Crowdin (#158)

* Crowdin

* Pod pairing scene

* Russian and Dutch

* New strings

* Fix snooze description

* Swedish

* Crowdin updates

* more crowdin updates

Co-authored-by: Ivan Valkou <zloyfey@gmail.com>

Dependencies/LoopKit/LoopKit/zh-Hans.lproj/Localizable.strings

@@ -65,7 +65,7 @@
 "No values found" = "未发现数据";
 
 /* Sensor state description for the valid state */
-"OK" = "OK";
+"OK" = "Ok";
 
 /* The error recovery suggestion when Health sharing was denied */
 "Please re-enable sharing in Health" = "请先在Health Kit中允许Loop读写数据";

Dependencies/rileylink_ios/OmniKitUI/ar.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/OmniKitUI/ca.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/OmniKitUI/fi.lproj/OmnipodPumpManager.strings

@@ -10,27 +10,15 @@
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
 "91O-Un-vKc.title" = "Pumpun asennus";
 
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
-"ack-ra-XH6.title" = "Pumpun asennus";
-
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
-"aNg-mm-Uuy.title" = "Pumpun asennus";
-
-/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
-"bJ5-iH-fnF.text" = "Pumppu on valmis käyttöön.";
-
-/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
-"Eng-IY-fQ7.text" = "Loop muistuttaa sinua, ennen kuin pumpun käyttöaika loppuu. Halutessasi voit muuttaa aikaa sinulle sopivaksi.";
-
-/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
-"ePA-6p-q8C.text" = "Muistutus";
-
 /* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.footerTitle" = "HUOM: Älä poista pumpun neulansuojusta vielä tässä vaiheessa.";
 
 /* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.headerTitle" = "Valmistele pumppu";
 
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop muistuttaa sinua, ennen kuin pumpun käyttöaika loppuu. Halutessasi voit muuttaa aikaa sinulle sopivaksi.";
+
 /* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
 "GK7-jb-tyY.text" = "Deaktivoi pumppu. Kun deaktivointi on valmis, irrota pumppu kehosta.";
 
@@ -40,6 +28,18 @@
 /* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
 "Iuv-5M-bDH.text" = "Valmistele infuusiokohta. Poista pumpun neulansuojus ja suojateippi. Jos pumppu on OK, kiinnitä se iholle.";
 
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pumpun asennus";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pumpun asennus";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Pumppu on valmis käyttöön.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Muistutus";
+
 /* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
 "jVO-Ut-MhL.title" = "Yhdistäminen pumppuun";
 
@@ -66,4 +66,3 @@
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Vaihda pumppu";
-

Dependencies/rileylink_ios/OmniKitUI/he.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/OmniKitUI/nb.lproj/OmnipodPumpManager.strings

@@ -1,4 +1,3 @@
-
 /* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
 "1LF-te-Bdd.headerTitle" = "Fjern POD";
 
@@ -49,7 +48,7 @@
 
 /* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
 "kLL-SQ-K0a.text" = "Se over innstillinger under. Disse blir programmert inn i pod ved sammenkobling. Du kan når som helst endre disse på skjermbildet for innstillinger i Loop.";
-    
+
 /* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
 "nDb-R5-e02.title" = "Oppsett ferdig.";
 

Dependencies/rileylink_ios/OmniKitUI/pt-BR.lproj/OmnipodPumpManager.strings

@@ -66,5 +66,3 @@
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Substituir Pod";
-
-

Dependencies/rileylink_ios/OmniKitUI/ru.lproj/OmnipodPumpManager.strings

@@ -41,7 +41,7 @@
 "ePA-6p-q8C.text" = "Напоминание";
 
 /* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
-"jVO-Ut-MhL.title" = "Pod Pairing";
+"jVO-Ut-MhL.title" = "Cопряжение с Pod-ом";
 
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
 "k1Y-x4-m0a.title" = "Настройка помпы";

Dependencies/rileylink_ios/OmniKitUI/sk.lproj/OmnipodPumpManager.strings

@@ -4,30 +4,21 @@
 /* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
 "3HH-eJ-lRh.title" = "RileyLink Nastavenie";
 
