitters or European Libre 2 sensors";

/* Online or internal server */
"Online or internal server" = "Online or internal server";

/* -------------- Developer settings ---------------------- */
/* Debug options */

"Developer" = "Developer";

/* Debug option view NS Upload Profile */
"NS Upload Profile" = "NS Upload Profile";

/* Debug option view NS Uploaded Profile */
"NS Uploaded Profile" = "NS Uploaded Profile";

/* Debug option view Autosense */
"Autosense" = "Autosense";

/* Debug option view Pump History */
"Pump History" = "Pump History";

/* Debug option view Target Ranges */
"Target ranges" = "Target ranges";

/* Debug option view Temp targets */
"Temp targets" = "Temp targets";

/* Debug option view Meal */
"Meal" = "Meal";

/* Debug option view Pump profile */
"Pump profile" = "Pump profile";

/* Debug option view Profile */
"Profile" = "Profile";

/* Debug option view Enacted */
"Enacted" = "Enacted";

/* Debug option view Announcements (from NS) */
"Announcements" = "Announcements";

/* Debug option view Enacted announcements announcements (from NS) */
"Enacted announcements" = "Enacted announcements";

/* Debug option view Autotune */
"Autotune" = "Autotune";

/* Debug option view Target presets */
"Target presets" = "Target presets";

/* Debug option view */
"Loop Cycles" = "Loop Cycles";

/* Debug option view Glucose Data used for statistics */
"Glucose Data used for statistics" = "Glucose Data used for statistics";

/* --------------- HealthKit intergration --------------------*/
/* */
"Apple Health" = "Apple Health";

/* */
"Connect to Apple Health" = "Connect to Apple Health";

/* Show when have not permissions for writing to Health */
"For write data to Apple Health you must give permissions in Settings > Health > Data Access" = "For write data to Apple Health you must give permissions in Settings > Health > Data Access";

/* */
"After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";

/* New ALerts ------------------------- */
/* Info title */
"Info" = "Info";

/* Warning title */
"Warning" = "Aviso";

/* Error title */
"Error" = "Error";

/* Manual temp basal mode */
"Manual" = "Manual";

/* Status highlight when manual temp basal is running. */
"Manual Basal" = "Manual Basal";

/* Current Manual Temp basal */
" -  Manual Basal ⚠️" = " -  Manual Basal ⚠️";

/* Total AT / Scheduled basal insulin */
" U/day" = " U/day";

/* Total AT / Scheduled basal insulin */
"Total" = "Total";

/* -------------------------------------------- FPU Strings ------------------------------------------------------*/
/* Enable FPU */

"Enable" = "Enable";

/* Header */
"Convert Fat and Protein" = "Convert Fat and Protein";

/* Header */
"Conversion settings" = "Conversion settings";

/* Delay */
"Delay In Minutes" = "Delay In Minutes";

/* Duration */
"Maximum Duration In Hours" = "Maximum Duration In Hours";

/* Interval */
"Interval In Minutes" = "Interval In Minutes";

/* Override */
"Override With A Factor Of " = "Override With A Factor Of ";

/* Description */
"Allows fat and protein to be converted into future carb equivalents using the Warsaw formula of kilocalories divided by 10.\n\nThis spreads the carb equivilants over a maximum duration setting that can be configured from 5-12 hours.\n\nDelay is time from now until the first future carb entry.\n\nInterval in minutes is how many minutes are between entries. The shorter the interval, the smoother the result. 10, 15, 20, 30, or 60 are reasonable choices.\n\nAdjustment factor is how much effect the fat and protein has on the entries. 1.0 is full effect (original Warsaw Method) and 0.5 is half effect. Note that you may find that your normal carb ratio needs to increase to a larger number if you begin adding fat and protein entries. For this reason, it is best to start with a factor of about 0.5 to ease into it.\n\nDefault settings: Time Cap: 8 h, Interval: 30 min, Factor: 0.5, Delay 60 min" = "Allows fat and protein to be converted into future carb equivalents using the Warsaw formula of kilocalories divided by 10.\n\nThis spreads the carb equivilants over a maximum duration setting that can be configured from 5-12 hours.\n\nDelay is time from now until the first future carb entry.\n\nInterval in minutes is how many minutes are between entries. The shorter the interval, the smoother the result. 10, 15, 20, 30, or 60 are reasonable choices.\n\nAdjustment factor is how much effect the fat and protein has on the entries. 1.0 is full effect (original Warsaw Method) and 0.5 is half effect. Note that you may find that your normal carb ratio needs to increase to a larger number if you begin adding fat and protein entries. For this reason, it is best to start with a factor of about 0.5 to ease into it.\n\nDefault settings: Time Cap: 8 h, Interval: 30 min, Factor: 0.5, Delay 60 min";

/* Title */
"Fat and Protein" = "Fat and Protein";

/* Add Fat */
"Fat" = "Fat";

/* Add Protein */
"Protein" = "Protein";

/* Setting */
"Fat And Protein Conversion" = "Fat And Protein Conversion";

/* -------------------------------------------------------------------------------------------
  DASH strings
*/
"Attach Pod" = "Attach Pod";

"Deactivate Pod" = "Desactivar Pod";

/* */
"Deactivating..." = "Deactivating...";

"Pair Pod" = "Pair Pod";

/* Text for previous pod information row */
"Previous Pod Information" = "Previous Pod Information";

/* Text for confidence reminders navigation link */
"Confidence Reminders" = "Confidence Reminders";

"Confidence reminders are beeps from the pod which can be used to acknowledge selected commands." = "Confidence reminders are beeps from the pod which can be used to acknowledge selected commands.";

/* button title for saving low reservoir reminder while saving */
"Saving..." = "Guardando...";

/* button title for saving low reservoir reminder */
"Save" = "Guardar";

/* Alert title for error when updating confidence reminder preference */
"Failed to update confidence reminder preference." = "Failed to update confidence reminder preference.";

/* */
"No Error" = "No Error";

