Crowdin updates (#73)

Dependencies/CGMBLEKit/CGMBLEKit/de.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "Unbekannte Charakteristik";
-

Dependencies/CGMBLEKit/CGMBLEKit/es.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "Característica desconocida";
-

Dependencies/CGMBLEKit/CGMBLEKit/fr.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "Caractéristique inconnue";
-

Dependencies/CGMBLEKit/CGMBLEKit/it.lproj/Localizable.strings

@@ -17,26 +17,25 @@
 "Peripheral command was invalid" = "Il comando della periferica non era valido";
 
 /* Timeout error description */
-"Peripheral did not respond in time" = "La periferica non ha risposto nel tempo limite";
+"Peripheral did not respond in time" = "La periferica non ha risposto entro il tempo limite";
 
 /* Not ready error description */
-"Peripheral isnʼt connected" = "La periferica non e' connessa";
+"Peripheral isnʼt connected" = "La periferica non è connessa";
 
 /* The description of sensor calibration state when sensor calibration is ok. */
-"Sensor calibration is OK" = "La calibrazione del sensore e' valida";
+"Sensor calibration is OK" = "La calibrazione del sensore è valida";
 
 /* The description of sensor calibration state when raw value is unknown. (1: missing data details) */
-"Sensor is in unknown state %1$d" = "Il Sensore e' in un stato%1$d sconosciuto";
+"Sensor is in unknown state %1$d" = "Il Sensore è in un stato %1$d sconosciuto";
 
 /* The description of sensor calibration state when sensor sensor is stopped. */
-"Sensor is stopped" = "Il Sensore e' fermato";
+"Sensor is stopped" = "Il Sensore è fermo";
 
 /* The description of sensor calibration state when sensor sensor is warming up. */
-"Sensor is warming up" = "Il Sensore si sta riscaldando";
+"Sensor is warming up" = "Il sensore è in fase di avvio";
 
 /* The description of sensor calibration state when sensor needs calibration. */
 "Sensor needs calibration" = "Il sensore necessita di calibrazione";
 
 /* Error description */
 "Unknown characteristic" = "Caratteristica sconosciuta";
-

Dependencies/CGMBLEKit/CGMBLEKit/nb.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "Ukjent karakteristikk";
-

Dependencies/CGMBLEKit/CGMBLEKit/nl.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "Onbekende eigenschap";
-

Dependencies/CGMBLEKit/CGMBLEKit/pl.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "Nieznany błąd";
-

Dependencies/CGMBLEKit/CGMBLEKit/ru.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "Неизвестная характеристика";
-

Dependencies/CGMBLEKit/CGMBLEKit/zh-Hans.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* Error description */
 "Unknown characteristic" = "未知特性";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/da.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Seneste kalibrering";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Seneste forbindelse";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Seneste aflæsning";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Åben app";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Synkronisering af fjerndata";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensor udløbet";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Sensor udløber";
-
 /* Title describing sensor session age */
 "Session Age" = "Session-alder";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/da.lproj/TransmitterManagerSetup.strings

@@ -21,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Indtast det 6-cifrede sender-ID";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "Sender-ID'et kan findes trykt på bagsiden af ​​enheden, på den side af boksen, den kom i, og fra indstillingsmenuerne på modtageren og mobilappen.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Sender ID";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/de.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Letzte Kalibrierung";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Letzte Verbindung";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Letzter Wert";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "App öffnen";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Remote Daten Synchronisation";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensor abgelaufen";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Sensor-Ablaufzeitpunkt";
-
 /* Title describing sensor session age */
 "Session Age" = "Sitzungsalter";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/de.lproj/TransmitterManagerSetup.strings

@@ -7,6 +7,12 @@
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "Detail";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "Die Transmitter-ID befindet sich auf der Rückseite des Transmitters, an der Seite der Verpackung und in den Einstellungsmenüs des Empfängers sowie der Dexcom-App.";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "Transmitter-ID";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.footerTitle" = "Daten können über das Internet von Share heruntergeladen werden, wenn die Verbindung zum Transmitter unterbrochen ist.";
 
@@ -15,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Geben Sie die 6-stellige Transmitter-ID ein";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "Die Transmitter-ID befindet sich auf der Rückseite des Transmitters, an der Seite der Verpackung und in den Einstellungsmenüs des Empfängers sowie der Dexcom-App.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Transmitter-ID";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/es.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Calibración más reciente";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Conexión más reciente";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Dato más reciente";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Abrir App";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Sincronización remota de datos";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensor caducado";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "El sensor caduca";
-
 /* Title describing sensor session age */
 "Session Age" = "Tiempo de sesión del sensor";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/es.lproj/TransmitterManagerSetup.strings

@@ -7,6 +7,12 @@
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "Detalle";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "La identificación del transmisor puede encontrarse en la parte trasera del dispositivo, en el lateral de la caja en la que venía, o en los menús de ajustes del receptor y la app del teléfono móvil. ";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "Identificación del transmisor";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.footerTitle" = "Los datos pueden descargarse, vía internet, desde el Share cuando la conexión del transmisor falla.";
 
@@ -15,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Introduzca la identificación de 6 cifras del transmisor";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "La identificación del transmisor puede encontrarse en la parte trasera del dispositivo, en el lateral de la caja en la que venía, o en los menús de ajustes del receptor y la app del teléfono móvil. ";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Identificación del transmisor";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/fr.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Dernier étalonnage";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Dernière connexion";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Dernière mesure";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Ouvrir l’application";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Synchronisation des données à distance";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Capteur expiré";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Le capteur expire";
-
 /* Title describing sensor session age */
 "Session Age" = "L’âge de la session";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/fr.lproj/TransmitterManagerSetup.strings

@@ -21,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Entrez l’ID du transmetteur, composé de 6 lettres et chiffres";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "L’ID du transmetteur se trouve sur le dos de l’appareil, sur la boîte dans laquelle il est fourni, et depuis les menus de réglages du récepteur et de l’application mobile.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "ID du transmetteur";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/he.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Latest Calibration";
 
-/* Section title for latest connection date */
-"Latest Connection" = "חיבור אחרון";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Latest Reading";
 
@@ -35,8 +32,8 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Open App";
 
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensor Expired";
+/* Title describing sensor session age */
+"Session Age" = "Session Age";
 
 /* Section title for remote data synchronization */
 "Remote Data Synchronization" = "Remote Data Synchronization";
@@ -44,8 +41,8 @@ Title text for the button to remove a CGM from Loop */
 /* Title describing sensor expiration */
 "Sensor Expires" = "Sensor Expires";
 
-/* Title describing sensor session age */
-"Session Age" = "Session Age";
+/* Title describing past sensor expiration */
+"Sensor Expired" = "Sensor Expired";
 
 /* Title describing CGM calibration and battery state */
 "Status" = "Status";

Dependencies/CGMBLEKit/CGMBLEKitUI/he.lproj/TransmitterManagerSetup.strings

@@ -7,6 +7,12 @@
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "Detail";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app.";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "Transmitter ID";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.footerTitle" = "Data can be downloaded over the Internet from Share when the transmitter connection fails.";
 
@@ -15,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Enter the 6-digit transmitter ID";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Transmitter ID";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/it.lproj/Localizable.strings

@@ -1,5 +1,5 @@
 /* Format string for glucose trend per minute. (1: glucose value and unit) */
-"%@/min" = "%@/min";
+"%@/min" = "%@/minuto";
 
 /* Confirmation message for deleting a CGM */
 "Are you sure you want to delete this CGM?" = "Sei sicuro di voler eliminare questo CGM?";
@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Ultima calibrazione";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Ultima connessione";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Ultima lettura";
 
@@ -35,26 +32,17 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Apri app";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Sincronizzazione di dati remoti";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensore Scaduto";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Scadenza Sensore";
-
 /* Title describing sensor session age */
 "Session Age" = "Età sessione";
 
 /* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Sincronizzazione di dati remoti";
+"Remote Data Synchronization" = "Sincronizzazione dei dati remoti";
 
 /* Title describing sensor expiration */
-"Sensor Expires" = "Scadenza Sensore";
+"Sensor Expires" = "Scadenza sensore";
 
 /* Title describing past sensor expiration */
-"Sensor Expired" = "Sensore Scaduto";
+"Sensor Expired" = "Sensore scaduto";
 
 /* Title describing CGM calibration and battery state */
 "Status" = "Stato";
@@ -69,4 +57,4 @@ Title text for the button to remove a CGM from Loop */
 "Trend" = "Tendenza";
 
 /* The title text for the upload glucose switch cell */
-"Upload Readings" = "Carica Letture";
+"Upload Readings" = "Carica letture";

Dependencies/CGMBLEKit/CGMBLEKitUI/it.lproj/TransmitterManagerSetup.strings

@@ -2,23 +2,22 @@
 "5oU-vK-JHQ.text" = "Credenziali";
 
 /* Class = "UITableViewController"; title = "Transmitter Setup"; ObjectID = "Dds-49-o7G"; */
-"Dds-49-o7G.title" = "Configurazione";
+"Dds-49-o7G.title" = "Configurazione trasmettitore";
 
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "Dettaglio";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "L'ID del trasmettitore è riportato sul retro del dispositivo, ai lati della confezione di imballaggio e nel menù impostazioni del ricevitore dell’app per dispositivi mobili.";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "ID trasmettitore";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
-"k1N-Rg-XDy.footerTitle" = "In caso di problemi di connessione del trasmettitore, puoi scaricare i dati da Internet grazie alla funzionalità Condividi.";
+"k1N-Rg-XDy.footerTitle" = "In caso di problemi di connessione del trasmettitore, puoi scaricare i dati da Internet grazie alla funzionalità Share.";
 