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
 "91O-Un-vKc.title" = "Nastavenie Pumpy";
 
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
-"ack-ra-XH6.title" = "Nastavenie Pumpy";
-
-/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
-"aNg-mm-Uuy.title" = "Nastavenie Pumpy";
-
-/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
-"bJ5-iH-fnF.text" = "Váš Pod je pripravený k použitiu.";
-
-/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
-"Eng-IY-fQ7.text" = "Loop vám pripomenie vymeniť váš Pod predtým ako expiruje. Môžete to zmeniť na čas, ktorý vám vyhovuje.";
-
-/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
-"ePA-6p-q8C.text" = "Pripomienka";
-
 /* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.footerTitle" = "POZNÁMKA: Neodstráňujte teraz kryt na ihle Podu.";
 
 /* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
 "EUt-xk-Rmp.headerTitle" = "Pripravte Pod";
 
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop vám pripomenie vymeniť váš Pod predtým ako expiruje. Môžete to zmeniť na čas, ktorý vám vyhovuje.";
+
 /* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
 "GK7-jb-tyY.text" = "Prosím deaktivujte Pod. Po ukončení deaktivácie, odstráňte Pod z tela.";
 
@@ -37,12 +28,27 @@
 /* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
 "Iuv-5M-bDH.text" = "Pripravte miesto. Odstráňte kryt ihly a kryt náplaste. Ak je Pod vporiadku, aplikujte ho na miesto.";
 
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Nastavenie Pumpy";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Nastavenie Pumpy";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Váš Pod je pripravený k použitiu.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Pripomienka";
+
 /* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
 "jVO-Ut-MhL.title" = "Párovanie Podu";
 
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
 "k1Y-x4-m0a.title" = "Nastavenie Pumpy";
 
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
 /* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
 "nDb-R5-e02.title" = "Nastavenie je dokončené";
 
@@ -55,9 +61,8 @@
 /* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
 "vEc-Km-ewe.text" = "Label";
 
-/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
 "vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Vymeňte Pod";
-

Dependencies/rileylink_ios/OmniKitUI/sv.lproj/OmnipodPumpManager.strings

@@ -62,7 +62,7 @@
 "vEc-Km-ewe.text" = "Titel";
 
 /* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
-"vmF-Dc-3DS.text" = "Fyll din nya podd med insulin. Lyssna efter 2 pip under fyllningen. Placera din RileyLink nära podden under parkopplingen.";
+"vmF-Dc-3DS.text" = "Fyll din nya podd med insulin. Det ska höras 2 pip när podden fyllts med minsta nödvändiga mängd insulin (80 IE). Placera din RileyLink ca 1-2 decimeter från podden under parkopplingen.";
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
 "yy1-xf-HdR.title" = "Byt podd";

Dependencies/rileylink_ios/OmniKitUI/tr.lproj/OmnipodPumpManager.strings

@@ -1,10 +1,12 @@
-
 /* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
 "1LF-te-Bdd.headerTitle" = "Remove POD";
 
 /* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
 "3HH-eJ-lRh.title" = "RileyLink Setup";
 
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
 "91O-Un-vKc.title" = "Pump Setup";
 
@@ -44,6 +46,9 @@
 /* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
 "k1Y-x4-m0a.title" = "Pump Setup";
 
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
 /* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
 "nDb-R5-e02.title" = "Setup Complete";
 
@@ -56,7 +61,7 @@
 /* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
 "vEc-Km-ewe.text" = "Label";
 
-/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
 "vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
 
 /* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */

Dependencies/rileylink_ios/OmniKitUI/uk.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,68 @@
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pod Settings"; ObjectID = "6vo-Ov-UpE"; */
+"6vo-Ov-UpE.title" = "Pod Settings";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen."; ObjectID = "kLL-SQ-K0a"; */
+"kLL-SQ-K0a.text" = "Review your settings below. They will be programmed into the pod during pairing. You can change these settings at any time in Loopʼs Settings screen.";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep RileyLink adjacent to the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/OmniKitUI/zh-Hans.lproj/Localizable.strings