/* description label for active time pod details row */
"Active Time" = "Tiempo Activo";

/* Title string for BeepPreference.silent */
"Disabled" = "Disabled";

/* Title string for BeepPreference.manualCommands */
"Enabled" = "Habilitado";

/* Title string for BeepPreference.extended */
"Extended" = "Extended";

/* Description for BeepPreference.silent */
"No confidence reminders are used." = "No confidence reminders are used.";

/* Description for BeepPreference.manualCommands */
"Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When Loop automatically adjusts delivery, no confidence reminders are used." = "Confidence reminders will sound for commands you initiate, like bolus, cancel bolus, suspend, resume, save notification reminders, etc. When Loop automatically adjusts delivery, no confidence reminders are used.";

/* Description for BeepPreference.extended */
"Confidence reminders will sound when Loop automatically adjusts delivery as well as for commands you initiate." = "Confidence reminders will sound when Loop automatically adjusts delivery as well as for commands you initiate.";

/* Label text for expiration reminder default row */
"Expiration Reminder Default" = "Expiration Reminder Default";

/* */
"Expiration Reminder" = "Recordatorio de Caducidad";

/* */
"Low Reservoir" = "Low Reservoir";

/* Value text for no expiration reminder */
"No Reminder" = "No Reminder";

/* */
"Scheduled Reminder" = "Scheduled Reminder";

/* */
"Low Reservoir Reminder" = "Low Reservoir Reminder";

/* The action string on pod status page when pod data is stale */
"Make sure your phone and pod are close to each other. If communication issues persist, move to a new area." = "Make sure your phone and pod are close to each other. If communication issues persist, move to a new area.";
/* Format string for the action string on pod status page when pod expired. (1: service time remaining) */
"Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains." = "Change Pod now. Insulin delivery will stop in %1$@ or when no more insulin remains.";

/* Label text for temporary basal rate summary */
"Rate" = "Ratio";

/* Summary string for temporary basal rate configuration page */
"%1$@ for %2$@" = "%1$@ for %2$@";

/* Description text on manual temp basal action sheet */
"Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled." = "Loop will not automatically adjust your insulin delivery until the temporary basal rate finishes or is canceled.";
/* Button text for setting manual temporary basal rate*/
"Set Temporary Basal" = "Set Temporary Basal";

/* Navigation Title for ManualTempBasalEntryView */
"Temporary Basal" = "Temporary Basal";

/* Alert title for a failure to set temporary basal */
"Temporary Basal Failed" = "Temporary Basal Failed";

/* Alert format string for a failure to set temporary basal with recovery suggestion. (1: error description) (2: recovery text) */
"Unable to set a temporary basal rate: %1$@\n\n%2$@" = "Unable to set a temporary basal rate: %1$@\n\n%2$@";

/* Alert format string for a failure to set temporary basal. (1: error description) */
"Unable to set a temporary basal rate: %1$@" = "Unable to set a temporary basal rate: %1$@";

/* Alert title for missing temp basal configuration */
"Missing Config" = "Missing Config";

/* Alert format string for missing temp basal configuration. */
"This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate." = "This PumpManager has not been configured with a maximum basal rate because it was added before manual temp basal was a feature. Please go to therapy settings -> delivery limits and set a new maximum basal rate.";

/* description label for active time pod details row */
"Active Time" = "Tiempo Activo";

/* description label for total delivery pod details row */
"Total Delivery" = "Total Delivery";

/* */
"Add Omnipod Dash" = "Add Omnipod Dash";

/* */
"Insert Cannula" = "Insertar Cánula";

/* */
"Check Cannula" = "Check Cannula";

/* */
"Setup Complete" = "Setup Complete";

/* */
"Insulin Suspended" = "Insulin Suspended";

/* Text for suspend resume button when insulin delivery is suspending */
"Suspending insulin delivery..." = "Suspending insulin delivery...";

/* Text for suspend resume button when insulin delivery is suspended */
"Resume Insulin Delivery" = "Resume Insulin Delivery";

/* Text for suspend resume button when insulin delivery is resuming */
"Resuming insulin delivery..." = "Resuming insulin delivery...";

/* Alert title for suspend error */
"Failed to Suspend Insulin Delivery" = "Failed to Suspend Insulin Delivery";

//* -----------------------------------------------------------------------*/
/* ----------------------Statistics strings -------------------------------*/
/* Headline Statistics */


"Statistics" = "Statistics";

/* Option in preferences */
"Display Statistics" = "Display Statistics";

/* infoText: Description for Display Statistics */
"Displays Statistics under the chart view" = "Displays Statistics under the chart view";

/* Low Glucose Limit option in preferences */
"Low Glucose Limit" = "Low Glucose Limit";

/* High Glucose Limit option in preferences */
"High Glucose Limit" = "High Glucose Limit";

/* infoText: Description for Low Glucose Limit */
"BG Under This Value Will Be Displayed As Low Glucose Percentage" = "BG Under This Value Will Be Displayed As Low Glucose Percentage";
/* infoText: Description for High Glucose Limit */
"BG Under This Value Will Be Displayed As High Glucose Percentage" = "BG Under This Value Will Be Displayed As High Glucose Percentage";

/* When statistics.json was last updated */
"Updated" = "Updated";

/* Average BG = */
"Average" = "Average";

/* Median BG */
"Median" = "Median";

/* CGM readings in statPanel */
"Readings" = "Readings";

/* Normal BG (within TIR) */
"Normal" = "Normal";

/* Title High BG in statPanel */
"High (>" = "High (>";

/* Title Low BG in statPanel */
"Low (<" = "Low (<";

/* SD */
"SD" = "SD";

/* CV */
"CV" = "CV";

/* Estimated HbA1c */
"HbA1c" = "HbA1c";

/* Total number of days of data for HbA1c estimation, part 1/2*/
"All" = "All";

/* Total number of days of data for HbA1c estimation, part 2/2*/
"days" = "days";

/* Nr of Loops in statPanel */
"Loops" = "Loops";

