Crowdin updates (#480)

Dependencies/LoopKit/LoopKit/ar.lproj/Localizable.strings

@@ -0,0 +1,98 @@
+/* Describes a certain bolus failure (1: size of the bolus in units) */
+"%1$@ U bolus failed" = "%1$@ U bolus failed";
+
+/* Describes an uncertain bolus failure (1: size of the bolus in units) */
+"%1$@ U bolus may not have succeeded" = "%1$@ U bolus may not have succeeded";
+
+/* The error description describing when Health sharing was denied */
+"Authorization Denied" = "Authorization Denied";
+
+/* Recovery instruction for an uncertain bolus failure */
+"Check your pump before retrying" = "Check your pump before retrying";
+
+/* The description of an error returned when attempting to delete a sample not shared by the current app */
+"com.loudnate.CarbKit.deleteCarbEntryUnownedErrorDescription" = "Authorization Denied";
+
+/* The error recovery suggestion when attempting to delete a sample not shared by the current app */
+"com.loudnate.carbKit.sharingDeniedErrorRecoverySuggestion" = "This sample can be deleted from the Health app";
+
+/* Generic pump error description */
+"Communication Failure" = "Communication Failure";
+
+/* Generic pump error description */
+"Connection Failure" = "Connection Failure";
+
+/* Generic pump error description */
+"Device Refused" = "Device Refused";
+
+/* Recovery suggestion for a no data error */
+"Ensure carb data exists for the specified date" = "Ensure carb data exists for the specified date";
+
+/* Glucose trend down */
+"Falling" = "Falling";
+
+/* Glucose trend down-down */
+"Falling fast" = "Falling fast";
+
+/* Glucose trend down-down-down */
+"Falling very fast" = "Falling very fast";
+
+/* Glucose trend flat */
+"Flat" = "Flat";
+
+/* The short unit display string for grams per U */
+"g/U" = "g/U";
+
+/* Generic pump error description */
+"Invalid Configuration" = "Invalid Configuration";
+
+/* Recovery instruction for a certain bolus failure */
+"It is safe to retry" = "It is safe to retry";
+
+/* The short unit display string for milligrams per deciliter per U */
+"mg/dL/U" = "mg/dL/U";
+
+/* The short unit display string for millimoles per liter */
+"mmol/L" = "mmol/L";
+
+/* The short unit display string for millimoles per liter per U */
+"mmol/L/U" = "mmol/L/U";
+
+/* Sensor state description for the non-valid state */
+"Needs Attention" = "Needs Attention";
+
+/* Describes an error for no data found in a CarbStore request */
+"No values found" = "No values found";
+
+/* Sensor state description for the valid state */
+"OK" = "OK";
+
+/* The error recovery suggestion when Health sharing was denied */
+"Please re-enable sharing in Health" = "Please re-enable sharing in Health";
+
+/* Glucose trend up */
+"Rising" = "Rising";
+
+/* Glucose trend up-up */
+"Rising fast" = "Rising fast";
+
+/* Glucose trend up-up-up */
+"Rising very fast" = "Rising very fast";
+
+/* The short unit display string for international units of insulin */
+"U" = "U";
+
+/* The short unit display string for international units of insulin per hour */
+"U/hr" = "U/hr";
+
+/* The long unit display string for a singular international unit of insulin */
+"Unit" = "Unit";
+
+/* The long unit display string for a singular international unit of insulin per hour */
+"Unit/hour" = "Unit/hour";
+
+/* The long unit display string for international units of insulin */
+"Units" = "Units";
+
+/* The long unit display string for international units of insulin per hour */
+"Units/hour" = "Units/hour";

Dependencies/LoopKit/LoopKit/ca.lproj/Localizable.strings

@@ -0,0 +1,98 @@
+/* Describes a certain bolus failure (1: size of the bolus in units) */
+"%1$@ U bolus failed" = "%1$@ U bolus failed";
+
+/* Describes an uncertain bolus failure (1: size of the bolus in units) */
+"%1$@ U bolus may not have succeeded" = "%1$@ U bolus may not have succeeded";
+
+/* The error description describing when Health sharing was denied */
+"Authorization Denied" = "Authorization Denied";
+
+/* Recovery instruction for an uncertain bolus failure */
+"Check your pump before retrying" = "Check your pump before retrying";
+
+/* The description of an error returned when attempting to delete a sample not shared by the current app */
+"com.loudnate.CarbKit.deleteCarbEntryUnownedErrorDescription" = "Authorization Denied";
+
+/* The error recovery suggestion when attempting to delete a sample not shared by the current app */
+"com.loudnate.carbKit.sharingDeniedErrorRecoverySuggestion" = "This sample can be deleted from the Health app";
+
+/* Generic pump error description */
+"Communication Failure" = "Communication Failure";
+
+/* Generic pump error description */
+"Connection Failure" = "Connection Failure";
+
+/* Generic pump error description */
+"Device Refused" = "Device Refused";
+
+/* Recovery suggestion for a no data error */
+"Ensure carb data exists for the specified date" = "Ensure carb data exists for the specified date";
+
+/* Glucose trend down */
+"Falling" = "Falling";
+
+/* Glucose trend down-down */
+"Falling fast" = "Falling fast";
+
+/* Glucose trend down-down-down */
+"Falling very fast" = "Falling very fast";
+
+/* Glucose trend flat */
+"Flat" = "Flat";
+
+/* The short unit display string for grams per U */
+"g/U" = "g/U";
+
+/* Generic pump error description */
+"Invalid Configuration" = "Invalid Configuration";
+
+/* Recovery instruction for a certain bolus failure */
+"It is safe to retry" = "It is safe to retry";
+
+/* The short unit display string for milligrams per deciliter per U */
+"mg/dL/U" = "mg/dL/U";
+
+/* The short unit display string for millimoles per liter */
+"mmol/L" = "mmol/L";
+
+/* The short unit display string for millimoles per liter per U */
+"mmol/L/U" = "mmol/L/U";
+
+/* Sensor state description for the non-valid state */
+"Needs Attention" = "Needs Attention";
+
+/* Describes an error for no data found in a CarbStore request */
+"No values found" = "No values found";
+
+/* Sensor state description for the valid state */
+"OK" = "OK";
+
+/* The error recovery suggestion when Health sharing was denied */
+"Please re-enable sharing in Health" = "Please re-enable sharing in Health";
+
+/* Glucose trend up */
+"Rising" = "Rising";
+
+/* Glucose trend up-up */
+"Rising fast" = "Rising fast";
+
+/* Glucose trend up-up-up */
+"Rising very fast" = "Rising very fast";
+
+/* The short unit display string for international units of insulin */
+"U" = "U";
+
+/* The short unit display string for international units of insulin per hour */
+"U/hr" = "U/hr";
+
+/* The long unit display string for a singular international unit of insulin */
+"Unit" = "Unit";
+
+/* The long unit display string for a singular international unit of insulin per hour */
+"Unit/hour" = "Unit/hour";
+
+/* The long unit display string for international units of insulin */
+"Units" = "Units";
+
+/* The long unit display string for international units of insulin per hour */
+"Units/hour" = "Units/hour";