 /* Class = "UITableViewSection"; headerTitle = "Dexcom Share"; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.headerTitle" = "Dexcom Share";
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Inserisci ID a 6 cifre del trasmettitore";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "L'ID del trasmettitore è riportato sul retro del dispositivo, ai lati della confezione di imballaggio e nel menù Impostazioni del ricevitore e dell’app per dispositivi mobili.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "ID trasmettitore";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/nb.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Siste kalibrering";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Siste forbindelse";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Siste måling";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Åpne app";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Synkronisering av eksterne data";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensor utløpt";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Sensor utløper";
-
 /* Title describing sensor session age */
 "Session Age" = "Alder på økt";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/nb.lproj/TransmitterManagerSetup.strings

@@ -7,6 +7,12 @@
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "Detalj";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "Sender ID finner du på baksiden av senderen, eller på siden av esken den kom i, eller under innstillinger i appen til senderen.";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "Sender ID";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.footerTitle" = "Data kan lastes ned over internett fra Share-server om tilkobling til sender ikke fungerer.";
 
@@ -15,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Skriv 6-siffret sender ID";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "Sender ID finner du på baksiden av senderen, eller på siden av esken den kom i, eller under innstillinger i appen til senderen.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Sender ID";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/nl.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Laatste Kalibratie";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Laatste Verbinding";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Laatste Meting";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Open App";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Remote Gegevenssynchronisatie";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensor Verlopen";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Sensor Verloopt";
-
 /* Title describing sensor session age */
 "Session Age" = "Sessieduur";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/nl.lproj/TransmitterManagerSetup.strings

@@ -21,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Vul de 6 cijferige zenderserienummer in";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "De zenderserienummer staat achter op het apparaat, op de zijkant van de verpakking en in het instellingenmenu van de ontvanger en de app.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Zenderserienummer";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/pl.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Ostatnia kalibracja";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Ostatnie połączenie";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Ostatni odczyt";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Otwórz aplikację";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Zdalna synchronizacja danych";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensor wygasł";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Sensor Wygasa";
-
 /* Title describing sensor session age */
 "Session Age" = "Wiek sesji";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/pl.lproj/TransmitterManagerSetup.strings

@@ -7,6 +7,12 @@
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "Detail";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "ID nadajnika jest nadrukowany z tyłu urządzenia, z boku opakowania, w którym go dostarczono oraz jest dostępny w menu ustawień odbiornika i w aplikacji mobilnej.";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "ID nadajnika";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.footerTitle" = "Dane można pobrać przez internet z Share, kiedy połączenie nadajnika się nie powiedzie.";
 
@@ -15,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Wprowadź 6-cyfrowy ID nadajnika";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "ID nadajnika jest nadrukowany z tyłu urządzenia, z boku opakowania, w którym go dostarczono oraz jest dostępny w menu ustawień odbiornika i w aplikacji mobilnej.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "ID nadajnika";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/pt-BR.lproj/TransmitterManagerSetup.strings

@@ -7,6 +7,12 @@
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "Detail";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "O ID do transmissor pode ser encontrado impresso na parte traseira do dispositivo, na parte lateral da caixa em que ele veio e nos menus de configurações do receptor e do aplicativo móvel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "ID do Transmissor";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.footerTitle" = "Os dados podem ser baixados pela Internet a partir do compartilhamento quando a conexão do transmissor falhar.";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/ru.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Последняя калибровка";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Последнее подключение";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Последние данные";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Открыть приложение";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Удаленная синхронизация данных";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Сенсор истек";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Сенсор истекает";
-
 /* Title describing sensor session age */
 "Session Age" = "Сенсор отработал";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/ru.lproj/TransmitterManagerSetup.strings

@@ -21,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Введите шестизначный идентификатор трансмиттера";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "Номер трансмиттера находится на обратной стороне устройства, сбоку кпаковочной коробки, в настройках ресивера и мобильного приложения.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "ID трансмиттера";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/sv.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Senaste kalibrering";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Senaste anslutning";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Senaste avläsning";
 
@@ -35,9 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Öppna appen";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Synkronisering av fjärrlagrad data";
-
 /* Title describing sensor session age */
 "Session Age" = "Sessionsålder";
 
@@ -64,4 +58,3 @@ Title text for the button to remove a CGM from Loop */
 
 /* The title text for the upload glucose switch cell */
 "Upload Readings" = "Ladda upp avläsningar";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/sv.lproj/TransmitterManagerSetup.strings

@@ -5,7 +5,7 @@
 "Dds-49-o7G.title" = "Sändarinställning";
 
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
-"GOT-KQ-cEh.text" = "Detail";
+"GOT-KQ-cEh.text" = "Detalj";
 
 /* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
 "Qub-6B-0aB.footerTitle" = "Sändar-ID kan hittas tryckt på baksidan av enheten, på sidan av lådan den kom in samt från inställningsmenyn för mottagaren och mobilappen.";
@@ -21,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "Ange 6-siffrigt sändar-ID";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "Sändar-ID kan hittas tryckt på baksidan av enheten, på sidan av lådan den kom in samt från inställningsmenyn för mottagaren och mobilappen.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Sändari-ID";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/tr.lproj/Localizable.strings

@@ -23,9 +23,6 @@ Title text for the button to remove a CGM from Loop */
 /* Section title for latest glucose calibration */
 "Latest Calibration" = "Son Kalibrasyon";
 
-/* Section title for latest connection date */
-"Latest Connection" = "Son Bağlantı";
-
 /* Section title for latest glucose reading */
 "Latest Reading" = "Son Okuma";
 
@@ -35,15 +32,6 @@ Title text for the button to remove a CGM from Loop */
 /* Button title to open CGM app */
 "Open App" = "Uygulamayı aç";
 
-/* Section title for remote data synchronization */
-"Remote Data Synchronization" = "Uzaktan Veri Senkronizasyonu";
-
-/* Title describing past sensor expiration */
-"Sensor Expired" = "Sensörün Süresi Doldu";
-
-/* Title describing sensor expiration */
-"Sensor Expires" = "Sensörün Süresi Doluyor";
-
 /* Title describing sensor session age */
 "Session Age" = "Sensör Yaşı";
 

Dependencies/CGMBLEKit/CGMBLEKitUI/tr.lproj/TransmitterManagerSetup.strings

@@ -21,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "6 basamaklı verici kimliğini girin";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "Verici kimliğini, cihazın arkasında, geldiği kutunun yan tarafında, alıcının mobil uygulamasının ayarlar menüsünde bulabilirsiniz.";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "Verici Kimliği";
-

Dependencies/CGMBLEKit/CGMBLEKitUI/zh-Hans.lproj/TransmitterManagerSetup.strings

@@ -7,6 +7,12 @@
 /* Class = "UILabel"; text = "Detail"; ObjectID = "GOT-KQ-cEh"; */
 "GOT-KQ-cEh.text" = "详情";
 
+/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.footerTitle" = "发射器编号可在发射器包装盒背面找到，或者可在Dexcom Moblie软件及接受器的“setting”-“Transmitter”中找到";
+
+/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
+"Qub-6B-0aB.headerTitle" = "发射器编号";
+
 /* Class = "UITableViewSection"; footerTitle = "Data can be downloaded over the Internet from Share when the transmitter connection fails."; ObjectID = "k1N-Rg-XDy"; */
 "k1N-Rg-XDy.footerTitle" = "当无法连接发射器时,可通过网络从Dexcom远程下载数据";
 
@@ -15,10 +21,3 @@
 
 /* Class = "UITextField"; placeholder = "Enter the 6-digit transmitter ID"; ObjectID = "nKX-TW-GhD"; */
 "nKX-TW-GhD.placeholder" = "请输入6位发射器编号";
-
-/* Class = "UITableViewSection"; footerTitle = "The transmitter ID can be found printed on the back of the device, on the side of the box it came in, and from within the settings menus of the receiver and mobile app."; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.footerTitle" = "发射器编号可在发射器包装盒背面找到，或者可在Dexcom Moblie软件及接受器的“setting”-“Transmitter”中找到";
-
-/* Class = "UITableViewSection"; headerTitle = "Transmitter ID"; ObjectID = "Qub-6B-0aB"; */
-"Qub-6B-0aB.headerTitle" = "发射器编号";
-

Dependencies/G7SensorKit/it.lproj/Localizable.strings

@@ -2,7 +2,7 @@
 "Dexcom G7" = "Dexcom G7";
 
 /* Descriptive text on G7StartupView */
-"iAPS can read G7 CGM data, but you must still use the Dexcom G7 App for pairing, calibration, and other sensor management." = "iAPS can read G7 CGM data, but you must still use the Dexcom G7 App for pairing, calibration, and other sensor management.";
+"iAPS can read G7 CGM data, but you must still use the Dexcom G7 App for pairing, calibration, and other sensor management." = "iAPS è in grado di leggere i dati CGM di G7, ma è comunque necessario utilizzare l'App Dexcom G7 per l'accoppiamento, la calibrazione e la gestione di altri sensori.";
 
 /* Button title for starting setup */
 "Continue" = "Continua";
@@ -11,43 +11,43 @@
 "Cancel" = "Cancella";
 
 /* Error description for unreliable state */
-"Glucose data is unavailable" = "Glucose data is unavailable";
+"Glucose data is unavailable" = "I dati della glicemia non sono disponibili";
 