/* Loop Errors in statPanel */
"Errors" = "Errors";

/* Average loop interval */
"Interval" = "Interval";

/* Median loop interval */
"Duration" = "Duración";

/* "Display SD */
"Display SD instead of CV" = "Display SD instead of CV";

/* Description for display SD */
"Display Standard Deviation (SD) instead of Coefficient of Variation (CV) in statPanel" = "Display Standard Deviation (SD) instead of Coefficient of Variation (CV) in statPanel";

/* How often to update the statistics */
"Update every number of minutes:" = "Update every number of minutes:";

/* Description for update interval for statistics */
"Default is 20 minutes. How often to update and save the statistics.json and to upload last array, when enabled, to Nightscout." = "Default is 20 minutes. How often to update and save the statistics.json and to upload last array, when enabled, to Nightscout.";

/* Duration displayed in statPanel */
"Past 24 Hours " = "Past 24 Hours ";

/* Duration displayed in statPanel */
"Past Week " = "Past Week ";

/* Duration displayed in statPanel */
"Past Month " = "Past Month ";

/* Duration displayed in statPanel */
"Past 90 Days " = "Past 90 Days ";

/* Duration displayed in statPanel */
"All Past Days of Data " = "All Past Days of Data ";

/* "Display Loop statistics in statPanel */
"Display Loop Cycle statistics" = "Display Loop Cycle statistics";

/* Description for Display Loop statistics */
"Displays Loop statistics in the statPanel in Home View" = "Displays Loop statistics in the statPanel in Home View";

/* Display % */
"Override HbA1c unit" = "Override HbA1c unit";

/* Description for Override HbA1c unit */
"Change default HbA1c unit in statPanlel. The unit in statPanel will be updateded with next statistics.json update" = "Change default HbA1c unit in statPanlel. The unit in statPanel will be updateded with next statistics.json update";

/* HbA1c for all glucose storage days */
"all" = "all";

/* --------------------------------------------------------  Dexcom G7 --------------------------------------*/

"Configuration CGM" = "Configuration CGM";

"Heartbeat" = "Heartbeat";

"CGM address :" = "CGM address :";

"CGM is not used as heartbeat." = "CGM is not used as heartbeat.";

"Are you sure you want to delete this CGM?" = "Are you sure you want to delete this CGM?";

/* -----------------------------------------------------------------------------------------------------------

  Infotexts from openaps.docs and androidaps.docs
  FreeAPS X
*/
/* Headline Rewind Resets Autosens */

"Rewind Resets Autosens" = "Rewind Resets Autosens";

/* ”Rewind Resets Autosens” */
"This feature, enabled by default, resets the autosens ratio to neutral when you rewind your pump, on the assumption that this corresponds to a probable site change. Autosens will begin learning sensitivity anew from the time of the rewind, which may take up to 6 hours. If you usually rewind your pump independently of site changes, you may want to consider disabling this feature." = "Esta función, activada por defecto, restablece la proporción de autosens a neutral cuando rebobinas la bomba, suponiendo que esto corresponde a un probable cambio en el sitio. Autosens comenzará a aprender la sensibilidad desde el momento del evento, y puede tardar hasta 6 horas. Si normalmente rebobina su bomba independientemente de los cambios en el sitio, puede considerar desactivar esta función.";

/* Headline "High Temptarget Raises Sensitivity" */
"High Temptarget Raises Sensitivity" = "High Temptarget Raises Sensitivity";

/* ”High Temptarget Raises Sensitivity" */
"Defaults to false. When set to true, raises sensitivity (lower sensitivity ratio) for temp targets set to >= 111. Synonym for exercise_mode. The higher your temp target above 110 will result in more sensitive (lower) ratios, e.g., temp target of 120 results in sensitivity ratio of 0.75, while 140 results in 0.6 (with default halfBasalTarget of 160)." = "Por defecto 'Falso'. Cuando se cambia a 'Verdadero', aumenta la sensibilidad (menor proporción de sensibilidad) para objetivos temporales fijados en >= 111. Sinónimo de modo ejercicio. Cuanto mayor sea su objetivo temporal superior a 110, resultará en relaciones más sensibles (más bajas), p.ej., objetivo temporal de 120 resulta en una proporción de sensibilidad de 0.75, mientras que 140 resultaría en 0.6 (con un valor por defecto de objetivo basal de 160).";

/* Headline ”Low Temptarget Lowers Sensitivity" */
"Low Temptarget Lowers Sensitivity" = "Low Temptarget Lowers Sensitivity";

/* ”Low Temptarget Lowers Sensitivity" */
"Defaults to false. When set to true, can lower sensitivity (higher sensitivity ratio) for temptargets <= 99. The lower your temp target below 100 will result in less sensitive (higher) ratios, e.g., temp target of 95 results in sensitivity ratio of 1.09, while 85 results in 1.33 (with default halfBasalTarget of 160)." = "Por defecto 'Falso'. Cuando se establece 'Verdadero', puede disminuir la sensibilidad (mayor proporción de sensibilidad) para objetivos temporales <= 99. Cuanto menor sea su objetivo temporal por debajo de 100, resultará en proporciones menos sensibles (superiores), p. ej., el objetivo temporal de 95 resulta en la proporción de sensibilidad de 1.09, mientras que 85 resulta en 1.33 (con la mitad de objetivo predeterminada de 160).";

/* Headline ”Sensitivity Raises Target" */
"Sensitivity Raises Target" = "Sensitivity Raises Target";

/* ”Sensitivity Raises Target" */
"When true, raises BG target when autosens detects sensitivity" = "Cuando es verdadero, aumenta el objetivo BG cuando los autosens detectan sensibilidad";

/* Headline ”Resistance Lowers Target" */
"Resistance Lowers Target" = "Resistance Lowers Target";

/* ”Resistance Lowers Target" */
"Defaults to false. When true, will lower BG target when autosens detects resistance" = "Por defecto es falso. Cuando es verdadero, reducirá el objetivo BG cuando detecte resistencia";

