Pod pairing scene

Dependencies/rileylink_ios/OmniKitUI/ar.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/OmniKitUI/ca.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/OmniKitUI/fi.lproj/OmnipodPumpManager.strings

@@ -10,27 +10,15 @@
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
 "91O-Un-vKc.title" = "Pumpun asennus";
 
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
-"ack-ra-XH6.title" = "Pumpun asennus";
-
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
-"aNg-mm-Uuy.title" = "Pumpun asennus";
-
-/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
-"bJ5-iH-fnF.text" = "Pumppu on valmis käyttöön.";
-
-/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
-"Eng-IY-fQ7.text" = "Loop muistuttaa sinua, ennen kuin pumpun käyttöaika loppuu. Halutessasi voit muuttaa aikaa sinulle sopivaksi.";
-
-/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
-"ePA-6p-q8C.text" = "Muistutus";
-
 /* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.footerTitle" = "HUOM: Älä poista pumpun neulansuojusta vielä tässä vaiheessa.";
 
 /* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.headerTitle" = "Valmistele pumppu";
 
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop muistuttaa sinua, ennen kuin pumpun käyttöaika loppuu. Halutessasi voit muuttaa aikaa sinulle sopivaksi.";
+
 /* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
 "GK7-jb-tyY.text" = "Deaktivoi pumppu. Kun deaktivointi on valmis, irrota pumppu kehosta.";
 
@@ -40,6 +28,18 @@
 /* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
 "Iuv-5M-bDH.text" = "Valmistele infuusiokohta. Poista pumpun neulansuojus ja suojateippi. Jos pumppu on OK, kiinnitä se iholle.";
 
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pumpun asennus";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pumpun asennus";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Pumppu on valmis käyttöön.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Muistutus";
+
 /* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
 "jVO-Ut-MhL.title" = "Yhdistäminen pumppuun";
 
@@ -66,4 +66,3 @@
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Vaihda pumppu";
-

Dependencies/rileylink_ios/OmniKitUI/he.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/OmniKitUI/nb.lproj/OmnipodPumpManager.strings

@@ -1,4 +1,3 @@
-
 /* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
 "1LF-te-Bdd.headerTitle" = "Fjern POD";
 
@@ -49,7 +48,7 @@
 
 /* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
 "kLL-SQ-K0a.text" = "Se over innstillinger under. Disse blir programmert inn i pod ved sammenkobling. Du kan når som helst endre disse på skjermbildet for innstillinger i Loop.";
-    
+
 /* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
 "nDb-R5-e02.title" = "Oppsett ferdig.";
 

Dependencies/rileylink_ios/OmniKitUI/pt-BR.lproj/OmnipodPumpManager.strings

@@ -66,5 +66,3 @@
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Substituir Pod";
-
-

Dependencies/rileylink_ios/OmniKitUI/sk.lproj/OmnipodPumpManager.strings

@@ -4,30 +4,21 @@
 /* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
 "3HH-eJ-lRh.title" = "RileyLink Nastavenie";
 
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
 "91O-Un-vKc.title" = "Nastavenie Pumpy";
 
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
-"ack-ra-XH6.title" = "Nastavenie Pumpy";
-
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
-"aNg-mm-Uuy.title" = "Nastavenie Pumpy";
-
-/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
-"bJ5-iH-fnF.text" = "Váš Pod je pripravený k použitiu.";
-
-/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
-"Eng-IY-fQ7.text" = "Loop vám pripomenie vymeniť váš Pod predtým ako expiruje. Môžete to zmeniť na čas, ktorý vám vyhovuje.";
-
-/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
-"ePA-6p-q8C.text" = "Pripomienka";
-
 /* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.footerTitle" = "POZNÁMKA: Neodstráňujte teraz kryt na ihle Podu.";
 
 /* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.headerTitle" = "Pripravte Pod";
 
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop vám pripomenie vymeniť váš Pod predtým ako expiruje. Môžete to zmeniť na čas, ktorý vám vyhovuje.";
+
 /* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
 "GK7-jb-tyY.text" = "Prosím deaktivujte Pod. Po ukončení deaktivácie, odstráňte Pod z tela.";
 
@@ -37,12 +28,27 @@
 /* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
 "Iuv-5M-bDH.text" = "Pripravte miesto. Odstráňte kryt ihly a kryt náplaste. Ak je Pod vporiadku, aplikujte ho na miesto.";
 
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Nastavenie Pumpy";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Nastavenie Pumpy";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Váš Pod je pripravený k použitiu.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Pripomienka";
+
 /* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
 "jVO-Ut-MhL.title" = "Párovanie Podu";
 
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
 "k1Y-x4-m0a.title" = "Nastavenie Pumpy";
 
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
 /* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
 "nDb-R5-e02.title" = "Nastavenie je dokončené";
 
@@ -55,9 +61,8 @@
 /* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
 "vEc-Km-ewe.text" = "Label";
 
-/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
 "vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Vymeňte Pod";
-

Dependencies/rileylink_ios/OmniKitUI/sv.lproj/OmnipodPumpManager.strings

@@ -62,7 +62,7 @@
 "vEc-Km-ewe.text" = "Titel";
 
 /* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
-"vmF-Dc-3DS.text" = "Fyll din nya podd med insulin. Lyssna efter 2 pip under fyllningen. Placera din RileyLink nära podden under parkopplingen.";
+"vmF-Dc-3DS.text" = "Fyll din nya podd med insulin. Det ska höras 2 pip när podden fyllts med minsta nödvändiga mängd insulin (80 IE). Placera din RileyLink ca 1-2 decimeter från podden under parkopplingen.";
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Byt podd";

Dependencies/rileylink_ios/OmniKitUI/tr.lproj/OmnipodPumpManager.strings

@@ -1,10 +1,12 @@
-
 /* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
 "1LF-te-Bdd.headerTitle" = "Remove POD";
 
 /* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
 "3HH-eJ-lRh.title" = "RileyLink Setup";
 
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
 "91O-Un-vKc.title" = "Pump Setup";
 
@@ -44,6 +46,9 @@
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
 "k1Y-x4-m0a.title" = "Pump Setup";
 
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
 /* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
 "nDb-R5-e02.title" = "Setup Complete";
 
@@ -56,7 +61,7 @@
 /* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
 "vEc-Km-ewe.text" = "Label";
 
-/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
 "vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */

Dependencies/rileylink_ios/OmniKitUI/uk.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

FreeAPS/Sources/Localizations/Main/zh-Hans.lproj/Localizable.strings

@@ -878,12 +878,6 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "大剂量失败或者不准确，请在重复操作前检查胰岛素泵历史";
 
-/* */
-"Bolus failed" = "Bolus failed";
-
-/* */
-"Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
-
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS 主要设置";

crowdin.yml

@@ -32,3 +32,5 @@ files:
     translation: /Dependencies/LoopKit/LoopKit/%osx_locale%.lproj/Localizable.strings
   - source: /Dependencies/LoopKit/LoopKitUI/Base.lproj/Localizable.strings
     translation: /Dependencies/LoopKit/LoopKitUI/%osx_locale%.lproj/Localizable.strings
+  - source: /Dependencies/rileylink_ios/OmniKitUI/en.lproj/OmnipodPumpManager.strings
+    translation: /Dependencies/rileylink_ios/OmniKitUI/%osx_locale%.lproj/OmnipodPumpManager.strings