 /* The description of sensor algorithm state when sensor is ok. */
-"Sensor is OK" = "Sensor is OK";
+"Sensor is OK" = "Il sensore è OK";
 
 /* The description of sensor algorithm state when sensor is stopped." */
-"Sensor is stopped" = "Sensor is stopped";
+"Sensor is stopped" = "Il sensore è arrestato";
 
 /* The description of sensor algorithm state when sensor is warming up. */
-"Sensor is warming up" = "Sensor is warming up";
+"Sensor is warming up" = "Il sensore è in fase di avvio";
 
 /* The description of sensor algorithm state when sensor is expired. */
-"Sensor expired" = "Sensor expired";
+"Sensor expired" = "Sensore scaduto";
 
 /* The description of sensor algorithm state when sensor failed. */
-"Sensor failed" = "Sensor failed";
+"Sensor failed" = "Sensore fallito";
 
 /* The description of sensor algorithm state when raw value is unknown. (1: missing data details) */
-"Sensor is in unknown state %1$d" = "Sensor is in unknown state %1$d";
+"Sensor is in unknown state %1$d" = "Il Sensore è in un stato %1$d sconosciuto";
 
 /* title for g7 settings row showing sensor start time */
-"Sensor Start" = "Sensor Start";
+"Sensor Start" = "Avvia sensore";
 
 /* title for g7 settings row showing sensor expiration time */
-"Sensor Expiration" = "Sensor Expiration";
+"Sensor Expiration" = "Scadenza Sensore";
 
 /* title for g7 settings row showing sensor grace period end time */
-"Grace Period End" = "Grace Period End";
+"Grace Period End" = "Fine periodo di tolleranza";
 
 /* Field label */
 "Glucose" = "Glucosio";
 
-"Last Reading" = "Last Reading";
+"Last Reading" = "Ultima lettura";
 
 "Time" = "Tempo";
 
-"Trend" = "Trend";
+"Trend" = "Tendenza";
 
 "Bluetooth" = "Bluetooth";
 
@@ -55,7 +55,7 @@
 "Name" = "Nome";
 
 /* title for g7 settings connection status when scanning */
-"Scanning" = "Scanning";
+"Scanning" = "Lettura";
 
 /* title for g7 settings connection status when connected */
 "Connected" = "Collegato";
@@ -64,16 +64,16 @@
 "Connecting" = "In collegamento";
 
 /* title for g7 settings row showing sensor last connect time */
-"Last Connect" = "Last Connect";
+"Last Connect" = "Ultima Connessione";
 
 /* Configuration */
 "Configuration" = "Impostazioni";
 
 /* title for g7 config settings to upload readings */
-"Upload Readings" = "Upload Readings";
+"Upload Readings" = "Carica Letture";
 
 /* Button */
-"Scan for new sensor" = "Scan for new sensor";
+"Scan for new sensor" = "Scansiona per nuovo sensore";
 
 /* Button label for removing CGM */
 "Delete CGM" = "Elimina CGM";
@@ -81,49 +81,49 @@
 /* No glucose value representation (3 dashes for mg/dL) */
 "– – –" = "– – –";
 /* String displayed instead of a glucose value below the CGM range */
-"LOW" = "LOW";
+"LOW" = "BASSO";
 
 /* String displayed instead of a glucose value above the CGM range */
-"HIGH" = "HIGH";
+"HIGH" = "ALTO";
 
 /* Format string for glucose trend per minute. (1: glucose value and unit) */
-"%@/min" = "%@/min";
+"%@/min" = "%@/minuto";
 
 /* G7 Progress bar label when searching for sensor */
-"Searching for sensor" = "Searching for sensor";
+"Searching for sensor" = "Ricerca del sensore in corso";
 
 /* G7 Progress bar label when sensor expired */
-"Sensor expired" = "Sensor expired";
+"Sensor expired" = "Sensore scaduto";
 
 /* G7 Progress bar label when sensor in warmup */
-"Warmup completes" = "Warmup completes";
+"Warmup completes" = "Avvio completato";
 
 /* G7 Progress bar label when sensor in warmup */
-"Warmup completes" = "Warmup completes";
+"Warmup completes" = "Avvio completato";
 
 /* G7 Progress bar label when sensor failed */
-"Sensor failed" = "Sensor failed";
+"Sensor failed" = "Sensore fallito";
 
 /* G7 Progress bar label when sensor lifetime progress showing */
-"Sensor expires" = "Sensor expires";
+"Sensor expires" = "Il sensore scade";
 
 /* G7 Progress bar label when sensor grace period progress showing */
-"Grace period remaining" = "Grace period remaining";
+"Grace period remaining" = "Periodo di tolleranza residuo";
 
 /* G7 Status highlight text for searching for sensor */
-"Searching for\nSensor" = "Searching for\nSensor";
+"Searching for\nSensor" = "Ricerca del sensore \n";
 
 /* G7 Status highlight text for sensor expired */
-"Sensor\nExpired" = "Sensor\nExpired";
+"Sensor\nExpired" = "Sensore \n scaduto";
 
 /* G7 Status highlight text for signal loss */
-"Sensor\nFailed" = "Sensor\nFailed";
+"Sensor\nFailed" = "Sensore \n Fallito";
 
 /* G7 Status highlight text for signal loss */
-"Signal\nLoss" = "Signal\nLoss";
+"Signal\nLoss" = "Perdita segnale \n";
 
 /*G7 Status highlight text for sensor error */
-"Sensor\nIssue" = "Sensor\nIssue";
+"Sensor\nIssue" = "Problema al sensore \n";
 
 /* G7 Status highlight text for sensor warmup */
-"Sensor\nWarmup" = "Sensor\nWarmup";
+"Sensor\nWarmup" = "Riscaldamento sensore \n";

Dependencies/G7SensorKit/nb.lproj/Localizable.strings

@@ -2,7 +2,7 @@
 "Dexcom G7" = "Dexcom G7";
 
 /* Descriptive text on G7StartupView */
-"iAPS can read G7 CGM data, but you must still use the Dexcom G7 App for pairing, calibration, and other sensor management." = "iAPS can read G7 CGM data, but you must still use the Dexcom G7 App for pairing, calibration, and other sensor management.";
+"iAPS can read G7 CGM data, but you must still use the Dexcom G7 App for pairing, calibration, and other sensor management." = "iAPS kan lese data fra Dexcom G7, men du må fremdeles bruke Dexcom G7-appen for å koble til sender, kalibrere og andre innstillinger for sensoren.";
 
 /* Button title for starting setup */
 "Continue" = "Fortsett";
@@ -38,7 +38,7 @@
 "Sensor Expiration" = "Sensor utløper";
 
 /* title for g7 settings row showing sensor grace period end time */
-"Grace Period End" = "Grace Period End";
+"Grace Period End" = "Slutt på utsettelsesperiode";
 
 /* Field label */
 "Glucose" = "Blodsukker";
@@ -55,7 +55,7 @@
 "Name" = "Navn";
 
 /* title for g7 settings connection status when scanning */
-"Scanning" = "Scanning";
+"Scanning" = "Skanner";
 
 /* title for g7 settings connection status when connected */
 "Connected" = "Tilkoblet";
@@ -64,16 +64,16 @@
 "Connecting" = "Kobler til";
 
 /* title for g7 settings row showing sensor last connect time */
-"Last Connect" = "Last Connect";
+"Last Connect" = "Siste tilkobling";
 
 /* Configuration */
 "Configuration" = "Oppsett";
 
 /* title for g7 config settings to upload readings */
-"Upload Readings" = "Upload Readings";
+"Upload Readings" = "Last opp avlesninger";
 
 /* Button */
-"Scan for new sensor" = "Scan for new sensor";
+"Scan for new sensor" = "Søk etter ny sensor";
 
 /* Button label for removing CGM */
 "Delete CGM" = "Slett CGM";
@@ -90,40 +90,40 @@
 "%@/min" = "%@/min";
 
 /* G7 Progress bar label when searching for sensor */
-"Searching for sensor" = "Searching for sensor";
+"Searching for sensor" = "Søker etter sensor";
 
 /* G7 Progress bar label when sensor expired */
 "Sensor expired" = "Sensoren er utløpt";
 
 /* G7 Progress bar label when sensor in warmup */
-"Warmup completes" = "Warmup completes";
+"Warmup completes" = "Oppvarming fullført";
 
 /* G7 Progress bar label when sensor in warmup */
-"Warmup completes" = "Warmup completes";
+"Warmup completes" = "Oppvarming fullført";
 
 /* G7 Progress bar label when sensor failed */
 "Sensor failed" = "Sensoren feilet";
 
 /* G7 Progress bar label when sensor lifetime progress showing */
-"Sensor expires" = "Sensor expires";
+"Sensor expires" = "Sensor utløper";
 
 /* G7 Progress bar label when sensor grace period progress showing */
-"Grace period remaining" = "Grace period remaining";
+"Grace period remaining" = "Utsettelsesperiode som gjenstår";
 
 /* G7 Status highlight text for searching for sensor */
-"Searching for\nSensor" = "Searching for\nSensor";
+"Searching for\nSensor" = "Søker etter\nSensor";
 
 /* G7 Status highlight text for sensor expired */
-"Sensor\nExpired" = "Sensor\nExpired";
+"Sensor\nExpired" = "Sensor\nUtløpt";
 
 /* G7 Status highlight text for signal loss */
-"Sensor\nFailed" = "Sensor\nFailed";
+"Sensor\nFailed" = "Sensor\nFeilet";
 