/* Headline ”Advanced Target Adjustments" */
"Advanced Target Adjustments" = "Advanced Target Adjustments";

/* ”Advanced Target Adjustments" */
"This feature was previously enabled by default but will now default to false (will NOT be enabled automatically) in oref0 0.6.0 and beyond. (There is no need for this with 0.6.0). This feature lowers oref0’s target BG automatically when current BG and eventualBG are high. This helps prevent and mitigate high BG, but automatically switches to low-temping to ensure that BG comes down smoothly toward your actual target. If you find this behavior too aggressive, you can disable this feature. If you do so, please let us know so we can better understand what settings work best for everyone." = "Esta característica estaba previamente habilitada por defecto, pero ahora por defecto está deshabilitada (NO se habilitará automáticamente) en oref0 0.6.0 y posteriores (no hay necesidad de esto con 0.6.0). Esta característica reduce automáticamente el valor de glucosa objetivo de oref0 cuando el valor de glucosa actual y eventual son altos. Esto ayuda a prevenir y mitigar la glucemia alta, pero automáticamente cambia a modo 'glucosa baja' para asegurarse de que la glucemia se reduce suavemente hacia el objetivo real. Si encuentra este comportamiento demasiado agresivo, puede desactivar esta función. Si lo hace, por favor, háganoslo saber para que podamos entender mejor qué ajustes funcionan mejor para todos los usuarios.";

/* Headline "Exercise Mode" */
"Exercise Mode" = "Exercise Mode";

/* "Exercise Mode" */
"Defaults to false. When true, > 105 mg/dL high temp target adjusts sensitivityRatio for exercise_mode. Synonym for high_temptarget_raises_sensitivity" = "Por defecto es falso. Cuando es verdadero, el objetivo temporal alto > 105 mg/dL ajusta el factor de sensibilidad para el modo ejercicio. Sinónimo de objetivotemp_alto_incrementa_sensibilidad";

/* Headline "Wide BG Target Range" */
"Wide BG Target Range" = "Wide BG Target Range";

/* "Wide BG Target Range" */
"Defaults to false, which means by default only the low end of the pump’s BG target range is used as OpenAPS target. This is a safety feature to prevent too-wide targets and less-optimal outcomes. Therefore the higher end of the target range is used only for avoiding bolus wizard overcorrections. Use wide_bg_target_range: true to force neutral temps over a wider range of eventualBGs." = "Por defecto es falso, lo que significa que por defecto sólo el extremo bajo del rango objetivo de glucosa en la bomba se utiliza como objetivo en OpenAPS. Esta es una característica de seguridad para prevenir objetivos demasiado amplios y resultados menos óptimos. Por lo tanto, el extremo más alto del rango objetivo sólo es usado para evitar sobre-correcciones del asistente de bolos. Use wide_bg_target_range: true para forzar temporizaciones neutrales sobre un rango más amplio de valores eventuales de glucosa.";

/* Headline "Skip Neutral Temps" */
"Skip Neutral Temps" = "Skip Neutral Temps";

/* "Skip Neutral Temps" */
"Defaults to false, so that FreeAPS X will set temps whenever it can, so it will be easier to see if the system is working, even when you are offline. This means FreeAPS X will set a “neutral” temp (same as your default basal) if no adjustments are needed. This is an old setting for OpenAPS to have the options to minimise sounds and notifications from the 'rig', that may wake you up during the night." = "Por defecto es falso, por lo que FreeAPS X establecerá basales temporales siempre que pueda, por lo que será más fácil ver si el sistema está funcionando, incluso cuando esté fuera de línea. Esto significa que OpenAPS establecerá una basal temporal “neutral” (igual que su basal por defecto) si no se necesitan ajustes. Esta es una configuración antigua para que OpenAPS tenga las opciones para minimizar sonidos y notificaciones del 'rig', que puede despertarte durante la noche. ";

/* Headline "Unsuspend If No Temp” */
"Unsuspend If No Temp" = "Unsuspend If No Temp";

/* "Unsuspend If No Temp” */
"Many people occasionally forget to resume / unsuspend their pump after reconnecting it. If you’re one of them, and you are willing to reliably set a zero temp basal whenever suspending and disconnecting your pump, this feature has your back. If enabled, it will automatically resume / unsuspend the pump if you forget to do so before your zero temp expires. As long as the zero temp is still running, it will leave the pump suspended." = "Muchas personas de vez en cuando se olvidan de reanudar / dejar de suspender su bomba después de volver a conectarla. Si es uno de ellos, y está dispuesto a establecer de manera fiable una basal temporal cero unidades cada vez que suspenda y desconecte su bomba esta característica es para usted. Si está activado, se reanudará / des-suspenderá automáticamente la bomba si se olvida de hacerlo antes de que expire la basal temporal de cero unidades. Mientras la basal temporal de cero unidades siga funcionando, dejará la bomba suspendida.";

/* Headline "Enable UAM" */
"Enable UAM" = "Enable UAM";

/* "Enable UAM" */
"With this option enabled, the SMB algorithm can recognize unannounced meals. This is helpful, if you forget to tell FreeAPS X about your carbs or estimate your carbs wrong and the amount of entered carbs is wrong or if a meal with lots of fat and protein has a longer duration than expected. Without any carb entry, UAM can recognize fast glucose increasments caused by carbs, adrenaline, etc, and tries to adjust it with SMBs. This also works the opposite way: if there is a fast glucose decreasement, it can stop SMBs earlier." = "Con esta opción activada, el algoritmo SMB puede reconocer comidas no anunciadas. Esto es útil si olvida decir a FreeAPS X sobre sus carbohidratos, estima mal sus carbohidratos y los introduce erróneamente en la aplicación, o si una comida con mucha grasa y proteína tiene una duración más larga de lo esperado. Sin ninguna entrada de carbohidratos, UAM puede reconocer aumentos rápidos de glucosa causados por carbohidratos, adrenalina, estrés, etc. e intenta ajustarlo con SMBs. Esto también funciona al contrario: si hay una rápida disminución de la glucosa, puede detener a los SMB antes.";