@@ -1,5 +1,5 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+"%1$@ units remaining at %2$@" = "在%2$@还剩余%1$@";
 
 /* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
 "%1$@%2$@%3$@" = "%1$@%2$@%3$@";
@@ -15,7 +15,7 @@
 "%@ U (Finished)" = "%@ U (已输注)";
 
 /* Format string for bolus progress. (1: The delivered amount) (2: The programmed amount) (3: the percent progress) */
-"%@ U of %@ U (%@)" = "%1$@ U of %2$@ U (%3$@)";
+"%@ U of %@ U (%@)" = "%1$@ U%2$@ U (%3$@)";
 
 /* Format string for temp basal rate. (1: The localized amount) */
 "%@ U/hour" = "%@ U/小时";
@@ -24,7 +24,7 @@
 "%@%%" = "%@%%";
 
 /* Format string for reservoir reading when above or equal to maximum reading. (1: The localized amount) */
-"%@+ U" = "%@+ U";
+"%@+ U" = "%@ + U";
 
 /* Appends a full-stop to a statement */
 "%@." = "%@.";
@@ -36,7 +36,7 @@
 "Active Time" = "Pod启动时间";
 
 /* The title of the cell showing the Pod Active Clock */
-"Pod Active Clock" = "Pod Active Clock";
+"Pod Active Clock" = "Pod已启用时间";
 
 /* The title of the cell showing alarm status */
 "Alarms" = "提醒";
@@ -72,7 +72,7 @@
 "Configuration" = "配置";
 
 /* The title of the Insulin Type */
-"Insulin Type" = "Insulin Type";
+"Insulin Type" = "胰岛素类型";
 
 /* The title of the continue action in an action sheet */
 "Continue" = "继续";
@@ -106,16 +106,16 @@
 "Error enabling bolus beeps" = "启用大剂量输注中提醒错误";
 
 /* The alert title for enable Confirmation Beeps */
-"Enable Confirmation Beeps" = "Enable Confirmation Beeps";
+"Enable Confirmation Beeps" = "启动命令成功提醒";
 
 /* The alert title for Disable Confirmation Beep */
-"Disable Confirmation Beeps" = "Disable Confirmation Beeps";
+"Disable Confirmation Beeps" = "禁用命令成功提醒";
 
 /* The alert title for enable Automatic Bolus Beeps */
-"Enable Automatic Bolus Beeps" = "Enable Automatic Bolus Beeps";
+"Enable Automatic Bolus Beeps" = "启用自动大剂量成功提醒";
 
 /* The alert title for Disable Automatic Bolus Beeps */
-"Disable Automatic Bolus Beeps" = "Disable Automatic Bolus Beeps";
+"Disable Automatic Bolus Beeps" = "禁用自动大剂量成功提醒";
 
 /* The alert title for a resume error */
 "Error Resuming" = "恢复输注错误";
@@ -136,10 +136,10 @@
 "Fault" = "错误";
 
 /* The title of the command to finish pod setup */
-"Finish pod setup" = "完成设置";
+"Finish pod setup" = "完成Pod设置";
 
 /* Accessibility format string for (1: localized volume)(2: time) */
-"Greater than %1$@ units remaining at %2$@" = "Greater than %1$@ units remaining at %2$@";
+"Greater than %1$@ units remaining at %2$@" = "在%2$@ 还有%1$@ 单位剩余";
 
 /* Instructions when deactivating pod that has been paired, but not attached. */
 "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod." = "Pod设置失败，请解除该从身体移除Pod,然后配对新Pod";
@@ -249,13 +249,13 @@
 "Unknown" = "未知";
 
 /* The title of the diagnostics section in settings */
-"Diagnostics" = "Diagnostics";
+"Diagnostics" = "诊断";
 
 /* The diagnostic command Read Pod Status */
-"Read Pod Status" = "Read Pod Status";
+"Read Pod Status" = "读取Pod状态";
 