 /* G7 Status highlight text for signal loss */
-"Signal\nLoss" = "Signal\nLoss";
+"Signal\nLoss" = "Signal\nTapt";
 
 /*G7 Status highlight text for sensor error */
-"Sensor\nIssue" = "Sensor\nIssue";
+"Sensor\nIssue" = "Sensor\nFeil";
 
 /* G7 Status highlight text for sensor warmup */
-"Sensor\nWarmup" = "Sensor\nWarmup";
+"Sensor\nWarmup" = "Sensor\nOppvarming";

Dependencies/MinimedKit/MinimedKit/Resources/it.lproj/Localizable.strings

@@ -17,7 +17,7 @@
 "Bolus in progress" = "Bolo in corso";
 
 /* Suggestions for diagnosing a command refused pump error */
-"Check that the pump is not suspended or priming, or has a percent temp basal type" = "Verificare che il microinfusore non sia sospeso o che stia riavvolgendo o che abbia un tipo basale impostato su percentuale";
+"Check that the pump is not suspended or priming, or has a percent temp basal type" = "Verificare che il microinfusore non sia sospeso o che sia in caricamento o che abbia impostata una basale in percentuale";
 
 /* Pump error code returned when command refused */
 "Command refused" = "Comando negato";
@@ -26,13 +26,13 @@
 "Comms with another pump detected" = "Comunicazione con un altro microinfusore rilevata";
 
 /* Error description */
-"Decoding Error" = "Errore di Decodifica";
+"Decoding Error" = "Errore di decodifica";
 
 /* Error description */
-"Device Error" = "Errore del Dispositivo";
+"Device Error" = "Errore del dispositivo";
 
 /* Describing the pump history insulin data source */
-"Event History" = "Storia degli Eventi";
+"Event History" = "Storico degli eventi";
 
 /* Format string for failure reason. (1: The operation being performed) (2: The response data) */
 "Invalid response during %1$@: %2$@" = "Risposta non valida per %1$@: %2$@";
@@ -47,10 +47,10 @@
 "Max setting exceeded" = "Impostazione massima superata";
 
 /* Pump title (1: model number) */
-"Minimed %@" = "Minimed %@";
+"Minimed %@" = "MiniMed %@";
 
 /* Generic title of the minimed pump manager */
-"Minimed 500/700 Series" = "Minimed serie 500/700";
+"Minimed 500/700 Series" = "MiniMed serie 500/700";
 
 /* Describing the North America pump region */
 "North America" = "Nord America";
@@ -59,16 +59,16 @@
 "Pump did not respond" = "Il microinfusore non risponde";
 
 /* Error description */
-"Pump Error" = "Errore Mincroinfusore";
+"Pump Error" = "Errore microinfusore";
 
 /* No comment provided by engineer. */
 "Pump is suspended" = "Il microinfusore è sospeso";
 
 /* No comment provided by engineer. */
-"Pump responded unexpectedly" = "Il microinfusore ha risposto inaspettatamente";
+"Pump responded unexpectedly" = "Il microinfusore ha risposto in modo inaspettato";
 
 /* The format string describing a pump message. (1: The packet type)(2: The message type)(3: The message address)(4: The message data */
-"PumpMessage(%1$@, %2$@, %3$@, %4$@)" = "PumpMessage(%1$@, %2$@, %3$@, %4$@)";
+"PumpMessage(%1$@, %2$@, %3$@, %4$@)" = "Informazioni pompa(%1$@, %2$@, %3$@, %4$@)";
 
 /* Describing the reservoir insulin data source */
 "Reservoir" = "Serbatoio";
@@ -77,13 +77,13 @@
 "RileyLink radio tune failed" = "Sintonizzazione radio RileyLink fallita";
 
 /* The format string description of a TempBasalPumpEvent. (1: The rate of the temp basal in minutes) */
-"Temporary Basal: %1$.3f U/hour" = "Basale Temporanea: %1$.3f U/ora";
+"Temporary Basal: %1$.3f U/hour" = "Basale temporanea: %1$.3f U/ora";
 
 /* The format string description of a TempBasalDurationPumpEvent. (1: The duration of the temp basal in minutes) */
-"Temporary Basal: %1$d min" = "Basale Temporanea: %1$d min";
+"Temporary Basal: %1$d min" = "Basale temporanea: %1$d min";
 
 /* The format string description of a TempBasalPumpEvent. (1: The rate of the temp basal in percent) */
-"Temporary Basal: %1$d%%" = "Basale Temporanea: %1$d%%";
+"Temporary Basal: %1$d%%" = "Basale temporanea: %1$d%%";
 
 /* The format string description of an unknown pump error code. (1: The specific error code raw value) */
 "Unknown pump error code: %1$@" = "Codice errore microinfusore sconosciuto: %1$@";

Dependencies/MinimedKit/MinimedKit/Resources/nb.lproj/Localizable.strings

@@ -38,7 +38,7 @@
 "Invalid response during %1$@: %2$@" = "Ugyldig respons ved %1$@: %2$@";
 
 /* Describing the battery chemistry as Lithium */
-"Lithium" = "Lithium";
+"Lithium" = "Litium";
 
 /* Recovery suggestion */
 "Make sure your RileyLink is nearby and powered on" = "Pass på at din RileyLink er slått på og er i nærheten";
@@ -95,4 +95,4 @@
 "Unknown response during %1$@: %2$@" = "Ukjent respons ved %1$@: %2$@";
 
 /* Describing the worldwide pump region */
-"World-Wide" = "World-Wide";
+"World-Wide" = "Verdensomspennende";

Dependencies/MinimedKit/MinimedKit/Resources/uk.lproj/Localizable.strings

@@ -44,7 +44,7 @@
 "Make sure your RileyLink is nearby and powered on" = "Впевніться, що RileyLink увімкнений та знаходиться поруч";
 
 /* Pump error code describing max setting exceeded */
-"Max setting exceeded" = "Max setting exceeded";
+"Max setting exceeded" = "Максимальне значення перевищено";
 
 /* Pump title (1: model number) */
 "Minimed %@" = "Minimed %@";
@@ -53,46 +53,46 @@
 "Minimed 500/700 Series" = "Minimed 500/700 Series";
 
 /* Describing the North America pump region */
-"North America" = "North America";
+"North America" = "Північна Америка";
 
 /* No comment provided by engineer. */
-"Pump did not respond" = "Pump did not respond";
+"Pump did not respond" = "Помпа не відповідає";
 
 /* Error description */
-"Pump Error" = "Pump Error";
+"Pump Error" = "Помилка помпи";
 
 /* No comment provided by engineer. */
-"Pump is suspended" = "Pump is suspended";
+"Pump is suspended" = "Помпу призупинено";
 
 /* No comment provided by engineer. */
-"Pump responded unexpectedly" = "Pump responded unexpectedly";
+"Pump responded unexpectedly" = "Несподіваний відгук помпи";
 
 /* The format string describing a pump message. (1: The packet type)(2: The message type)(3: The message address)(4: The message data */
-"PumpMessage(%1$@, %2$@, %3$@, %4$@)" = "PumpMessage(%1$@, %2$@, %3$@, %4$@)";
+"PumpMessage(%1$@, %2$@, %3$@, %4$@)" = "Повідомлення помпи(%1$@, %2$@, %3$@, %4$@)";
 
 /* Describing the reservoir insulin data source */
 "Reservoir" = "Резервуар";
 
 /* Error description */
-"RileyLink radio tune failed" = "RileyLink radio tune failed";
+"RileyLink radio tune failed" = "Налаштування радіозв'язку з RileyLink не вдалося";
 
 /* The format string description of a TempBasalPumpEvent. (1: The rate of the temp basal in minutes) */
-"Temporary Basal: %1$.3f U/hour" = "Temporary Basal: %1$.3f U/hour";
+"Temporary Basal: %1$.3f U/hour" = "Тимчасовий базал: %1$.3f U/год";
 
 /* The format string description of a TempBasalDurationPumpEvent. (1: The duration of the temp basal in minutes) */
-"Temporary Basal: %1$d min" = "Temporary Basal: %1$d min";
+"Temporary Basal: %1$d min" = "Тимчасовий базал: %1$d хв";
 
 /* The format string description of a TempBasalPumpEvent. (1: The rate of the temp basal in percent) */
-"Temporary Basal: %1$d%%" = "Temporary Basal: %1$d%%";
+"Temporary Basal: %1$d%%" = "Тимчасовий базал: %1$d хв%%";
 
 /* The format string description of an unknown pump error code. (1: The specific error code raw value) */
-"Unknown pump error code: %1$@" = "Unknown pump error code: %1$@";
+"Unknown pump error code: %1$@" = "Невідомий код помилки помпи: %1$@";
 
 /* No comment provided by engineer. */
-"Unknown pump model: %@" = "Unknown pump model: %@";
+"Unknown pump model: %@" = "Невідома модель помпи: %@";
 
 /* Format string for an unknown response. (1: The operation being performed) (2: The response data) */
-"Unknown response during %1$@: %2$@" = "Unknown response during %1$@: %2$@";
+"Unknown response during %1$@: %2$@" = "Невідомий відгук %1$@: %2$@";
 
 /* Describing the worldwide pump region */
 "World-Wide" = "World-Wide";

Dependencies/MinimedKit/MinimedKitUI/Resources/da.lproj/Localizable.strings

@@ -129,6 +129,9 @@
    Text for medtronic pump preferred data source */
 "Preferred Data Source" = "Foretruken data kilde";
 