/* Headline "Enable SMB With COB" */
"Enable SMB With COB" = "Enable SMB With COB";

/* Enable SMB With COB" */
"This enables supermicrobolus (SMB) while carbs on board (COB) are positive." = "Esto permite el supermicrobolo (SMB) mientras que los glúcidos a bordo (COB) son positivos.";

/* Headline "Enable SMB With Temptarget” */
"Enable SMB With Temptarget" = "Enable SMB With Temptarget";

/* "Enable SMB With Temptarget” */
"This enables supermicrobolus (SMB) with eating soon / low temp targets. With this feature enabled, any temporary target below 100mg/dL, such as a temp target of 99 (or 80, the typical eating soon target) will enable SMB." = "Esto activa supermicrobolos (SMB) con 'Comer Pronto' o basales temporales bajas. 
Con esta característica activada, cualquier objetivo temporal por debajo de 100mg/dL, tal como un objetivo temporal de 99 (u 80, el objetivo típico de 'Comer Pronto') se permitirán SMB.";

/* Headline "Enable SMB Always" */
"Enable SMB Always" = "Enable SMB Always";

/* "Enable SMB Always" */
"Defaults to false. When true, always enable supermicrobolus (unless disabled by high temptarget)." = "Por defecto es falso. Cuando es verdadero, activa siempre el supermicrobolo (a menos que esté desactivado por un objetivo temporal alto).";

/* Headline "Enable SMB After Carbs" */
"Enable SMB After Carbs" = "Enable SMB After Carbs";

/* "Enable SMB After Carbs" */
"Defaults to false. When true, enables supermicrobolus (SMB) for 6h after carbs, even with 0 carbs on board (COB)." = "Por defecto es falso. Cuando es verdadero, habilita supermicrobolos (SMB) durante 6h después de la ingesta de carbohidratos, incluso con 0 carbohidratos a bordo (COB).";

/* Enable "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* Headline "Allow SMB With High Temptarget" */
"Allow SMB With High Temptarget" = "Allow SMB With High Temptarget";

/* "Allow SMB With High Temptarget" */
"Defaults to false. When true, allows supermicrobolus (if otherwise enabled) even with high temp targets (> 100 mg/dl)." = "Por defecto es falso. Cuando es verdadero, permite supermicrobolos (si se habilita de otra manera) incluso con objetivos temporales altos.";

/* Headline "Use Custom Peak Time” */
"Use Custom Peak Time" = "Use Custom Peak Time";

/* "Use Custom Peak Time” */
"Defaults to false. Setting to true allows changing insulinPeakTime" = "Por defecto es falso. Cambiarlo a verdadero permite cambiar el insulinPeakTime";

/* Headline "Suspend Zeros IOB” */
"Suspend Zeros IOB" = "Suspend Zeros IOB";

/* "Suspend Zeros IOB” */
"Default is false. Any existing temp basals during times the pump was suspended will be deleted and 0 temp basals to negate the profile basal rates during times pump is suspended will be added." = "Por defecto es falso. Cualquier basal temporal existente durante las horas de suspensión de la bomba se eliminará y se añadirán basales temporales de 0 unidades para negar las tasas basales del perfil durante las horas de suspensión de la bomba.";

/* Headline "Max IOB" */
"Max IOB" = "Max IOB";

/* "Max IOB" */
"Max IOB is the maximum amount of insulin on board from all sources – both basal (or SMB correction) and bolus insulin – that your loop is allowed to accumulate to treat higher-than-target BG. Unlike the other two OpenAPS safety settings (max_daily_safety_multiplier and current_basal_safety_multiplier), max_iob is set as a fixed number of units of insulin. As of now manual boluses are NOT limited by this setting. \n\n To test your basal rates during nighttime, you can modify the Max IOB setting to zero while in Closed Loop. This will enable low glucose suspend mode while testing your basal rates settings\n\n(Tip from https://www.loopandlearn.org/freeaps-x/#open-loop)." = "Max IOB es la cantidad máxima de insulina a bordo de todas las fuentes –tanto la corrección basal (o SMB de la corrección) como la insulina del bolo– que su Circuito Cerrado puede acumular para tratar glucemias por encima del objetivo. A diferencia de los otros dos ajustes de seguridad de OpenAPS (multiplicador_seguridad_max_diario y multiplicador_seguridad_basal_actual), max_iob se establece como un número fijo de unidades de insulina. Por ahora, los bolos manuales NO se limitan con este ajuste.

Para probar sus diferentes basales durante la noche, puede modificar la configuración max_iob a cero mientras está en Circuito Cerrado. Esto activará el modo de suspensión por glucosa baja mientras prueba sus configuraciones de basal

(Consejo de https://www.loopandlearn.org/freeaps-x/#open-loop).";

/* Headline "Max Daily Safety Multiplier" */
"Max Daily Safety Multiplier" = "Max Daily Safety Multiplier";

/* "Max Daily Safety Multiplier" */
"This is an important OpenAPS safety limit. The default setting (which is unlikely to need adjusting) is 3. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 3x the highest hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "Este es un importante límite de seguridad de OpenAPS. La configuración predeterminada (que es poco probable que necesite ajustarse) es 3. Esto significa que OpenAPS nunca podrá establecer una tasa basal temporal que sea más de 3 veces la tasa basal más alta programada en una bomba de usuario o, si está activado, determinado por autotune.";

/* Headline "Current Basal Safety Multiplier" */
"Current Basal Safety Multiplier" = "Current Basal Safety Multiplier";

/* "Current Basal Safety Multiplier" */
"This is another important OpenAPS safety limit. The default setting (which is also unlikely to need adjusting) is 4. This means that OpenAPS will never be allowed to set a temporary basal rate that is more than 4x the current hourly basal rate programmed in a user’s pump, or, if enabled, determined by autotune." = "Este es otro límite importante de seguridad de OpenAPS. La configuración predeterminada (que es poco probable que necesite ajustarse) es 4. Esto significa que OpenAPS nunca podrá establecer una tasa basal temporal que sea más de 4 veces la tasa basal más alta programada en una bomba de usuario o, si está activado, determinado por autotune.";