 /* The diagnostic command Read Pulse Log */
-"Read Pulse Log" = "Read Pulse Log";
+"Read Pulse Log" = "读取Pulse日志";
 
 /* The title of the pod details section in settings */
-"Pod Details" = "Pod Details";
+"Pod Details" = "Pod详情";

Dependencies/rileylink_ios/RileyLinkKitUI/zh-Hans.lproj/Localizable.strings

@@ -26,7 +26,7 @@
 "Firmware" = "固件";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "频段";
 
 /* The title of the cell showing device name */
 "Name" = "设备名称";
@@ -38,67 +38,67 @@
 "Signal Strength" = "信号强度";
 
 /* The header of the cells showing connection monitoring */
-"Connection Monitoring" = "Connection Monitoring";
+"Connection Monitoring" = "连接状态设置";
 
 /* The title of the cell showing uptime */
 "Uptime" = "Uptime";
 
 /* The title of the cell showing battery level */
-"Battery level" = "Battery level";
+"Battery level" = "电池电量";
 
 /* The title of the cell showing Voltage */
-"Voltage" = "Voltage";
+"Voltage" = "电压";
 
 /* "The title of the section for alerts" */
-"Alert" = "Alert";
+"Alert" = "警报";
 
 /* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "Low Battery Alert";
+"Low Battery Alert" = "电池报警";
 
 /* Header of list showing battery level alert options */
-"Battery level Alert" = "Battery level Alert";
+"Battery level Alert" = "电池电量警报";
 
 /* Battery level alert OFF in list of options */
-"OFF" = "OFF";
+"OFF" = "关闭";
 
 /* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "Diagnostic LEDs";
+"Diagnostic LEDs" = "诊断指示灯";
 
 /* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "Get RileyLink Statistics";
+"Get RileyLink Statistics" = "获取 RileyLink 统计";
 
 /* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "Invert LED Logic";
+"Invert LED Logic" = "反转指示灯逻辑。";
 
 /* The header of the cells showing test commands */
-"Test Commands" = "Test Commands";
+"Test Commands" = "测试命令";
 
 /* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Lighten Yellow LED";
+"Lighten Yellow LED" = "点亮黄色指示灯";
 
 /* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Lighten Red LED";
+"Lighten Red LED" = "点亮红色指示灯";
 
 /* The title of the cell showing Test Vibration */
-"Test Vibration" = "Test Vibration";
+"Test Vibration" = "测试振动";
 
 /* The title of the cell for sounding device finding piezo */
-"Find Device" = "Find Device";
+"Find Device" = "寻找设备";
 
 /* The title of the cell for connection LED */
-"Connection LED" = "Connection LED";
+"Connection LED" = "连接指示灯";
 
 /* The title of the cell for connection vibration */
-"Connection Vibration" = "Connection Vibration";
+"Connection Vibration" = "连接振动";
 
 /* Detail text when battery alert disabled. */
-"Off" = "Off";
+"Off" = "关闭";
 
 /* Text indicating LED Mode is on */
-"On" = "On";
+"On" = "开启";
 
 /* Text indicating LED Mode is off */
-"Off" = "Off";
+"Off" = "关闭";
 
 /* Text indicating LED Mode is auto */
-"Auto" = "Auto";
+"Auto" = "自动";

FreeAPS/Resources/zh-Hans.lproj/InfoPlist.strings

@@ -1,20 +1,20 @@
 /* Privacy - NFC Scan Usage Description */
-"NFCReaderUsageDescription" = "NFC is used to scan Libre sensors.";
+"NFCReaderUsageDescription" = "NFC 用于扫描 Libre 传感器。";
 
 /* Privacy - Bluetooth Always Usage Description */
-"NSBluetoothAlwaysUsageDescription" = "Bluetooth is used to communicate with insulin pump and continuous glucose monitor devices";
+"NSBluetoothAlwaysUsageDescription" = "蓝牙用于与胰岛素泵和连续血糖监测设备进行通信";
 