+/* Text for medtronic pump battery percent remaining */
+"Pump Battery Remaining" = "Pump Battery Remaining";
+
 /* navigation title for pump battery type selection
    Text for medtronic pump battery type */
 "Pump Battery Type" = "Pumpe batteritype";
@@ -199,6 +202,9 @@
 /* Units for showing temp basal rate */
 "U/hr" = "E/t";
 
+/* Text to indicate battery percentage is unknown */
+"unknown" = "unknown";
+
 /* Text shown in basal rate space when delivery status is unknown */
 "Unknown" = "Ukendt";
 
@@ -212,4 +218,3 @@
 
 /* Button text to confirm pump time sync */
 "Yes, Sync to Current Time" = "Ja, synkroniser til det aktuelle klokkeslæt";
-

Dependencies/MinimedKit/MinimedKitUI/Resources/es.lproj/Localizable.strings

@@ -129,6 +129,9 @@
    Text for medtronic pump preferred data source */
 "Preferred Data Source" = "Fuente de Datos Preferida";
 
+/* Text for medtronic pump battery percent remaining */
+"Pump Battery Remaining" = "Pump Battery Remaining";
+
 /* navigation title for pump battery type selection
    Text for medtronic pump battery type */
 "Pump Battery Type" = "Tipo de batería de microinfusora";
@@ -199,6 +202,9 @@
 /* Units for showing temp basal rate */
 "U/hr" = "U/hra";
 
+/* Text to indicate battery percentage is unknown */
+"unknown" = "unknown";
+
 /* Text shown in basal rate space when delivery status is unknown */
 "Unknown" = "Desconocido";
 
@@ -212,4 +218,3 @@
 
 /* Button text to confirm pump time sync */
 "Yes, Sync to Current Time" = "Sí, sincronizar con la hora actual";
-

Dependencies/MinimedKit/MinimedKitUI/Resources/fr.lproj/Localizable.strings

@@ -129,6 +129,9 @@
    Text for medtronic pump preferred data source */
 "Preferred Data Source" = "Source de données préférée";
 
+/* Text for medtronic pump battery percent remaining */
+"Pump Battery Remaining" = "Pump Battery Remaining";
+
 /* navigation title for pump battery type selection
    Text for medtronic pump battery type */
 "Pump Battery Type" = "Type de pile dans la pompe";
@@ -199,6 +202,9 @@
 /* Units for showing temp basal rate */
 "U/hr" = "U/h";
 
+/* Text to indicate battery percentage is unknown */
+"unknown" = "unknown";
+
 /* Text shown in basal rate space when delivery status is unknown */
 "Unknown" = "Inconnu";
 
@@ -212,4 +218,3 @@
 
 /* Button text to confirm pump time sync */
 "Yes, Sync to Current Time" = "Oui, synchroniser avec l'heure actuelle";
-

Dependencies/MinimedKit/MinimedKitUI/Resources/it.lproj/Localizable.strings

@@ -129,6 +129,9 @@
    Text for medtronic pump preferred data source */
 "Preferred Data Source" = "Fonte Dati";
 
+/* Text for medtronic pump battery percent remaining */
+"Pump Battery Remaining" = "Pump Battery Remaining";
+
 /* navigation title for pump battery type selection
    Text for medtronic pump battery type */
 "Pump Battery Type" = "Tipo Batteria Microinfusore";
@@ -199,6 +202,9 @@
 /* Units for showing temp basal rate */
 "U/hr" = "U/ora";
 
+/* Text to indicate battery percentage is unknown */
+"unknown" = "unknown";
+
 /* Text shown in basal rate space when delivery status is unknown */
 "Unknown" = "Sconosciuto";
 
@@ -212,4 +218,3 @@
 
 /* Button text to confirm pump time sync */
 "Yes, Sync to Current Time" = "Sì, sincronizza con l'ora corrente";
-

Dependencies/MinimedKit/MinimedKitUI/Resources/nl.lproj/Localizable.strings

@@ -28,9 +28,6 @@
 /* Text to confirm delete this pump */
 "Are you sure you want to delete this Pump?" = "Weet je zeker dat je deze pomp wilt verwijderen?";
 
-/* No comment provided by engineer. */
-"Battery Chemistry" = "Batterij Chemie";
-
 /* The format string describing pump battery voltage: (1: battery voltage) */
 "Battery: %1$@ volts\n" = "Batterij: %1$@ volt\n";
 
@@ -74,9 +71,6 @@
 /* Description for option to not use MySentry */
 "Do not use MySentry" = "Gebruik MySentry niet";
 
-/* No comment provided by engineer. */
-"Done" = "Gereed";
-
 /* The alert title for a resume error */
 "Error Resuming" = "Fout Bij Hervatten";
 
@@ -224,4 +218,3 @@
 
 /* Button text to confirm pump time sync */
 "Yes, Sync to Current Time" = "Ja, Synchroniseer met Huidige Tijd";
-

Dependencies/MinimedKit/MinimedKitUI/Resources/pl.lproj/Localizable.strings

@@ -28,9 +28,6 @@
 /* Text to confirm delete this pump */
 "Are you sure you want to delete this Pump?" = "Czy na pewno chcesz usunąć tę pompę?";
 
-/* No comment provided by engineer. */
-"Battery Chemistry" = "Chemia baterii";
-
 /* The format string describing pump battery voltage: (1: battery voltage) */
 "Battery: %1$@ volts\n" = "Bateria: %1$@ V\n";
 
@@ -74,9 +71,6 @@
 /* Description for option to not use MySentry */
 "Do not use MySentry" = "Nie używaj MySentry";
 
-/* No comment provided by engineer. */
-"Done" = "Gotowe";
-
 /* The alert title for a resume error */
 "Error Resuming" = "Błąd wznawiania";
 
@@ -224,4 +218,3 @@
 
 /* Button text to confirm pump time sync */
 "Yes, Sync to Current Time" = "Tak, zsynchronizuj z bieżącym czasem";
-

Dependencies/MinimedKit/MinimedKitUI/Resources/tr.lproj/Localizable.strings

@@ -129,6 +129,9 @@
    Text for medtronic pump preferred data source */
 "Preferred Data Source" = "Tercih Edilen Veri Kaynağı";
 
+/* Text for medtronic pump battery percent remaining */
+"Pump Battery Remaining" = "Pump Battery Remaining";
+
 /* navigation title for pump battery type selection
    Text for medtronic pump battery type */
 "Pump Battery Type" = "Pompa Pil Tipi";
@@ -199,6 +202,9 @@
 /* Units for showing temp basal rate */
 "U/hr" = "Ü/sa";
 
+/* Text to indicate battery percentage is unknown */
+"unknown" = "unknown";
+
 /* Text shown in basal rate space when delivery status is unknown */
 "Unknown" = "Bilinmeyen";
 
@@ -212,4 +218,3 @@
 
 /* Button text to confirm pump time sync */
 "Yes, Sync to Current Time" = "Evet, Geçerli Saatle Senkronize Et";
-

Dependencies/OmniKit/OmniKit/Resources/it.lproj/Localizable.strings

@@ -191,7 +191,7 @@
 "No Insulin" = "Insulina Terminata";
 
 /* Status highlight that when no pod is paired. */
-"No Pod" = "No Pod";
+"No Pod" = "Nessun Pod";
 
 /* Error message shown when no pod is paired */
 "No pod paired" = "Nessun Pod abbinato";

Dependencies/OmniKit/OmniKitUI/Resources/it.lproj/Localizable.strings

@@ -397,7 +397,7 @@
 
 /* Label for pod life state when no pod paired
    Text shown in insulin remaining space when no pod is paired */
-"No Pod" = "No Pod";
+"No Pod" = "Nessun Pod";
 
 /* Value text for no expiration reminder */
 "No Reminder" = "Nessun promemoria";
@@ -681,7 +681,7 @@
 "The App notifies you when the amount of insulin in the Pod reaches this level." = "L'App puo' avvisare quando la quantità di insulina nel Pod raggiunge un predisposto determinato livello.";
 
 /* Description text for critical alerts */
-"The reminders above will not sound if your device is in Silent or Do Not Disturb mode.\n\nThere are other critical Pod alerts and alarms that will sound even if your device is set to Silent or Do Not Disturb mode." = "The reminders above will not sound if your device is in Silent or Do Not Disturb mode.\n\nThere are other critical Pod alerts and alarms that will sound even if your device is set to Silent or Do Not Disturb mode.";
+"The reminders above will not sound if your device is in Silent or Do Not Disturb mode.\n\nThere are other critical Pod alerts and alarms that will sound even if your device is set to Silent or Do Not Disturb mode." = "I promemoria qui sopra non suoneranno se il dispositivo è in modalità Silenzioso o Non Disturbare.\n\nCi sono altri avvisi e avvisi di Pod critici che suoneranno anche se il dispositivo è impostato in modalità Silenzioso o Non Disturbare.";
 
 /* Message for pod sync time action sheet */
 "The time on your pump is different from the current time. Do you want to update the time on your pump to the current time?" = "l'orario del microinfusore e' diverso da quello del tempo attuale. Vuoi fare un controllo e cambiare l'orario del microinfusore con il tempo attuale?";