Dependencies/LoopKit/LoopKit/da.lproj/Localizable.strings

@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "Enheder/time";
-

Dependencies/LoopKit/LoopKit/de.lproj/Localizable.strings

@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "Einheiten/Stunde";
-

Dependencies/LoopKit/LoopKit/es.lproj/Localizable.strings

@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "Unidades/hora";
-

Dependencies/LoopKit/LoopKit/fi.lproj/Localizable.strings

@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "Yksikköä/tunnissa";
-

Dependencies/LoopKit/LoopKit/it.lproj/Localizable.strings

@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "Unità/ora";
-

Dependencies/LoopKit/LoopKit/nb.lproj/Localizable.strings

@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "Enheter/time";
-

Dependencies/LoopKit/LoopKit/pl.lproj/Localizable.strings

@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "Jednostki/godzinę";
-

Dependencies/LoopKit/LoopKit/ru.lproj/Localizable.strings

@@ -41,7 +41,7 @@
 "Flat" = "Стабильно";
 
 /* The short unit display string for grams per U */
-"g/U" = "g/U";
+"g/U" = "г/Eд";
 
 /* Generic pump error description */
 "Invalid Configuration" = "Неверная конфигурация";
@@ -53,7 +53,7 @@
 "mg/dL/U" = "mg/dL/U";
 
 /* The short unit display string for millimoles per liter */
-"mmol/L" = "mmol/L";
+"mmol/L" = "ммоль/л";
 
 /* The short unit display string for millimoles per liter per U */
 "mmol/L/U" = "mmol/L/U";
@@ -65,7 +65,7 @@
 "No values found" = "Данные не найдены";
 
 /* Sensor state description for the valid state */
-"OK" = "OK";
+"OK" = "ОК";
 
 /* The error recovery suggestion when Health sharing was denied */
 "Please re-enable sharing in Health" = "Пожалуйста повторно разрешите совместное использование в разделе Здоровье";

Dependencies/LoopKit/LoopKit/sk.lproj/Localizable.strings

@@ -0,0 +1,98 @@
+/* Describes a certain bolus failure (1: size of the bolus in units) */
+"%1$@ U bolus failed" = "%1$@ U bolus failed";
+
+/* Describes an uncertain bolus failure (1: size of the bolus in units) */
+"%1$@ U bolus may not have succeeded" = "%1$@ U bolus may not have succeeded";
+
+/* The error description describing when Health sharing was denied */
+"Authorization Denied" = "Authorization Denied";
+
+/* Recovery instruction for an uncertain bolus failure */
+"Check your pump before retrying" = "Check your pump before retrying";
+
+/* The description of an error returned when attempting to delete a sample not shared by the current app */
+"com.loudnate.CarbKit.deleteCarbEntryUnownedErrorDescription" = "Authorization Denied";
+
+/* The error recovery suggestion when attempting to delete a sample not shared by the current app */
+"com.loudnate.carbKit.sharingDeniedErrorRecoverySuggestion" = "This sample can be deleted from the Health app";
+
+/* Generic pump error description */
+"Communication Failure" = "Communication Failure";
+
+/* Generic pump error description */
+"Connection Failure" = "Connection Failure";
+
+/* Generic pump error description */
+"Device Refused" = "Device Refused";
+
+/* Recovery suggestion for a no data error */
+"Ensure carb data exists for the specified date" = "Ensure carb data exists for the specified date";
+
+/* Glucose trend down */
+"Falling" = "Falling";
+
+/* Glucose trend down-down */
+"Falling fast" = "Falling fast";
+
+/* Glucose trend down-down-down */
+"Falling very fast" = "Falling very fast";
+
+/* Glucose trend flat */
+"Flat" = "Flat";
+
+/* The short unit display string for grams per U */
+"g/U" = "g/U";
+
+/* Generic pump error description */
+"Invalid Configuration" = "Invalid Configuration";
+
+/* Recovery instruction for a certain bolus failure */
+"It is safe to retry" = "It is safe to retry";
+
+/* The short unit display string for milligrams per deciliter per U */
+"mg/dL/U" = "mg/dL/U";
+
+/* The short unit display string for millimoles per liter */
+"mmol/L" = "mmol/L";
+
+/* The short unit display string for millimoles per liter per U */
+"mmol/L/U" = "mmol/L/U";
+
+/* Sensor state description for the non-valid state */
+"Needs Attention" = "Needs Attention";
+
+/* Describes an error for no data found in a CarbStore request */
+"No values found" = "No values found";
+
+/* Sensor state description for the valid state */
+"OK" = "OK";
+
+/* The error recovery suggestion when Health sharing was denied */
+"Please re-enable sharing in Health" = "Please re-enable sharing in Health";
+
+/* Glucose trend up */
+"Rising" = "Rising";
+
+/* Glucose trend up-up */
+"Rising fast" = "Rising fast";
+
+/* Glucose trend up-up-up */
+"Rising very fast" = "Rising very fast";
+
+/* The short unit display string for international units of insulin */
+"U" = "U";
+
+/* The short unit display string for international units of insulin per hour */
+"U/hr" = "U/hr";
+
+/* The long unit display string for a singular international unit of insulin */
+"Unit" = "Unit";
+
+/* The long unit display string for a singular international unit of insulin per hour */
+"Unit/hour" = "Unit/hour";
+
+/* The long unit display string for international units of insulin */
+"Units" = "Units";
+
+/* The long unit display string for international units of insulin per hour */
+"Units/hour" = "Units/hour";

Dependencies/LoopKit/LoopKit/sv.lproj/Localizable.strings

@@ -53,7 +53,7 @@
 "mg/dL/U" = "mg/dl/E";
 
 /* The short unit display string for millimoles per liter */
-"mmol/L" = "mmol/L";
+"mmol/L" = "mmol/l";
 
 /* The short unit display string for millimoles per liter per U */
 "mmol/L/U" = "mmol/L/E";

Dependencies/LoopKit/LoopKit/tr.lproj/Localizable.strings

@@ -1,98 +1,98 @@
 /* Describes a certain bolus failure (1: size of the bolus in units) */
-"%1$@ U bolus failed" = "%1$@ U bolus failed";
+"%1$@ U bolus failed" = "%1$@ Ü bolus başarısız";
 
 /* Describes an uncertain bolus failure (1: size of the bolus in units) */
-"%1$@ U bolus may not have succeeded" = "%1$@ U bolus may not have succeeded";
+"%1$@ U bolus may not have succeeded" = "%1$@ Ü bolus başarılı olmayabilir";
 