/* Headline "Autosens Max" */
"Autosens Max" = "Autosens Max";

/* "Autosens Max" */
"This is a multiplier cap for autosens (and autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target." = "Este es un multiplicador límite para autosens (y autotune) para establecer un límite máximo del 20% sobre cuanto el ratio de autosens, que a su vez determina cuán altos autosens pueden ajustar basales, cuán bajo puede ajustar ISF, y cuán bajo puede establecer el objetivo de glucosa.";

/* Headline "Autosens Min" */
"Autosens Min" = "Autosens Min";

/* "Autosens Min" */
"The other side of the autosens safety limits, putting a cap on how low autosens can adjust basals, and how high it can adjust ISF and BG targets." = "El otro lado de los límites de seguridad de Autosens, poniendo un tope a cuán bajo Autosens puede ajustar basales, y cuán alto puede ajustar el factor de sensibilidad de la insulina y los objetivos de glucosa.";

/* Headline "Half Basal Exercise Target" */
"Half Basal Exercise Target" = "Half Basal Exercise Target";

/* "Half Basal Exercise Target" */
"Set to a number, e.g. 160, which means when temp target is 160 mg/dL and exercise_mode=true, run 50% basal at this level (120 = 75%; 140 = 60%). This can be adjusted, to give you more control over your exercise modes." = "Establecer a un número, p. ej. 160, lo que significaría que cuando el objetivo temporal es 160 mg/dL y el modo ejercicio esté activo, proporciona el 50% de la basal a este nivel (120 = 75%; 140 = 60%). Esto puede ser ajustado para darle más control sobre sus modos de ejercicio.";

/* Headline "Max COB" */
"Max COB" = "Max COB";

/* "Max COB" */
"This defaults maxCOB to 120 because that’s the most a typical body can absorb over 4 hours. (If someone enters more carbs or stacks more; OpenAPS will just truncate dosing based on 120. Essentially, this just limits AMA as a safety cap against weird COB calculations due to fluky data.)" = "El valor por defecto de maxCOB es 120, ya que es la cantidad estándar de carbohidratos que un cuerpo normal puede absorber durante 4 horas (si alguien registra más carbohidratos o se acumulan por encima de este valor, OpenAPS limitará la dosificación de insulina basada en dichos 120 gramos activos). Esencialmente, esto limita la AMA como medida de seguridad contra cálculos extraños de COB debido a datos imprecisos";

/* Headline "Bolus Snooze DIA Divisor" */
"Bolus Snooze DIA Divisor" = "Bolus Snooze DIA Divisor";

/* "Bolus Snooze DIA Divisor" */
"Bolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2)." = "El retardo de bolos se realiza después de suministrar un bolo para comer, para que el Lazo no contrarreste con basales temporales bajas cuando acaba de comer. Por ejemplo, con el valor predeterminado de 2, y siendo la duración de la insulina activa (DIA) de 3 horas, el retardo del del bolo se realizará gradualmente durante 1.5 horas (3DIA % 2).";

/* Headline "Min 5m Carbimpact" */
"Min 5m Carbimpact" = "Min 5m Carbimpact";

/* "Min 5m Carbimpact" */
"This is a setting for default carb absorption impact per 5 minutes. The default is an expected 8 mg/dL/5min. This affects how fast COB is decayed in situations when carb absorption is not visible in BG deviations. The default of 8 mg/dL/5min corresponds to a minimum carb absorption rate of 24g/hr at a CSF of 4 mg/dL/g." = "Este es un ajuste para el impacto de absorción de carbohidratos por defecto cada 5 minutos. El valor por defecto es de 8 mg/dL/5min. Esto afecta a la rapidez con que se reducen los COB en situaciones en las que la absorción de glúcidos no es visible en las variaciones de glucosa. El valor por defecto de 8 mg/dL/5min corresponde a una tasa mínima de absorción de carbohidratos de 24g/h con factor de sensibilidad de carbohidratos (CSF) de 4 mg/dL/g.";

/* Headline "Autotune ISF Adjustment Fraction" */
"Autotune ISF Adjustment Fraction" = "Autotune ISF Adjustment Fraction";

/* "Autotune ISF Adjustment Fraction" */
"The default of 0.5 for this value keeps autotune ISF closer to pump ISF via a weighted average of fullNewISF and pumpISF. 1.0 allows full adjustment, 0 is no adjustment from pump ISF." = "El valor por defecto de 0.5 para esta característica mantiene el factor de sensibilidad a la insulina (ISF) de Autotune cerca del factor de sensibilidad a la insulina de la bomba a través de un promedio ponderado de fullNewISF y pumpISF. 
Un 1.0 de valor permite un ajuste completo con el nuevo factor de sensibilidad de Autotune (fullNewISF), mientras que 0 mantendría el factor de sensibilidad de la bomba (pumpISF).";

/* Headline "Remaining Carbs Fraction" */
"Remaining Carbs Fraction" = "Remaining Carbs Fraction";

/* "Remaining Carbs Fraction" */
"This is the fraction of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "Esta es la fracción de los carbohidratos que suponemos se absorberán durante 4h si todavía no vemos absorción de carbohidratos.";

/* Headline "Remaining Carbs Cap" */
"Remaining Carbs Cap" = "Remaining Carbs Cap";

/* "Remaining Carbs Cap" */
"This is the amount of the maximum number of carbs we’ll assume will absorb over 4h if we don’t yet see carb absorption." = "Esta es la cantidad máxima de carbohidratos que suponemos se absorberán durante 4h si todavía no vemos absorción de carbohidratos.";

/* Headline ”Max SMB Basal Minutes" */
"Max SMB Basal Minutes" = "Max SMB Basal Minutes";