Dependencies/rileylink_ios/RileyLinkKitUI/ar.lproj/Localizable.strings

@@ -1,6 +1,106 @@
+/* Unit format string for an RSSI value in decibles */
+"%@ dB" = "%@ dB";
+
+/* Unit format string for an value in percent */
+"%@%%" = "%@%%";
+
+/* The title of the section for alerts */
+"Alert" = "Alert";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Auto";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Battery level";
+
+/* The title of the section describing commands */
+"Commands" = "Commands";
+
+/* The connected state */
+"Connected" = "Connected";
+
+/* The in-progress connecting state */
+"Connecting" = "Connecting";
+
+/* The title of the cell for connection LED */
+"Connection LED" = "Connection LED";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Connection Monitoring";
+
+/* The title of the cell showing BLE connection state */
+"Connection State" = "Connection State";
+
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Connection Vibration";
+
+/* The title of the section describing the device */
+"Device" = "Device";
+
+/* The title of the devices table section in RileyLink settings */
+"Devices" = "Devices";
+
+/* The disconnected state */
+"Disconnected" = "Disconnected";
+
+/* The in-progress disconnecting state */
+"Disconnecting" = "Disconnecting";
+
 /* The title of the cell for sounding device finding piezo */
 "Find Device" = "Find Device";
 
+/* The title of the cell showing firmware version */
+"Firmware" = "Firmware";
+
+/* The title of the cell showing current rileylink frequency */
+"Frequency" = "Frequency";
+
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Get RileyLink Statistics";
+
+/* Progress message for getting statistics. */
+"Get Statistics…" = "Get Statistics…";
+
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Lighten Red LED";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Lighten Yellow LED";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Low Battery Alert";
+
+/* The title of the cell showing device name */
+"Name" = "Name";
+
+/* Detail text when battery alert disabled.
+   Text indicating LED Mode is off */
+"Off" = "Off";
+
 /* Text indicating LED Mode is on */
 "On" = "On";
 
+/* RileyLink setup description */
+"RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink allows for communication with the pump over Bluetooth Low Energy.";
+
+/* The title of the cell showing BLE signal strength (RSSI) */
+"Signal Strength" = "Signal Strength";
+
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Test Commands";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Test Vibration";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Toggle Diagnostic LEDs";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Updating diagnostic LEDs mode";
+
+/* The title of the cell showing uptime */
+"Uptime" = "Uptime";
+
+/* The title of the cell showing ORL */
+"Voltage" = "Voltage";

Dependencies/rileylink_ios/RileyLinkKitUI/ca.lproj/Localizable.strings

@@ -0,0 +1,106 @@
+/* Unit format string for an RSSI value in decibles */
+"%@ dB" = "%@ dB";
+
+/* Unit format string for an value in percent */
+"%@%%" = "%@%%";
+
+/* The title of the section for alerts */
+"Alert" = "Alert";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Auto";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Battery level";
+
+/* The title of the section describing commands */
+"Commands" = "Commands";
+
+/* The connected state */
+"Connected" = "Connected";
+
+/* The in-progress connecting state */
+"Connecting" = "Connecting";
+
+/* The title of the cell for connection LED */
+"Connection LED" = "Connection LED";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Connection Monitoring";
+
+/* The title of the cell showing BLE connection state */
+"Connection State" = "Connection State";
+
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Connection Vibration";
+
+/* The title of the section describing the device */
+"Device" = "Device";
+
+/* The title of the devices table section in RileyLink settings */
+"Devices" = "Devices";
+
+/* The disconnected state */
+"Disconnected" = "Disconnected";
+
+/* The in-progress disconnecting state */
+"Disconnecting" = "Disconnecting";
+
+/* The title of the cell for sounding device finding piezo */
+"Find Device" = "Find Device";
+
+/* The title of the cell showing firmware version */
+"Firmware" = "Firmware";
+
+/* The title of the cell showing current rileylink frequency */
+"Frequency" = "Frequency";
+
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Get RileyLink Statistics";
+
+/* Progress message for getting statistics. */
+"Get Statistics…" = "Get Statistics…";
+
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Lighten Red LED";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Lighten Yellow LED";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Low Battery Alert";
+
+/* The title of the cell showing device name */
+"Name" = "Name";
+
+/* Detail text when battery alert disabled.
+   Text indicating LED Mode is off */
+"Off" = "Off";
+
+/* Text indicating LED Mode is on */
+"On" = "On";
+
+/* RileyLink setup description */
+"RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink allows for communication with the pump over Bluetooth Low Energy.";
+
+/* The title of the cell showing BLE signal strength (RSSI) */
+"Signal Strength" = "Signal Strength";
+
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Test Commands";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Test Vibration";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Toggle Diagnostic LEDs";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Updating diagnostic LEDs mode";
+
+/* The title of the cell showing uptime */
+"Uptime" = "Uptime";
+
+/* The title of the cell showing ORL */
+"Voltage" = "Voltage";

Dependencies/rileylink_ios/RileyLinkKitUI/da.lproj/Localizable.strings

@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Voltage";
-

Dependencies/rileylink_ios/RileyLinkKitUI/de.lproj/Localizable.strings

@@ -8,7 +8,7 @@
 "Alert" = "Alarm";
 
 /* Text indicating LED Mode is auto */
-"Auto" = "Auto";
+"Auto" = "Automatisch";
 
 /* The title of the cell showing battery level */
 "Battery level" = "Batteriefüllung";
@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Spannung";
-

Dependencies/rileylink_ios/RileyLinkKitUI/es.lproj/Localizable.strings

@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Voltaje";
-

Dependencies/rileylink_ios/RileyLinkKitUI/fi.lproj/Localizable.strings

@@ -4,6 +4,15 @@
 /* Unit format string for an value in percent */
 "%@%%" = "%@%%";
 
+/* The title of the section for alerts */
+"Alert" = "Alert";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Auto";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Battery level";
+
 /* The title of the section describing commands */
 "Commands" = "Komennot";
 
@@ -13,9 +22,18 @@
 /* The in-progress connecting state */
 "Connecting" = "Yhdistetään";
 
+/* The title of the cell for connection LED */
+"Connection LED" = "Connection LED";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Connection Monitoring";
+
 /* The title of the cell showing BLE connection state */
 "Connection State" = "Yhteyden tila";
 
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Connection Vibration";
+
 /* The title of the section describing the device */
 "Device" = "Laite";
 
@@ -37,9 +55,21 @@
 /* The title of the cell showing current rileylink frequency */
 "Frequency" = "Taajuus";
 
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Get RileyLink Statistics";
+
 /* Progress message for getting statistics. */
 "Get Statistics…" = "Hae tilastotiedot…";
 
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Lighten Red LED";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Lighten Yellow LED";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Low Battery Alert";
+
 /* The title of the cell showing device name */
 "Name" = "Nimi";
 
@@ -56,6 +86,21 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Signaalin vahvuus";
 
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Test Commands";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Test Vibration";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Toggle Diagnostic LEDs";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Updating diagnostic LEDs mode";
+
 /* The title of the cell showing uptime */
 "Uptime" = "Päällä";
 
+/* The title of the cell showing ORL */
+"Voltage" = "Voltage";

Dependencies/rileylink_ios/RileyLinkKitUI/fr.lproj/Localizable.strings

@@ -50,7 +50,7 @@
 "Find Device" = "Découvrir dispositif";
 
 /* The title of the cell showing firmware version */
-"Firmware" = "Firmware";
+"Firmware" = "Microprogramme";
 
 /* The title of the cell showing current rileylink frequency */
 "Frequency" = "Fréquence";
@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Voltage";
-

Dependencies/rileylink_ios/RileyLinkKitUI/he.lproj/Localizable.strings

@@ -25,6 +25,9 @@
 /* The title of the cell for connection LED */
 "Connection LED" = "נורית חיבור";
 
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Connection Monitoring";
+
 /* The title of the cell showing BLE connection state */
 "Connection State" = "מצב החיבור";
 
@@ -52,6 +55,9 @@
 /* The title of the cell showing current rileylink frequency */
 "Frequency" = "Frequency";
 
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Get RileyLink Statistics";
+
 /* Progress message for getting statistics. */
 "Get Statistics…" = "Get Statistics…";
 
@@ -87,9 +93,14 @@
 /* The title of the cell showing Test Vibration */
 "Test Vibration" = "בדוק רטט";
 
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Toggle Diagnostic LEDs";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Updating diagnostic LEDs mode";
+
 /* The title of the cell showing uptime */
 "Uptime" = "Uptime";
 
 /* The title of the cell showing ORL */
 "Voltage" = "מתח";
-

Dependencies/rileylink_ios/RileyLinkKitUI/it.lproj/Localizable.strings

@@ -84,7 +84,7 @@
 "RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink consente la comunicazione con il microinfusore tramite Bluetooth Low Energy.";
 
 /* The title of the cell showing BLE signal strength (RSSI) */
-"Signal Strength" = "Potenza Segnale";
+"Signal Strength" = "Potenza segnale";
 
 /* The title of the section for orangelink commands
    The title of the section for rileylink commands */
@@ -100,8 +100,7 @@
 "Updating diagnostic LEDs mode" = "Aggiornamento modalità LED diagnostici";
 
 /* The title of the cell showing uptime */
-"Uptime" = "Tempo Attività";
+"Uptime" = "Tempo attività";
 
 /* The title of the cell showing ORL */
 "Voltage" = "Voltaggio";
-

Dependencies/rileylink_ios/RileyLinkKitUI/nb.lproj/Localizable.strings

@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Spenning (V)";
-

Dependencies/rileylink_ios/RileyLinkKitUI/nl.lproj/Localizable.strings

@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Spanning";
-

Dependencies/rileylink_ios/RileyLinkKitUI/pl.lproj/Localizable.strings

@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Napięcie";
-

Dependencies/rileylink_ios/RileyLinkKitUI/pt-BR.lproj/Localizable.strings

@@ -1,6 +1,18 @@
+/* Unit format string for an RSSI value in decibles */
+"%@ dB" = "%@ dB";
+
 /* Unit format string for an value in percent */
 "%@%%" = "%@%%";
 