 /* The error description describing when Health sharing was denied */
-"Authorization Denied" = "Authorization Denied";
+"Authorization Denied" = "Yetkilendirme Reddedildi";
 
 /* Recovery instruction for an uncertain bolus failure */
-"Check your pump before retrying" = "Check your pump before retrying";
+"Check your pump before retrying" = "Yeniden denemeden önce pompanızı kontrol edin";
 
 /* The description of an error returned when attempting to delete a sample not shared by the current app */
-"com.loudnate.CarbKit.deleteCarbEntryUnownedErrorDescription" = "Authorization Denied";
+"com.loudnate.CarbKit.deleteCarbEntryUnownedErrorDescription" = "Yetkilendirme Reddedildi";
 
 /* The error recovery suggestion when attempting to delete a sample not shared by the current app */
-"com.loudnate.carbKit.sharingDeniedErrorRecoverySuggestion" = "This sample can be deleted from the Health app";
+"com.loudnate.carbKit.sharingDeniedErrorRecoverySuggestion" = "Bu örnek Health uygulamasından silinebilir";
 
 /* Generic pump error description */
-"Communication Failure" = "Communication Failure";
+"Communication Failure" = "İletişim Hatası";
 
 /* Generic pump error description */
-"Connection Failure" = "Connection Failure";
+"Connection Failure" = "Bağlantı Hatası";
 
 /* Generic pump error description */
-"Device Refused" = "Device Refused";
+"Device Refused" = "Aygıt Reddedildi";
 
 /* Recovery suggestion for a no data error */
-"Ensure carb data exists for the specified date" = "Ensure carb data exists for the specified date";
+"Ensure carb data exists for the specified date" = "Belirtilen tarih için karbonhidrat verilerinin mevcut olduğundan emin olun";
 
 /* Glucose trend down */
-"Falling" = "Falling";
+"Falling" = "Düşmekte";
 
 /* Glucose trend down-down */
-"Falling fast" = "Falling fast";
+"Falling fast" = "Hızlı düşmekte";
 
 /* Glucose trend down-down-down */
-"Falling very fast" = "Falling very fast";
+"Falling very fast" = "Çok hızlı düşmekte";
 
 /* Glucose trend flat */
-"Flat" = "Flat";
+"Flat" = "Değişmeyen";
 
 /* The short unit display string for grams per U */
-"g/U" = "g/U";
+"g/U" = "g/Ü";
 
 /* Generic pump error description */
-"Invalid Configuration" = "Invalid Configuration";
+"Invalid Configuration" = "Geçersiz Yapılandırma";
 
 /* Recovery instruction for a certain bolus failure */
-"It is safe to retry" = "It is safe to retry";
+"It is safe to retry" = "Tekrar denemek güvenlidir";
 
 /* The short unit display string for milligrams per deciliter per U */
-"mg/dL/U" = "mg/dL/U";
+"mg/dL/U" = "mg/dL/Ü";
 
 /* The short unit display string for millimoles per liter */
 "mmol/L" = "mmol/L";
 
 /* The short unit display string for millimoles per liter per U */
-"mmol/L/U" = "mmol/L/U";
+"mmol/L/U" = "mmol/L/Ü";
 
 /* Sensor state description for the non-valid state */
-"Needs Attention" = "Needs Attention";
+"Needs Attention" = "Dikkat Gerekli";
 
 /* Describes an error for no data found in a CarbStore request */
-"No values found" = "No values found";
+"No values found" = "Değer bulunamadı";
 
 /* Sensor state description for the valid state */
-"OK" = "OK";
+"OK" = "Tamam";
 
 /* The error recovery suggestion when Health sharing was denied */
-"Please re-enable sharing in Health" = "Please re-enable sharing in Health";
+"Please re-enable sharing in Health" = "Lütfen Health paylaşımı yeniden etkinleştirin";
 
 /* Glucose trend up */
-"Rising" = "Rising";
+"Rising" = "Yükselmekte";
 
 /* Glucose trend up-up */
-"Rising fast" = "Rising fast";
+"Rising fast" = "Hızlı yükselmekte";
 
 /* Glucose trend up-up-up */
-"Rising very fast" = "Rising very fast";
+"Rising very fast" = "Çok hızlı yükselmekte";
 
 /* The short unit display string for international units of insulin */
-"U" = "U";
+"U" = "Ü";
 
 /* The short unit display string for international units of insulin per hour */
-"U/hr" = "U/hr";
+"U/hr" = "Ü/Sa";
 
 /* The long unit display string for a singular international unit of insulin */
-"Unit" = "Unit";
+"Unit" = "Ünite";
 
 /* The long unit display string for a singular international unit of insulin per hour */
-"Unit/hour" = "Unit/hour";
+"Unit/hour" = "Ünite/saat";
 
 /* The long unit display string for international units of insulin */
-"Units" = "Units";
+"Units" = "Ünite";
 
 /* The long unit display string for international units of insulin per hour */
-"Units/hour" = "Units/hour";
+"Units/hour" = "Ünite/saat";

Dependencies/LoopKit/LoopKit/zh-Hans.lproj/Localizable.strings

@@ -65,7 +65,7 @@
 "No values found" = "未发现数据";
 
 /* Sensor state description for the valid state */
-"OK" = "OK";
+"OK" = "Ok";
 
 /* The error recovery suggestion when Health sharing was denied */
 "Please re-enable sharing in Health" = "请先在Health Kit中允许Loop读写数据";
@@ -96,4 +96,3 @@
 
 /* The long unit display string for international units of insulin per hour */
 "Units/hour" = "单位/小时";
-