 /* Privacy - Bluetooth Peripheral Usage Description */
-"NSBluetoothPeripheralUsageDescription" = "Bluetooth is used to communicate with insulin pump and continuous glucose monitor devices";
+"NSBluetoothPeripheralUsageDescription" = "蓝牙用于与胰岛素泵和连续血糖监测设备进行通信";
 
 /* Privacy - Face ID Usage Description */
-"NSFaceIDUsageDescription" = "For authorized acces to bolus";
+"NSFaceIDUsageDescription" = "用于输注胰岛素授权";
 
 /* Privacy - Calendars Usage Description */
-"NSCalendarsUsageDescription" = "Calendar is used to create a new glucose events.";
+"NSCalendarsUsageDescription" = "日历用于创建一个新的葡萄糖事件。";
 
 /* Privacy - Health Update Usage Description */
-"NSHealthUpdateUsageDescription" = "Health App is used to store blood glucose data";
+"NSHealthUpdateUsageDescription" = "健康应用用于存储血糖数据";
 
 /* Privacy - Health Share Usage Description */
-"NSHealthShareUsageDescription" = "Health App is used to store blood glucose data";
+"NSHealthShareUsageDescription" = "健康应用用于存储血糖数据";

FreeAPS/Sources/Localizations/Main/ar.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/ca.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/da.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/de.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus ist fehlgeschlagen oder ungenau. Prüfe den Pumpenverlauf vor einer erneuten Abgabe.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS Haupteinstellungen";

FreeAPS/Sources/Localizations/Main/es.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/fi.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/fr.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/he.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/it.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "Impostazioni principali di OpenAPS";

FreeAPS/Sources/Localizations/Main/nb.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus mislyktes eller var upresis. Kontroller bolus-historikken før du gjentar.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS hovedinnstillinger";

FreeAPS/Sources/Localizations/Main/pl.lproj/Localizable.strings

@@ -880,6 +880,21 @@ Połączono z Nightscout!";
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/pt-BR.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/sk.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

FreeAPS/Sources/Localizations/Main/sv.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Misslyckad eller felaktig bolus. Kontrollera pumpens historik innan du försöker igen.";
 
+/* */
+"Carbs" = "Kolhydrater";
+
+/* */
+"Temp Basal" = "Temporär basal";
+
+/* */
+"Temp Target" = "Tillfälligt målvärde";
+
+/* */
+"Resume" = "Återuppta";
+
+/* */
+"Suspend" = "Pausa";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS huvudsakliga inställningar";

FreeAPS/Sources/Localizations/Main/tr.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus başarısız veya hatalı. Tekrarlamadan önce pompa geçmişini kontrol edin.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS ana ayarları";

FreeAPS/Sources/Localizations/Main/uk.lproj/Localizable.strings

@@ -878,6 +878,21 @@ Enact a temp Basal or a temp target */
 /* */
 "Bolus failed or inaccurate. Check pump history before repeating." = "Bolus failed or inaccurate. Check pump history before repeating.";
 
+/* */
+"Carbs" = "Carbs";
+
+/* */
+"Temp Basal" = "Temp Basal";
+
+/* */
+"Temp Target" = "Temp Target";
+
+/* */
+"Resume" = "Resume";
+
+/* */
+"Suspend" = "Suspend";
+
 
 /* Headers for settings ----------------------- */
 "OpenAPS main settings" = "OpenAPS main settings";

crowdin.yml

@@ -32,3 +32,5 @@ files:
     translation: /Dependencies/LoopKit/LoopKit/%osx_locale%.lproj/Localizable.strings
   - source: /Dependencies/LoopKit/LoopKitUI/Base.lproj/Localizable.strings
     translation: /Dependencies/LoopKit/LoopKitUI/%osx_locale%.lproj/Localizable.strings
+  - source: /Dependencies/rileylink_ios/OmniKitUI/en.lproj/OmnipodPumpManager.strings
+    translation: /Dependencies/rileylink_ios/OmniKitUI/%osx_locale%.lproj/OmnipodPumpManager.strings