+/* The title of the section for alerts */
+"Alert" = "Alert";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Auto";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Battery level";
+
 /* The title of the section describing commands */
 "Commands" = "Comandos";
 
@@ -10,9 +22,18 @@
 /* The in-progress connecting state */
 "Connecting" = "Conectando";
 
+/* The title of the cell for connection LED */
+"Connection LED" = "Connection LED";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Connection Monitoring";
+
 /* The title of the cell showing BLE connection state */
 "Connection State" = "Estado da Conexão";
 
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Connection Vibration";
+
 /* The title of the section describing the device */
 "Device" = "Dispositivo";
 
@@ -34,12 +55,28 @@
 /* The title of the cell showing current rileylink frequency */
 "Frequency" = "Frequência";
 
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Get RileyLink Statistics";
+
 /* Progress message for getting statistics. */
 "Get Statistics…" = "Extrair Estatísticas…";
 
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Lighten Red LED";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Lighten Yellow LED";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Low Battery Alert";
+
 /* The title of the cell showing device name */
 "Name" = "Nome";
 
+/* Detail text when battery alert disabled.
+   Text indicating LED Mode is off */
+"Off" = "Off";
+
 /* Text indicating LED Mode is on */
 "On" = "Ligado";
 
@@ -49,6 +86,21 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Potência do Sinal";
 
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Test Commands";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Test Vibration";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Toggle Diagnostic LEDs";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Updating diagnostic LEDs mode";
+
 /* The title of the cell showing uptime */
 "Uptime" = "Tempo de Atividade";
 
+/* The title of the cell showing ORL */
+"Voltage" = "Voltage";

Dependencies/rileylink_ios/RileyLinkKitUI/pt-PT.lproj/Localizable.strings

@@ -0,0 +1,106 @@
+/* Unit format string for an RSSI value in decibles */
+"%@ dB" = "%@ dB";
+
+/* Unit format string for an value in percent */
+"%@%%" = "%@%%";
+
+/* The title of the section for alerts */
+"Alert" = "Alert";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Auto";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Battery level";
+
+/* The title of the section describing commands */
+"Commands" = "Commands";
+
+/* The connected state */
+"Connected" = "Connected";
+
+/* The in-progress connecting state */
+"Connecting" = "Connecting";
+
+/* The title of the cell for connection LED */
+"Connection LED" = "Connection LED";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Connection Monitoring";
+
+/* The title of the cell showing BLE connection state */
+"Connection State" = "Connection State";
+
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Connection Vibration";
+
+/* The title of the section describing the device */
+"Device" = "Device";
+
+/* The title of the devices table section in RileyLink settings */
+"Devices" = "Dispositivos";
+
+/* The disconnected state */
+"Disconnected" = "Disconnected";
+
+/* The in-progress disconnecting state */
+"Disconnecting" = "Disconnecting";
+
+/* The title of the cell for sounding device finding piezo */
+"Find Device" = "Find Device";
+
+/* The title of the cell showing firmware version */
+"Firmware" = "Firmware";
+
+/* The title of the cell showing current rileylink frequency */
+"Frequency" = "Frequency";
+
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Get RileyLink Statistics";
+
+/* Progress message for getting statistics. */
+"Get Statistics…" = "Get Statistics…";
+
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Lighten Red LED";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Lighten Yellow LED";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Low Battery Alert";
+
+/* The title of the cell showing device name */
+"Name" = "Nome";
+
+/* Detail text when battery alert disabled.
+   Text indicating LED Mode is off */
+"Off" = "Off";
+
+/* Text indicating LED Mode is on */
+"On" = "On";
+
+/* RileyLink setup description */
+"RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink allows for communication with the pump over Bluetooth Low Energy.";
+
+/* The title of the cell showing BLE signal strength (RSSI) */
+"Signal Strength" = "Signal Strength";
+
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Test Commands";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Test Vibration";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Toggle Diagnostic LEDs";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Updating diagnostic LEDs mode";
+
+/* The title of the cell showing uptime */
+"Uptime" = "Uptime";
+
+/* The title of the cell showing ORL */
+"Voltage" = "Voltage";

Dependencies/rileylink_ios/RileyLinkKitUI/sk.lproj/Localizable.strings

@@ -99,6 +99,8 @@
 /* Progress message for changing diagnostic LED mode */
 "Updating diagnostic LEDs mode" = "Aktualizuje sa režim diagnostických LED diód";
 
+/* The title of the cell showing uptime */
+"Uptime" = "Uptime";
+
 /* The title of the cell showing ORL */
 "Voltage" = "Napätie";
-

Dependencies/rileylink_ios/RileyLinkKitUI/sv.lproj/Localizable.strings

@@ -4,6 +4,15 @@
 /* Unit format string for an value in percent */
 "%@%%" = "%@%%";
 
+/* The title of the section for alerts */
+"Alert" = "Varning";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Auto";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Batterinivå";
+
 /* The title of the section describing commands */
 "Commands" = "Kommandon";
 
@@ -13,9 +22,18 @@
 /* The in-progress connecting state */
 "Connecting" = "Ansluter";
 
+/* The title of the cell for connection LED */
+"Connection LED" = "Anslutnings-LED";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Anslutningsstatus";
+
 /* The title of the cell showing BLE connection state */
 "Connection State" = "Anslutningsstatus";
 
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Anslutningsvibration";
+
 /* The title of the section describing the device */
 "Device" = "Enhet";
 
@@ -37,9 +55,21 @@
 /* The title of the cell showing current rileylink frequency */
 "Frequency" = "Frekvens";
 
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Hämta RileyLink-statistik";
+
 /* Progress message for getting statistics. */
 "Get Statistics…" = "Hämtar statistik…";
 
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Ljusare röd LED";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Ljusare gul LED";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Låg batterinivå";
+
 /* The title of the cell showing device name */
 "Name" = "Namn";
 
@@ -56,6 +86,21 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Signalstyrka";
 
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Testkommandon";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Testa vibration";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Slå på diagnostiska LED";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Uppdaterar diagnostiska LED";
+
 /* The title of the cell showing uptime */
 "Uptime" = "Körs sedan";
 
+/* The title of the cell showing ORL */
+"Voltage" = "Spänning (V)";

Dependencies/rileylink_ios/RileyLinkKitUI/tr.lproj/Localizable.strings

@@ -104,4 +104,3 @@
 
 /* The title of the cell showing ORL */
 "Voltage" = "Voltaj";
-

Dependencies/rileylink_ios/RileyLinkKitUI/uk.lproj/Localizable.strings

@@ -1,3 +1,18 @@
+/* Unit format string for an RSSI value in decibles */
+"%@ dB" = "%@ dB";
+
+/* Unit format string for an value in percent */
+"%@%%" = "%@%%";
+
+/* The title of the section for alerts */
+"Alert" = "Сповіщення";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Авто";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Рівень заряду";
+
 /* The title of the section describing commands */
 "Commands" = "Команди";
 
@@ -7,9 +22,18 @@
 /* The in-progress connecting state */
 "Connecting" = "Під'єднання";
 
+/* The title of the cell for connection LED */
+"Connection LED" = "Індикатор з’єднання";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Моніторинг з'єднання";
+
 /* The title of the cell showing BLE connection state */
 "Connection State" = "Стан з'єднання";
 
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Вібрація при роз'єднанні";
+
 /* The title of the section describing the device */
 "Device" = "Пристрій";
 
@@ -22,20 +46,61 @@
 /* The in-progress disconnecting state */
 "Disconnecting" = "Від'єднання";
 
+/* The title of the cell for sounding device finding piezo */
+"Find Device" = "Знайти пристрій";
+
 /* The title of the cell showing firmware version */
 "Firmware" = "Прошивка";
 
 /* The title of the cell showing current rileylink frequency */
 "Frequency" = "Частота";
 
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Отримати статистику RileyLink";
+
+/* Progress message for getting statistics. */
+"Get Statistics…" = "Отримати статистику…";
+
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Засвітіть червоний світлодіод";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Засвітіть жовтий світлодіод";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Низький заряд";
+
 /* The title of the cell showing device name */
 "Name" = "Ім’я";
 
+/* Detail text when battery alert disabled.
+   Text indicating LED Mode is off */
+"Off" = "Off";
+
+/* Text indicating LED Mode is on */
+"On" = "On";
+
 /* RileyLink setup description */
 "RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink дозволяє зв'язуватися з насосом через Bluetooth Low Energy.";
 
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Рівень сигналу";
 
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Перевірка команд";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Перевірка вібрації";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Перемкнути діагностичні світлодіоди";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Змінити режим світлодіодів";
+
 /* The title of the cell showing uptime */
 "Uptime" = "Час роботи";
+
+/* The title of the cell showing ORL */
+"Voltage" = "Напруга";

Dependencies/rileylink_ios/RileyLinkKitUI/zh-Hans.lproj/Localizable.strings

@@ -1,3 +1,18 @@
+/* Unit format string for an RSSI value in decibles */
+"%@ dB" = "%@ dB";
+
+/* Unit format string for an value in percent */
+"%@%%" = "%@%%";
+
+/* The title of the section for alerts */
+"Alert" = "Alert";
+
+/* Text indicating LED Mode is auto */
+"Auto" = "Auto";
+
+/* The title of the cell showing battery level */
+"Battery level" = "Battery level";
+
 /* The title of the section describing commands */
 "Commands" = "命令";
 