Dependencies/LoopKit/LoopKitUI/ar.lproj/Localizable.strings

@@ -0,0 +1,252 @@
+/* The format for an override preset cell. (1: symbol)(2: name)
+   The format for an override symbol and name (1: symbol)(2: name) */
+"%1$@ %2$@" = "%1$@ %2$@";
+
+/* Accessibility format string for (1: localized volume)(2: time) */
+"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+
+/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
+"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
+
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% of normal insulin";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
+
+/* Title of the carb entry absorption time cell */
+"Absorption Time" = "Absorption Time";
+
+/* The title for the override emoji activity section */
+"Activity" = "Activity";
+
+/* Action sheet confirmation message for pump history deletion */
+"Are you sure you want to delete all history entries?" = "Are you sure you want to delete all history entries?";
+
+/* Action sheet confirmation message for reservoir deletion */
+"Are you sure you want to delete all reservoir values?" = "Are you sure you want to delete all reservoir values?";
+
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Add Account";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Delete Account";
+
+/* Describes a percentage decrease in overall insulin needs */
+"Basal, bolus, and correction insulin dose amounts are decreased by %@%%." = "Basal, bolus, and correction insulin dose amounts are decreased by %@%%.";
+
+/* Describes a percentage increase in overall insulin needs */
+"Basal, bolus, and correction insulin dose amounts are increased by %@%%." = "Basal, bolus, and correction insulin dose amounts are increased by %@%%.";
+
+/* Describes a lack of change in overall insulin needs */
+"Basal, bolus, and correction insulin dose amounts are unaffected." = "Basal, bolus, and correction insulin dose amounts are unaffected.";
+
+/* The title of the cancel action in an action sheet */
+"Cancel" = "Cancel";
+
+/* The text for the override cancellation button */
+"Cancel Override" = "Cancel Override";
+
+/* Title text for suspend resume button when temp basal canceling */
+"Canceling Temp Basal" = "Canceling Temp Basal";
+
+/* The title of the view controller to create a new carb entry */
+"Add Carb Entry" = "Add Carb Entry";
+
+/* The title of the view controller to edit an existing carb entry */
+"Edit Carb Entry" = "Edit Carb Entry";
+
+/* Footer text for customizing an override from a preset (1: preset name) */
+"Changes will only apply this time you enable the override. The default settings of %@ will not be affected." = "Changes will only apply this time you enable the override. The default settings of %@ will not be affected.";
+
+/* Carb entry section footer text explaining absorption time */
+"Choose a longer absorption time for larger meals, or those containing fats and proteins. This is only guidance to the algorithm and need not be exact." = "Choose a longer absorption time for larger meals, or those containing fats and proteins. This is only guidance to the algorithm and need not be exact.";
+
+/* The format string describing the date of a COB value. The first format argument is the localized date. */
+"com.loudnate.CarbKit.COBDateLabel" = "at %1$@";
+
+/* The format string describing the starting date of a total value. The first format argument is the localized date. */
+"com.loudnate.CarbKit.totalDateLabel" = "since %1$@";
+
+/* The format string describing the date of an IOB value. The first format argument is the localized date. */
+"com.loudnate.InsulinKit.IOBDateLabel" = "at %1$@";
+
+/* The format string describing the starting date of a total value. The first format argument is the localized date. */
+"com.loudnate.InsulinKit.totalDateLabel" = "since %1$@";
+
+/* The title of the action used to dismiss an error alert */
+"com.loudnate.LoopKit.errorAlertActionTitle" = "OK";
+
+/* The title for the override emoji condition section */
+"Condition" = "Condition";
+
+/* Title of the setup button to continue */
+"Continue" = "Continue";
+
+/* The section footer of correction range schedule */
+"Correction range is the blood glucose range that you would like Loop to correct to." = "Correction range is the blood glucose range that you would like Loop to correct to.";
+
+/* The text for a custom override */
+"Custom" = "Custom";
+
+/* The title for the custom override entry screen */
+"Custom Override" = "Custom Override";
+
+/* Title of the carb entry date picker cell */
+"Date" = "Date";
+
+/* Button title to delete all objects */
+"Delete All" = "Delete All";
+
+/* The text for the override duration setting */
+"Duration" = "Duration";
+
+/* The title for the override editing screen */
+"Edit Override" = "Edit Override";
+
+/* Footer text for editing an active override (1: preset name) */
+"Editing affects only the active override. The default settings of %@ will not be affected." = "Editing affects only the active override. The default settings of %@ will not be affected.";
+
+/* The text for the indefinite override duration setting */
+"Enable Indefinitely" = "Enable Indefinitely";
+
+/* The detail text describing an enabled setting */
+"Enabled" = "Enabled";
+
+/* The placeholder text instructing users how to enter a maximum bolus */
+"Enter a number of units" = "Enter a number of units";
+
+/* The placeholder text instructing users how to enter a maximum basal rate */
+"Enter a rate in units per hour" = "Enter a rate in units per hour";
+
+/* Section title for fast absorbing food */
+"Fast" = "Fast";
+
+/* The description shown on the insulin sensitivity schedule interface. */
+"Insulin sensitivity describes how your blood glucose should respond to a 1 Unit dose of insulin. Smaller values mean more insulin will be given when above target. Values that are too small can cause dangerously low blood glucose." = "Insulin sensitivity describes how your blood glucose should respond to a 1 Unit dose of insulin. Smaller values mean more insulin will be given when above target. Values that are too small can cause dangerously low blood glucose.";
+
+/* Placeholder for maximum value in glucose range */
+"max" = "max";
+
+/* The title text for the maximum basal rate value */
+"Maximum Basal Rate" = "Maximum Basal Rate";
+
+/* The title text for the maximum bolus value */
+"Maximum Bolus" = "Maximum Bolus";
+
+/* Section title for medium absorbing food */
+"Medium" = "Medium";
+
+/* Placeholder for minimum value in glucose range */
+"min" = "min";
+
+/* Alert action title to open error help */
+"More Info" = "More Info";
+
+/* The text for the override preset name setting */
+"Name" = "Name";
+
+/* The title for the new override preset entry screen */
+"New Preset" = "New Preset";
+
+/* Section title for no-carb food
+   The title for override emoji miscellaneous section */
+"Other" = "Other";
+
+/* The title text for the insulin sensitivity scaling setting */
+"Overall Insulin Needs" = "Overall Insulin Needs";
+
+/* The title text for the override presets screen */
+"Override Presets" = "Override Presets";
+
+/* Text directing the user to configure override presets */
+"Override presets can be set up under the 'Configuration' section of the settings screen." = "Override presets can be set up under the 'Configuration' section of the settings screen.";
+
+/* The section title of glucose overrides */
+"Overrides" = "Overrides";
+
+/* Title for the pre-meal override range */
+"Pre-Meal" = "Pre-Meal";
+
+/* The section header text override presets */
+"PRESETS" = "PRESETS";
+
+/* The title of the screen displaying a pump event */
+"Pump Event" = "Pump Event";
+
+/* Title text for button to resume insulin delivery */
+"Resume Delivery" = "Resume Delivery";
+
+/* Title text for button when insulin delivery is in the process of being resumed */
+"Resuming" = "Resuming";
+
+/* The text for the override preset name field placeholder */
+"Running" = "Running";
+
+/* Button text for saving glucose correction range schedule
+   Button text for saving insulin sensitivity schedule */
+"Save" = "Save";
+
+/* The section header text for a scheduled override */
+"SCHEDULED OVERRIDE" = "SCHEDULED OVERRIDE";
+
+/* Section title for slow absorbing food */
+"Slow" = "Slow";
+
+/* The text for the override start time */
+"Start Time" = "Start Time";
+
+/* Title text for suspend resume button when temp basal starting */
+"Starting Temp Basal" = "Starting Temp Basal";
+
+/* Title text for button to suspend insulin delivery */
+"Suspend Delivery" = "Suspend Delivery";
+
+/* Title text for button when insulin delivery is in the process of being stopped */
+"Suspending" = "Suspending";
+
+/* The text for the override preset symbol setting */
+"Symbol" = "Symbol";
+
+/* The empty-state text for a configuration value */
+"Tap to set" = "Tap to set";
+
+/* The text for the override target range setting */
+"Target Range" = "Target Range";
+
+/* The title for the override selection screen */
+"Temporary Override" = "Temporary Override";
+
+/* The default placeholder string for a credential */
+"Required" = "Required";
+
+/* Alert body displayed absorption time greater than max (1: maximum absorption time) */
+"The maximum absorption time is %@" = "The maximum absorption time is %@";
+
+/* Alert body displayed for quantity greater than max (1: maximum quantity in grams) */
+"The maximum allowed amount is %@ grams" = "The maximum allowed amount is %@ grams";
+
+/* The schedule table view header describing the configured time zone difference from the default time zone. The substitution parameters are: (1: time zone name)(2: +/-)(3: time interval) */
+"Times in %1$@%2$@%3$@" = "Times in %1$@%2$@%3$@";
+
+/* The unit string for units per hour */
+"U/hour" = "U/hour";
+
+/* The unit string for units */
+"Units" = "Units";
+
+/* Accessibility value for an unknown value
+   The default title to use when an entry has none */
+"Unknown" = "Unknown";
+
+/* Label indicating validation is occurring */
+"Verifying" = "Verifying";
+
+/* Title of an alert containing a validation warning */
+"Warning" = "Warning";
+
+/* Title for the workout override range */
+"Workout" = "Workout";