/* ”Max SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered as a single SMB with uncovered COB. This gives the ability to make SMB more aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. It is not recommended to set this value higher than 90 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Por defecto comienza en 30. Este es el máximo de minutos de basal que se puede entregar como un solo SMB con COB no cubiertos. Esto da la capacidad de hacer los SMB más agresivos si lo desea. Se recomienda que el valor se establezca a partir de 30, en línea con el valor predeterminado, y si decide aumentar este valor, hacerlo en incrementos de no más de 15 minutos, vigilando de cerca los efectos de los cambios. No se recomienda establecer este valor superior a 90 minutos, ya que esto puede afectar a la capacidad del algoritmo para poner suspender la basal temporalmente. Se recomienda también usar Pushover cuando se establezca un valor mayor que el predeterminado, para que las alarmas se generen para cualquier hipo o hiper prevista.";

/* Headline "Max UAM SMB Basal Minutes" */
"Max UAM SMB Basal Minutes" = "Max UAM SMB Basal Minutes";

/* "Max UAM SMB Basal Minutes" */
"Defaults to start at 30. This is the maximum minutes of basal that can be delivered by UAM as a single SMB when IOB exceeds COB. This gives the ability to make UAM more or less aggressive if you choose. It is recommended that the value is set to start at 30, in line with the default, and if you choose to increase this value, do so in no more than 15 minute increments, keeping a close eye on the effects of the changes. Reducing the value will cause UAM to dose less insulin for each SMB. It is not recommended to set this value higher than 60 mins, as this may affect the ability for the algorithm to safely zero temp. It is also recommended that pushover is used when setting the value to be greater than default, so that alerts are generated for any predicted lows or highs." = "Por defecto comienza en 30. Este es el máximo de minutos de basal que UAM puede entregar como un solo SMB cuando la insulina activa excede los carbohidratos activos. Esto da la capacidad de hacer UAM más o menos agresivo si lo desea. Se recomienda que el valor se establezca a partir de 30, en línea con el valor predeterminado, y si decide aumentar este valor, hacerlo en incrementos de no más de 15 minutos, vigilando de cerca los efectos de los cambios. Reducir el valor hará que UAM inyecte menos insulina para cada SMB. No se recomienda establecer este valor superior a 60 minutos, ya que esto puede afectar a la capacidad del algoritmo de suspender la basal temporalmente. También se recomienda que Pushover sea usado cuando se establece que el valor es mayor de lo predeterminado, para que las alertas se generen para cualquier bajo o alto previsto.";

/* Headline "SMB Interval" */
"SMB Interval" = "SMB Interval";

/* "SMB Interval" */
"Minimum duration in minutes for new SMB since last SMB or manual bolus" = "Minimum duration in minutes for new SMB since last SMB or manual bolus";

/* Headline "Bolus Increment" */
"Bolus Increment" = "Bolus Increment";

/* "Bolus Increment" */
"Smallest enacted SMB amount. Minimum amount for Omnipod pumps is 0.05 U, whereas for Medtronic pumps it differs for various models, from 0.025 U to 0.10 U. Please check the minimum bolus amount which can be delivered by your pump. The default value is 0.1." = "Smallest enacted SMB amount. Minimum amount for Omnipod pumps is 0.05 U, whereas for Medtronic pumps it differs for various models, from 0.025 U to 0.10 U. Please check the minimum bolus amount which can be delivered by your pump. The default value is 0.1.";

/* Headline "Insulin Peak Time" */
"Insulin Peak Time" = "Insulin Peak Time";

/* "Insulin Peak Time" */
"Time of maximum blood glucose lowering effect of insulin, in minutes. Beware: Oref assumes for ultra-rapid (Lyumjev) & rapid-acting (Fiasp) curves minimal (35 & 50 min) and maximal (100 & 120 min) applicable insulinPeakTimes. Using a custom insulinPeakTime outside these bounds will result in issues with FreeAPS-X, longer loop calculations and possible red loops." = "Tiempo del máximo efecto de disminución de glucosa de la insulina, en minutos";

/* Headline "Carbs Req Threshold" */
"Carbs Req Threshold" = "Carbs Req Threshold";

/* "Carbs Req Threshold" */
"Grams of carbsReq to trigger a pushover. Defaults to 1 (for 1 gram of carbohydrate). Can be increased if you only want to get Pushover for carbsReq at X threshold." = "Gramos de carbsReq para activar un Pushover. Por defecto es 1 (para 1 gramo de hidratos de carbono). Se puede aumentar si sólo quiere obtener Pushovers con carbsReq en X umbral.";

/* Headline "Noisy CGM Target Multiplier" */
"Noisy CGM Target Multiplier" = "Noisy CGM Target Multiplier";

/* "Noisy CGM Target Multiplier" */
"Defaults to 1.3. Increase target by this amount when looping off raw/noisy CGM data" = "Por defecto es 1.3. Aumenta el objetivo en esta cantidad al montar un lazo con los datos sin procesar/ruidosos del MCG";

/* Headline "SMB DeliveryRatio" */
"SMB DeliveryRatio" = "SMB DeliveryRatio";

/* SMB DeliveryRatio */
"Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution." = "Default value: 0.5 This is another key OpenAPS safety cap, and specifies what share of the total insulin required can be delivered as SMB. Increase this experimental value slowly and with caution.";

// Dynamic ISF + CR Settings:
/* Headline "Adjust Dynamic ISF constant" */

"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Enable Dynamic ISF, Headline */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Headline "Enable Dynamic ISF" */
"Enable Dynamic ISF" = "Enable Dynamic ISF";

/* Enable Dynamic ISF */
"Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes" = "Calculate a new ISF with every loop cycle. New ISF will be based on current BG, TDD of insulin (past 24 hours or a weighted average) and an Adjustment Factor (default is 1).\n\nDynamic ISF and CR ratios will be limited by your autosens.min/max limits.\n\nDynamic ratio replaces the autosens.ratio: New ISF = Static ISF / Dynamic ratio,\nDynamic ratio = profile.sens * adjustmentFactor * tdd * Math.log(BG/insulinFactor+1) / 1800,\ninsulinFactor = 120 - InsulinPeakTimeInMinutes";