@@ -7,9 +22,18 @@
 /* The in-progress connecting state */
 "Connecting" = "正在连接";
 
+/* The title of the cell for connection LED */
+"Connection LED" = "Connection LED";
+
+/* The title of the section for connection monitoring */
+"Connection Monitoring" = "Connection Monitoring";
+
 /* The title of the cell showing BLE connection state */
 "Connection State" = "连接状态";
 
+/* The title of the cell for connection vibration */
+"Connection Vibration" = "Connection Vibration";
+
 /* The title of the section describing the device */
 "Device" = "设备";
 
@@ -31,9 +55,28 @@
 /* The title of the cell showing current rileylink frequency */
 "Frequency" = "Frequency";
 
+/* The title of the command to fetch RileyLink statistics */
+"Get RileyLink Statistics" = "Get RileyLink Statistics";
+
+/* Progress message for getting statistics. */
+"Get Statistics…" = "Get Statistics…";
+
+/* The title of the cell showing Lighten Red LED */
+"Lighten Red LED" = "Lighten Red LED";
+
+/* The title of the cell showing Lighten Yellow LED */
+"Lighten Yellow LED" = "Lighten Yellow LED";
+
+/* The title of the cell showing battery level */
+"Low Battery Alert" = "Low Battery Alert";
+
 /* The title of the cell showing device name */
 "Name" = "设备名称";
 
+/* Detail text when battery alert disabled.
+   Text indicating LED Mode is off */
+"Off" = "Off";
+
 /* Text indicating LED Mode is on */
 "On" = "开";
 
@@ -43,6 +86,21 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "信号强度";
 
+/* The title of the section for orangelink commands
+   The title of the section for rileylink commands */
+"Test Commands" = "Test Commands";
+
+/* The title of the cell showing Test Vibration */
+"Test Vibration" = "Test Vibration";
+
+/* The title of the command to update diagnostic LEDs */
+"Toggle Diagnostic LEDs" = "Toggle Diagnostic LEDs";
+
+/* Progress message for changing diagnostic LED mode */
+"Updating diagnostic LEDs mode" = "Updating diagnostic LEDs mode";
+
 /* The title of the cell showing uptime */
 "Uptime" = "Uptime";
 
+/* The title of the cell showing ORL */
+"Voltage" = "Voltage";

FreeAPS/Resources/it.lproj/InfoPlist.strings

@@ -14,7 +14,7 @@
 "NSCalendarsUsageDescription" = "Il calendario è usato per creare nuovi eventi di glicemia.";
 
 /* Privacy - Health Update Usage Description */
-"NSHealthUpdateUsageDescription" = "Health App is used to store blood glucose, insulin and carbohydrates";
+"NSHealthUpdateUsageDescription" = "L'app Salute è usata per memorizzare glicemie, insulina e carboidrati";
 
 /* Privacy - Health Share Usage Description */
-"NSHealthShareUsageDescription" = "Health App is used to store blood glucose, insulin and carbohydrates";
+"NSHealthShareUsageDescription" = "L'app Salute è usata per memorizzare glicemie, insulina e carboidrati";

FreeAPS/Sources/Localizations/Main/nb.lproj/Localizable.strings

@@ -399,40 +399,40 @@ Enact a temp Basal or a temp target */
 "Pump" = "Pumpe";
 
 /* */
-"Watch" = "Watch";
+"Watch" = "Klokke";
 
 /* */
-"Watch Configuration" = "Watch Configuration";
+"Watch Configuration" = "Klokkeinnstillinger";
 
 /* */
 "Apple Watch" = "Apple Watch";
 
 /* */
-"Display on Watch" = "Display on Watch";
+"Display on Watch" = "Vis på klokke";
 
 /* */
 "Garmin Watch" = "Garmin Watch";
 
 /* */
-"Add devices" = "Add devices";
+"Add devices" = "Legg til enheter";
 
 /* */
-"Glucose Target" = "Glucose Target";
+"Glucose Target" = "Blodsukkermål";
 
 /* */
-"Heart Rate" = "Heart Rate";
+"Heart Rate" = "Puls";
 
 /* */
-"Steps" = "Steps";
+"Steps" = "Skritt";
 
 /* */
 "ISF" = "ISF";
 
 /* */
-"The app Garmin Connect must be installed to use for iAPS.\n Go to App Store to download it" = "The app Garmin Connect must be installed to use for iAPS.\n Go to App Store to download it";
+"The app Garmin Connect must be installed to use for iAPS.\n Go to App Store to download it" = "Garmin Connect-appen må være installert.\n Gå til App Store for å laste den ned";
 
 /* */
-"Garmin is not available" = "Garmin is not available";
+"Garmin is not available" = "Garmin er ikke tilgjengelig";
 
 /*  */
 "Services" = "Tjenester";
@@ -1397,7 +1397,7 @@ Enact a temp Basal or a temp target */
 "Display Chart Threshold lines for Low and High" = "Vise grenselinjer for høye og lave verdier";
 
 /* */
-"Standing / Laying TIR Chart" = "Standing / Laying TIR Chart";
+"Standing / Laying TIR Chart" = "Stående / liggende TIR-diagram";
 
 /* */
 "Hours X-Axis (6 default)" = "Timer å vise (6 er standard)";

FreeAPS/Sources/Localizations/Main/ru.lproj/Localizable.strings

@@ -260,7 +260,7 @@ Enact a temp Basal or a temp target */
 /* */
 "Manual Temp Basal" = "Ручная ВБС";
 
-/* Allow uploads data to NS */
+/* Allow uploads tp NS */
 "Allow uploads" = "Разрешить выгрузку";
 
 /* API secret in NS */
@@ -403,7 +403,6 @@ Enact a temp Basal or a temp target */
 
 /* */
 "Watch Configuration" = "Конфигурация часов";
-"Watch" = "Watch";
 
 /* */
 "Apple Watch" = "Apple Watch";

FreeAPS/Sources/Localizations/Main/sv.lproj/Localizable.strings

@@ -1192,39 +1192,6 @@ Enact a temp Basal or a temp target */
 "Delete carb equivalents?" = "Radera dessa poster?";
 
 /* */
-"Currently no Override active" = "Inget undantag aktivt";
-
-/* */
-"Total Insulin Adjustment" = "Total justering av ditt insulinbehov";
-
-/* */
-"Override your Basal, ISF, CR and Target profiles" = "Ändra sparad basal, korrektionsfaktor, insulinkvot and målvärde med ett tillfäligt undantag";
-
-/* */
-"Enable indefinitely" = "Aktivera tillsvidare";
-
-/* */
-"Override Profiles" = "Aktivera tillfälligt undantag";
-
-/* */
-"Override Profile Target" = "Ändra målvärde";
-
-/* */
-"Disable SMBs" = "Stäng av autobolusar (SMBs)";
-
-/* */
-"Your profile basal insulin will be adjusted with the override percentage and your profile ISF and CR will be inversly adjusted with the percentage.\n\nIf you toggle off the override every profile setting will return to normal." = "Your profile basal insulin will be adjusted with the override percentage and your profile ISF and CR will be inversly adjusted with the percentage.\n\nIf you toggle off the override every profile setting will return to normal.";
-
-/* Service Section */
-"App Icons" = "Ikoner";
-
-/* */
-"iAPS Icon" = "iAPS - ikon";
-
-/* Service Section */
-"Statistics and Home View" = "Statistik och Diagram";
-
-/* */
 "Meal Presets" = "Måltider";
 
 /* */
@@ -1387,8 +1354,6 @@ Enact a temp Basal or a temp target */
 /* ----------------------Statistics strings -------------------------------*/
 /* */
 
-/* */
-"Today" = "Idag";
 
 "Today" = "Idag";
 

FreeAPS/Sources/Localizations/Main/uk.lproj/Localizable.strings

@@ -399,40 +399,40 @@ Enact a temp Basal or a temp target */
 "Pump" = "Помпа";
 
 /* */
-"Watch" = "Watch";
+"Watch" = "Годинник";
 
 /* */
-"Watch Configuration" = "Watch Configuration";
+"Watch Configuration" = "Конфігурація годинника";
 
 /* */
 "Apple Watch" = "Apple Watch";
 
 /* */
-"Display on Watch" = "Display on Watch";
+"Display on Watch" = "Відображати на годиннику";
 
 /* */
 "Garmin Watch" = "Garmin Watch";
 
 /* */
-"Add devices" = "Add devices";
+"Add devices" = "Додати пристрій";
 
 /* */
-"Glucose Target" = "Glucose Target";
+"Glucose Target" = "Мета глюкози";
 
 /* */
-"Heart Rate" = "Heart Rate";
+"Heart Rate" = "Пульс";
 
 /* */
-"Steps" = "Steps";
+"Steps" = "Кроки";
 
 /* */
 "ISF" = "ISF";
 
 /* */
-"The app Garmin Connect must be installed to use for iAPS.\n Go to App Store to download it" = "The app Garmin Connect must be installed to use for iAPS.\n Go to App Store to download it";
+"The app Garmin Connect must be installed to use for iAPS.\n Go to App Store to download it" = "Щоб використовувати iAPS, необхідно встановити програму Garmin Connect.\n Перейдіть до App Store, щоб завантажити її";
 
 /* */
-"Garmin is not available" = "Garmin is not available";
+"Garmin is not available" = "Garmin недоступний";
 
 /*  */
 "Services" = "Сервіси";