Dependencies/LoopKit/LoopKitUI/ca.lproj/Localizable.strings

@@ -0,0 +1,252 @@
+/* The format for an override preset cell. (1: symbol)(2: name)
+   The format for an override symbol and name (1: symbol)(2: name) */
+"%1$@ %2$@" = "%1$@ %2$@";
+
+/* Accessibility format string for (1: localized volume)(2: time) */
+"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+
+/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
+"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
+
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% of normal insulin";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
+
+/* Title of the carb entry absorption time cell */
+"Absorption Time" = "Absorption Time";
+
+/* The title for the override emoji activity section */
+"Activity" = "Activity";
+
+/* Action sheet confirmation message for pump history deletion */
+"Are you sure you want to delete all history entries?" = "Are you sure you want to delete all history entries?";
+
+/* Action sheet confirmation message for reservoir deletion */
+"Are you sure you want to delete all reservoir values?" = "Are you sure you want to delete all reservoir values?";
+
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Add Account";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Delete Account";
+
+/* Describes a percentage decrease in overall insulin needs */
+"Basal, bolus, and correction insulin dose amounts are decreased by %@%%." = "Basal, bolus, and correction insulin dose amounts are decreased by %@%%.";
+
+/* Describes a percentage increase in overall insulin needs */
+"Basal, bolus, and correction insulin dose amounts are increased by %@%%." = "Basal, bolus, and correction insulin dose amounts are increased by %@%%.";
+
+/* Describes a lack of change in overall insulin needs */
+"Basal, bolus, and correction insulin dose amounts are unaffected." = "Basal, bolus, and correction insulin dose amounts are unaffected.";
+
+/* The title of the cancel action in an action sheet */
+"Cancel" = "Cancel";
+
+/* The text for the override cancellation button */
+"Cancel Override" = "Cancel Override";
+
+/* Title text for suspend resume button when temp basal canceling */
+"Canceling Temp Basal" = "Canceling Temp Basal";
+
+/* The title of the view controller to create a new carb entry */
+"Add Carb Entry" = "Add Carb Entry";
+
+/* The title of the view controller to edit an existing carb entry */
+"Edit Carb Entry" = "Edit Carb Entry";
+
+/* Footer text for customizing an override from a preset (1: preset name) */
+"Changes will only apply this time you enable the override. The default settings of %@ will not be affected." = "Changes will only apply this time you enable the override. The default settings of %@ will not be affected.";
+
+/* Carb entry section footer text explaining absorption time */
+"Choose a longer absorption time for larger meals, or those containing fats and proteins. This is only guidance to the algorithm and need not be exact." = "Choose a longer absorption time for larger meals, or those containing fats and proteins. This is only guidance to the algorithm and need not be exact.";
+
+/* The format string describing the date of a COB value. The first format argument is the localized date. */
+"com.loudnate.CarbKit.COBDateLabel" = "at %1$@";
+
+/* The format string describing the starting date of a total value. The first format argument is the localized date. */
+"com.loudnate.CarbKit.totalDateLabel" = "since %1$@";
+
+/* The format string describing the date of an IOB value. The first format argument is the localized date. */
+"com.loudnate.InsulinKit.IOBDateLabel" = "at %1$@";
+
+/* The format string describing the starting date of a total value. The first format argument is the localized date. */
+"com.loudnate.InsulinKit.totalDateLabel" = "since %1$@";
+
+/* The title of the action used to dismiss an error alert */
+"com.loudnate.LoopKit.errorAlertActionTitle" = "OK";
+
+/* The title for the override emoji condition section */
+"Condition" = "Condition";
+
+/* Title of the setup button to continue */
+"Continue" = "Continue";
+
+/* The section footer of correction range schedule */
+"Correction range is the blood glucose range that you would like Loop to correct to." = "Correction range is the blood glucose range that you would like Loop to correct to.";
+
+/* The text for a custom override */
+"Custom" = "Custom";
+
+/* The title for the custom override entry screen */
+"Custom Override" = "Custom Override";
+
+/* Title of the carb entry date picker cell */
+"Date" = "Date";
+
+/* Button title to delete all objects */
+"Delete All" = "Delete All";
+
+/* The text for the override duration setting */
+"Duration" = "Duration";
+
+/* The title for the override editing screen */
+"Edit Override" = "Edit Override";
+
+/* Footer text for editing an active override (1: preset name) */
+"Editing affects only the active override. The default settings of %@ will not be affected." = "Editing affects only the active override. The default settings of %@ will not be affected.";
+
+/* The text for the indefinite override duration setting */
+"Enable Indefinitely" = "Enable Indefinitely";
+
+/* The detail text describing an enabled setting */
+"Enabled" = "Enabled";
+
+/* The placeholder text instructing users how to enter a maximum bolus */
+"Enter a number of units" = "Enter a number of units";
+
+/* The placeholder text instructing users how to enter a maximum basal rate */
+"Enter a rate in units per hour" = "Enter a rate in units per hour";
+
+/* Section title for fast absorbing food */
+"Fast" = "Fast";
+
+/* The description shown on the insulin sensitivity schedule interface. */
+"Insulin sensitivity describes how your blood glucose should respond to a 1 Unit dose of insulin. Smaller values mean more insulin will be given when above target. Values that are too small can cause dangerously low blood glucose." = "Insulin sensitivity describes how your blood glucose should respond to a 1 Unit dose of insulin. Smaller values mean more insulin will be given when above target. Values that are too small can cause dangerously low blood glucose.";
+
+/* Placeholder for maximum value in glucose range */
+"max" = "max";
+
+/* The title text for the maximum basal rate value */
+"Maximum Basal Rate" = "Maximum Basal Rate";
+
+/* The title text for the maximum bolus value */
+"Maximum Bolus" = "Maximum Bolus";
+
+/* Section title for medium absorbing food */
+"Medium" = "Medium";
+
+/* Placeholder for minimum value in glucose range */
+"min" = "min";
+
+/* Alert action title to open error help */
+"More Info" = "More Info";
+
+/* The text for the override preset name setting */
+"Name" = "Name";
+
+/* The title for the new override preset entry screen */
+"New Preset" = "New Preset";
+
+/* Section title for no-carb food
+   The title for override emoji miscellaneous section */
+"Other" = "Other";
+
+/* The title text for the insulin sensitivity scaling setting */
+"Overall Insulin Needs" = "Overall Insulin Needs";
+
+/* The title text for the override presets screen */
+"Override Presets" = "Override Presets";
+
+/* Text directing the user to configure override presets */
+"Override presets can be set up under the 'Configuration' section of the settings screen." = "Override presets can be set up under the 'Configuration' section of the settings screen.";
+
+/* The section title of glucose overrides */
+"Overrides" = "Overrides";
+
+/* Title for the pre-meal override range */
+"Pre-Meal" = "Pre-Meal";
+
+/* The section header text override presets */
+"PRESETS" = "PRESETS";
+
+/* The title of the screen displaying a pump event */
+"Pump Event" = "Pump Event";
+
+/* Title text for button to resume insulin delivery */
+"Resume Delivery" = "Resume Delivery";
+
+/* Title text for button when insulin delivery is in the process of being resumed */
+"Resuming" = "Resuming";
+
+/* The text for the override preset name field placeholder */
+"Running" = "Running";
+
+/* Button text for saving glucose correction range schedule
+   Button text for saving insulin sensitivity schedule */
+"Save" = "Save";
+
+/* The section header text for a scheduled override */
+"SCHEDULED OVERRIDE" = "SCHEDULED OVERRIDE";
+
+/* Section title for slow absorbing food */
+"Slow" = "Slow";
+
+/* The text for the override start time */
+"Start Time" = "Start Time";
+
+/* Title text for suspend resume button when temp basal starting */
+"Starting Temp Basal" = "Starting Temp Basal";
+
+/* Title text for button to suspend insulin delivery */
+"Suspend Delivery" = "Suspend Delivery";
+
+/* Title text for button when insulin delivery is in the process of being stopped */
+"Suspending" = "Suspending";
+
+/* The text for the override preset symbol setting */
+"Symbol" = "Symbol";
+
+/* The empty-state text for a configuration value */
+"Tap to set" = "Tap to set";
+
+/* The text for the override target range setting */
+"Target Range" = "Target Range";
+
+/* The title for the override selection screen */
+"Temporary Override" = "Temporary Override";
+
+/* The default placeholder string for a credential */
+"Required" = "Required";
+
+/* Alert body displayed absorption time greater than max (1: maximum absorption time) */
+"The maximum absorption time is %@" = "The maximum absorption time is %@";
+
+/* Alert body displayed for quantity greater than max (1: maximum quantity in grams) */
+"The maximum allowed amount is %@ grams" = "The maximum allowed amount is %@ grams";
+
+/* The schedule table view header describing the configured time zone difference from the default time zone. The substitution parameters are: (1: time zone name)(2: +/-)(3: time interval) */
+"Times in %1$@%2$@%3$@" = "Times in %1$@%2$@%3$@";
+
+/* The unit string for units per hour */
+"U/hour" = "U/hour";
+
+/* The unit string for units */
+"Units" = "Units";
+
+/* Accessibility value for an unknown value
+   The default title to use when an entry has none */
+"Unknown" = "Unknown";
+
+/* Label indicating validation is occurring */
+"Verifying" = "Verifying";
+
+/* Title of an alert containing a validation warning */
+"Warning" = "Warning";
+
+/* Title for the workout override range */
+"Workout" = "Workout";