/* Headline "Enable Dynamic CR" */
"Enable Dynamic CR" = "Enable Dynamic CR";

/* Enable Dynamic CR */
"Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)" = "Use Dynamic CR. The dynamic ratio will be used for CR as follows:\n\n When ratio > 1:  dynCR = (newRatio - 1) / 2 + 1.\nWhen ratio < 1: dynCR = CR/dynCR.\n\nDon't use toghether with a high Insulin Fraction (> 2)";

/* Headline "Adjust Dynamic ISF constant" */
"Adjust Dynamic ISF constant" = "Adjust Dynamic ISF constant";

/* Adjust Dynamic ISF constant */
"Adjust Dynamic ratios by a constant. Default is 1. Higher than 1 => lower ISF" = "Adjust Dynamic ratios by a constant. Default is 1. Higher than 1 => lower ISF";


/* Headline "Use Sigmoid Function" */
"Use Sigmoid Function" = "Use Sigmoid Function";

/* Use Sigmoid Function */
"Use a sigmoid function for ISF (and for CR, when enabled), instead of the default Logarithmic formula. Requires the Dynamic ISF setting to be enabled in settings\n\nThe Adjustment setting adjusts the slope of the curve (Y: Dynamic ratio, X: Blood Glucose). A lower value ==> less steep == less aggressive.\n\nThe autosens.min/max settings determines both the max/min limits for the dynamic ratio AND how much the dynamic ratio is adjusted. If AF is the slope of the curve, the autosens.min/max is the height of the graph, the Y-interval, where Y: dynamic ratio. The curve will always have a sigmoid shape, no matter which autosens.min/max settings are used, meaning these settings have big consequences for the outcome of the computed dynamic ISF. Please be careful setting a too high autosens.max value. With a proper profile ISF setting, you will probably never need it to be higher than 1.5\n\nAn Autosens.max limit > 1.5 is not advisable when using the sigmoid function." = "Use a sigmoid function for ISF (and for CR, when enabled), instead of the default Logarithmic formula. Requires the Dynamic ISF setting to be enabled in settings\n\nThe Adjustment setting adjusts the slope of the curve (Y: Dynamic ratio, X: Blood Glucose). A lower value ==> less steep == less aggressive.\n\nThe autosens.min/max settings determines both the max/min limits for the dynamic ratio AND how much the dynamic ratio is adjusted. If AF is the slope of the curve, the autosens.min/max is the height of the graph, the Y-interval, where Y: dynamic ratio. The curve will always have a sigmoid shape, no matter which autosens.min/max settings are used, meaning these settings have big consequences for the outcome of the computed dynamic ISF. Please be careful setting a too high autosens.max value. With a proper profile ISF setting, you will probably never need it to be higher than 1.5\n\nAn Autosens.max limit > 1.5 is not advisable when using the sigmoid function.";


/* Headline "Threshold Setting" */
"Threshold Setting (mg/dl)" = "Threshold Setting (mg/dl)";

/* Threshold Setting */
"The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl." = "The default threshold in FAX depends on your current minimum BG target, as follows:\n\nIf your minimum BG target = 90 mg/dl -> threshold = 65 mg/dl,\n\nif minimum BG target = 100 mg/dl -> threshold = 70 mg/dl,\n\nminimum BG target = 110 mg/dl -> threshold = 75 mg/dl,\n\nand if minimum BG target = 130 mg/dl  -> threshold = 85 mg/dl.\n\nThis setting allows you to change the default to a higher threshold for looping with dynISF. Valid values are 65 mg/dl<= Threshold Setting <= 120 mg/dl.";

/* Headline "Weighted Average of TDD. Weight of past 24 hours:" */
"Weighted Average of TDD. Weight of past 24 hours:" = "Weighted Average of TDD. Weight of past 24 hours:";

/* Weight of past 24 hours of insulin */
"Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment)." = "Has to be > 0 and <= 1.\nDefault is 0.65 (65 %) * TDD. The rest will be from average of total data (up to 14 days) of all TDD calculations (35 %). To only use past 24 hours, set this to 1.\n\nTo avoid sudden fluctuations, for instance after a big meal, an average of the past 2 hours of TDD calculations is used instead of just the current TDD (past 24 hours at this moment).";

/* Headline "Adjust basal" */
"Adjust basal" = "Adjust basal";

/* Enable adjustment of basal profile */
"Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD" = "Enable adjustment of basal based on the ratio of current TDD / 7 day average TDD";

/* Headline "Max Delta-BG Threshold SMB" */
"Max Delta-BG Threshold SMB" = "Max Delta-BG Threshold SMB";

/* Max Delta-BG Threshold SMB */
"Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!)." = "Defaults to 0.2 (20%). Maximum positive percentual change of BG level to use SMB, above that will disable SMB. Hardcoded cap of 40%. For UAM fully-closed-loop 30% is advisable. Observe in log and popup (maxDelta 27 > 20% of BG 100 - disabling SMB!).";

/* Headline "... When Blood Glucose Is Over (mg/dl):" */
"... When Blood Glucose Is Over (mg/dl):" = "... When Blood Glucose Is Over (mg/dl):";

/* ... When Blood Glucose Is Over (mg/dl): */
"Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable." = "Set the value enableSMB_high_bg will compare against to enable SMB. If BG > than this value, SMBs should enable.";

/* Headline "Enable SMB With High BG" */
"Enable SMB With High BG" = "Enable SMB With High BG";

/* "Enable SMB With High BG" */
"Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)" = "Enable SMBs when a high BG is detected, based on the high BG target (adjusted or profile)";

/* Headline "Dynamic settings" */
"Dynamic settings" = "Dynamic settings";

/* Insulin curve */
"Insulin curve" = "Insulin curve";

/* Headline "Adjustment Factor" */
"Adjustment Factor" = "Adjustment Factor";