Dependencies/LoopKit/LoopKitUI/da.lproj/Localizable.strings

@@ -1,15 +1,3 @@
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
-
-/* The format for an insulin needs percentage. */
-"%@%% of normal insulin" = "%@%% of normal insulin";
-
-/* Format string for reservoir volume. (1: The localized volume) */
-"%@U" = "%@E";
-
-/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
-"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
-
 /* The format for an override preset cell. (1: symbol)(2: name)
    The format for an override symbol and name (1: symbol)(2: name) */
 "%1$@ %2$@" = "%1$@ %2$@";
@@ -17,24 +5,36 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
 "%1$@ units remaining at %2$@" = "%1$@ tilbageværende enheder ved %2$@";
 
+/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
+"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
+
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% of normal insulin";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@E";
+
 /* Title of the carb entry absorption time cell */
 "Absorption Time" = "Absorptionstid";
 
 /* The title for the override emoji activity section */
 "Activity" = "Aktivitet";
 
-/* The title of the button to add the credentials for a service */
-"Add Account" = "Tilføj Konto";
-
-/* The title of the view controller to create a new carb entry */
-"Add Carb Entry" = "Tilføj kulhydrater";
-
 /* Action sheet confirmation message for pump history deletion */
 "Are you sure you want to delete all history entries?" = "Er du sikker på at du vil slette alle gamle indtastninger?";
 
 /* Action sheet confirmation message for reservoir deletion */
 "Are you sure you want to delete all reservoir values?" = "Er du sikker på at du vil slette alle reservoir værdier?";
 
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Tilføj Konto";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Slet Konto";
+
 /* Describes a percentage decrease in overall insulin needs */
 "Basal, bolus, and correction insulin dose amounts are decreased by %@%%." = "Basal-, bolus- og korrektionsinsulindoser er sænket med %@%%.";
 
@@ -53,6 +53,12 @@
 /* Title text for suspend resume button when temp basal canceling */
 "Canceling Temp Basal" = "Annuller Midlertidig Basal";
 
+/* The title of the view controller to create a new carb entry */
+"Add Carb Entry" = "Tilføj kulhydrater";
+
+/* The title of the view controller to edit an existing carb entry */
+"Edit Carb Entry" = "Rediger Kulhydrat Indtag";
+
 /* Footer text for customizing an override from a preset (1: preset name) */
 "Changes will only apply this time you enable the override. The default settings of %@ will not be affected." = "Ændringer gælder kun ved denne overstyring. Standardindstillingerne af %@ bliver ikke påvirket.";
 
@@ -92,18 +98,12 @@
 /* Title of the carb entry date picker cell */
 "Date" = "Date";
 
-/* The title of the button to remove the credentials for a service */
-"Delete Account" = "Slet Konto";
-
 /* Button title to delete all objects */
 "Delete All" = "Slet Alle";
 
 /* The text for the override duration setting */
 "Duration" = "Duration";
 
-/* The title of the view controller to edit an existing carb entry */
-"Edit Carb Entry" = "Rediger Kulhydrat Indtag";
-
 /* The title for the override editing screen */
 "Edit Override" = "Rediger Overstyring";
 
@@ -177,9 +177,6 @@
 /* The title of the screen displaying a pump event */
 "Pump Event" = "Pumpe Hændelse";
 
-/* The default placeholder string for a credential */
-"Required" = "Påkrævet";
-
 /* Title text for button to resume insulin delivery */
 "Resume Delivery" = "Fortsæt Indgivelse";
 
@@ -223,6 +220,9 @@
 /* The title for the override selection screen */
 "Temporary Override" = "Midlertidig Overstyring";
 
+/* The default placeholder string for a credential */
+"Required" = "Påkrævet";
+
 /* Alert body displayed absorption time greater than max (1: maximum absorption time) */
 "The maximum absorption time is %@" = "Den maksimale absorptionstid er %@";
 
@@ -250,4 +250,3 @@
 
 /* Title for the workout override range */
 "Workout" = "Motion";
-

Dependencies/LoopKit/LoopKitUI/es.lproj/Localizable.strings

@@ -1,15 +1,3 @@
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
-
-/* The format for an insulin needs percentage. */
-"%@%% of normal insulin" = "%@%% de insulina normal";
-
-/* Format string for reservoir volume. (1: The localized volume) */
-"%@U" = "%@U";
-
-/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
-"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
-
 /* The format for an override preset cell. (1: symbol)(2: name)
    The format for an override symbol and name (1: symbol)(2: name) */
 "%1$@ %2$@" = "%1$@ %2$@";
@@ -17,24 +5,36 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
 "%1$@ units remaining at %2$@" = "quedan %1$@ unidades a las %2$@";
 
+/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
+"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
+
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% de insulina normal";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
+
 /* Title of the carb entry absorption time cell */
 "Absorption Time" = "Tiempo de Absorción";
 
 /* The title for the override emoji activity section */
 "Activity" = "Actividad";
 
-/* The title of the button to add the credentials for a service */
-"Add Account" = "Agregar Cuenta";
-
-/* The title of the view controller to create a new carb entry */
-"Add Carb Entry" = "Agregar Entrada de Carb";
-
 /* Action sheet confirmation message for pump history deletion */
 "Are you sure you want to delete all history entries?" = "¿Estás seguro de querer eliminar todos las entradas históricas?";
 
 /* Action sheet confirmation message for reservoir deletion */
 "Are you sure you want to delete all reservoir values?" = "¿Estás seguro de querer eliminar todos los datos del reservorio?";
 
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Agregar Cuenta";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Eliminar Cuenta";
+
 /* Describes a percentage decrease in overall insulin needs */
 "Basal, bolus, and correction insulin dose amounts are decreased by %@%%." = "Basal, bolos y cantidades de corrección de insulina serán reducidos de %@%%.";
 
@@ -53,6 +53,12 @@
 /* Title text for suspend resume button when temp basal canceling */
 "Canceling Temp Basal" = "Cancelación de basal temporal";
 
+/* The title of the view controller to create a new carb entry */
+"Add Carb Entry" = "Agregar Entrada de Carb";
+
+/* The title of the view controller to edit an existing carb entry */
+"Edit Carb Entry" = "Editar Entrada de Carb";
+
 /* Footer text for customizing an override from a preset (1: preset name) */
 "Changes will only apply this time you enable the override. The default settings of %@ will not be affected." = "Los cambios sólo se aplicarán cuando habilite la sobreescritura. Los valores por defecto de %@ no seran afectados.";
 
@@ -92,18 +98,12 @@
 /* Title of the carb entry date picker cell */
 "Date" = "Fecha";
 
-/* The title of the button to remove the credentials for a service */
-"Delete Account" = "Eliminar Cuenta";
-
 /* Button title to delete all objects */
 "Delete All" = "Eliminar Todos";
 
 /* The text for the override duration setting */
 "Duration" = "Duración";
 
-/* The title of the view controller to edit an existing carb entry */
-"Edit Carb Entry" = "Editar Entrada de Carb";
-
 /* The title for the override editing screen */
 "Edit Override" = "Editar sobreescritura";
 
@@ -177,9 +177,6 @@
 /* The title of the screen displaying a pump event */
 "Pump Event" = "Evento de microinfusadora";
 
-/* The default placeholder string for a credential */
-"Required" = "Requerido";
-
 /* Title text for button to resume insulin delivery */
 "Resume Delivery" = "Resumir la infusión";
 
@@ -223,6 +220,9 @@
 /* The title for the override selection screen */
 "Temporary Override" = "Sobreescritura temporal";
 
+/* The default placeholder string for a credential */
+"Required" = "Requerido";
+
 /* Alert body displayed absorption time greater than max (1: maximum absorption time) */
 "The maximum absorption time is %@" = "El tiempo máximo de absorción es %@";
 
@@ -250,4 +250,3 @@
 
 /* Title for the workout override range */
 "Workout" = "Ejercicio";
-

Dependencies/LoopKit/LoopKitUI/fi.lproj/Localizable.strings

@@ -1,20 +1,21 @@
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
+/* The format for an override preset cell. (1: symbol)(2: name)
+   The format for an override symbol and name (1: symbol)(2: name) */
+"%1$@ %2$@" = "%1$@ %2$@";
 
 /* Accessibility format string for (1: localized volume)(2: time) */
 "%1$@ units remaining at %2$@" = "%1$@ yksikköä jäljellä %2$@";
 
-/* Format string for reservoir volume. (1: The localized volume) */
-"%@U" = "%@U";
-
 /* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
 "%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
 
-/* The format for an override symbol and name (1: symbol)(2: name) */
-"%1$@ %2$@" = "%1$@ %2$@";
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% norm. insuliinista";
 
-/* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ yksikköä jäljellä klo %2$@";
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
 
 /* Title of the carb entry absorption time cell */
 "Absorption Time" = "Imeytymisaika";
@@ -22,18 +23,18 @@
 /* The title for the override emoji activity section */
 "Activity" = "Liikunta";
 
-/* The title of the button to add the credentials for a service */
-"Add Account" = "Lisää tili";
-
-/* The title of the view controller to create a new carb entry */
-"Add Carb Entry" = "Lisää hiilihydraatteja";
-
 /* Action sheet confirmation message for pump history deletion */
 "Are you sure you want to delete all history entries?" = "Haluatko varmasti poistaa kaikki historiatiedot?";
 
 /* Action sheet confirmation message for reservoir deletion */
 "Are you sure you want to delete all reservoir values?" = "Haluatko varmasti poistaa kaikki säiliön arvot?";
 
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Lisää tili";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Poista tili";
+
 /* Describes a percentage decrease in overall insulin needs */
 "Basal, bolus, and correction insulin dose amounts are decreased by %@%%." = "Basaalin, boluksen ja korjaavan insuliiniannoksen määriä vähennetään %@%%.";
 
@@ -52,6 +53,12 @@
 /* Title text for suspend resume button when temp basal canceling */
 "Canceling Temp Basal" = "Kumotaan tilapäinen basaali";
 
+/* The title of the view controller to create a new carb entry */
+"Add Carb Entry" = "Lisää hiilihydraatteja";
+
+/* The title of the view controller to edit an existing carb entry */
+"Edit Carb Entry" = "Muokkaa hiilihydraatteja";
+
 /* Footer text for customizing an override from a preset (1: preset name) */
 "Changes will only apply this time you enable the override. The default settings of %@ will not be affected." = "Muutokset otetaan käyttöön vain tällä kertaa, kun otat tilapäisasetuksen käyttöön. Alkuperäiset %@-asetukset pysyvät ennallaan.";
 
@@ -91,27 +98,18 @@
 /* Title of the carb entry date picker cell */
 "Date" = "Date";
 
-/* The title of the button to remove the credentials for a service */
-"Delete Account" = "Poista tili";
-
 /* Button title to delete all objects */
 "Delete All" = "Poista kaikki";
 
 /* The text for the override duration setting */
 "Duration" = "Duration";
 
-/* The title of the view controller to edit an existing carb entry */
-"Edit Carb Entry" = "Muokkaa hiilihydraatteja";
-
 /* The title for the override editing screen */
 "Edit Override" = "Muokkaa tilapäisasetusta";
 
 /* Footer text for editing an active override (1: preset name) */
 "Editing affects only the active override. The default settings of %@ will not be affected." = "Muokkaus vaikuttaa vain aktiiviseen tilapäisasetukseen. Alkuperäiset %@-asetukset säilyvät ennallaan.";
 
-/* The button text for enabling a temporary override */
-"Enable" = "Ota käyttöön";
-
 /* The text for the indefinite override duration setting */
 "Enable Indefinitely" = "Ilman aikarajaa";
 
@@ -179,9 +177,6 @@
 /* The title of the screen displaying a pump event */
 "Pump Event" = "Pumpputapahtuma";
 
-/* The default placeholder string for a credential */
-"Required" = "Pakollinen";
-
 /* Title text for button to resume insulin delivery */
 "Resume Delivery" = "Jatka annostelua";
 
@@ -216,9 +211,6 @@
 /* The text for the override preset symbol setting */
 "Symbol" = "Symboli";
 
-/* Text directing the user to configure their first override preset */
-"Tap '+' to create a new override preset." = "Luo uusi tilapäisasetus napauttamalla '+'.";
-
 /* The empty-state text for a configuration value */
 "Tap to set" = "Napauta asettaaksesi";
 
@@ -228,6 +220,9 @@
 /* The title for the override selection screen */
 "Temporary Override" = "Tilapäisasetus";
 
+/* The default placeholder string for a credential */
+"Required" = "Pakollinen";
+
 /* Alert body displayed absorption time greater than max (1: maximum absorption time) */
 "The maximum absorption time is %@" = "Pisin sallittu imeytymisaika on %@";
 
@@ -255,4 +250,3 @@
 
 /* Title for the workout override range */
 "Workout" = "Liikunta";
-

Dependencies/LoopKit/LoopKitUI/fr.lproj/Localizable.strings

@@ -153,7 +153,7 @@
 "New Preset" = "Nouveau préréglage";
 
 /* Section title for no-carb food
-The title for override emoji miscellaneous section */
+   The title for override emoji miscellaneous section */
 "Other" = "Autre";
 
 /* The title text for the insulin sensitivity scaling setting */
@@ -239,7 +239,7 @@ The title for override emoji miscellaneous section */
 "Units" = "Unités";
 
 /* Accessibility value for an unknown value
-The default title to use when an entry has none */
+   The default title to use when an entry has none */
 "Unknown" = "Inconnu";
 
 /* Label indicating validation is occurring */
@@ -250,4 +250,3 @@ The default title to use when an entry has none */
 
 /* Title for the workout override range */
 "Workout" = "Entraînement";
-

Dependencies/LoopKit/LoopKitUI/it.lproj/Localizable.strings

@@ -1,15 +1,3 @@
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
-
-/* The format for an insulin needs percentage. */
-"%@%% of normal insulin" = "%@%% of normal insulin";
-
-/* Format string for reservoir volume. (1: The localized volume) */
-"%@U" = "%@U";
-
-/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
-"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
-
 /* The format for an override preset cell. (1: symbol)(2: name)
    The format for an override symbol and name (1: symbol)(2: name) */
 "%1$@ %2$@" = "%1$@ %2$@";
@@ -17,24 +5,36 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
 "%1$@ units remaining at %2$@" = "%1$@ unità rimanenti alle ore %2$@";
 
+/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
+"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
+
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% of normal insulin";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
+
 /* Title of the carb entry absorption time cell */
 "Absorption Time" = "Tempo di assorbimento";
 
 /* The title for the override emoji activity section */
 "Activity" = "Activity";
 
-/* The title of the button to add the credentials for a service */
-"Add Account" = "Aggiungi Account";
-
-/* The title of the view controller to create a new carb entry */
-"Add Carb Entry" = "Aggiungi carboidrati assunti";
-
 /* Action sheet confirmation message for pump history deletion */
 "Are you sure you want to delete all history entries?" = "Sei sicuro di voler eliminare tutti gli inserimenti storiche?";
 
 /* Action sheet confirmation message for reservoir deletion */
 "Are you sure you want to delete all reservoir values?" = "Sei sicuro di voler eliminare tutti  i valori del serbato?";
 
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Aggiungi Account";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Cancella Account";
+
 /* Describes a percentage decrease in overall insulin needs */
 "Basal, bolus, and correction insulin dose amounts are decreased by %@%%." = "Le dosi basali, di bolo e di correzione dell’insulina sono calate del %@%%.";
 
@@ -53,6 +53,12 @@
 /* Title text for suspend resume button when temp basal canceling */
 "Canceling Temp Basal" = "Annullamento velocità basale temporanea in corso";
 
+/* The title of the view controller to create a new carb entry */
+"Add Carb Entry" = "Aggiungi carboidrati assunti";
+
+/* The title of the view controller to edit an existing carb entry */
+"Edit Carb Entry" = "Modifica carboidrati Assunti";
+
 /* Footer text for customizing an override from a preset (1: preset name) */
 "Changes will only apply this time you enable the override. The default settings of %@ will not be affected." = "Le modifiche saranno applicate solo all’attivazione della regolazione manuale. Le impostazioni predefinite di %@ rimarranno invariate.";
 
@@ -92,18 +98,12 @@
 /* Title of the carb entry date picker cell */
 "Date" = "Data";
 
-/* The title of the button to remove the credentials for a service */
-"Delete Account" = "Cancella Account";
-
 /* Button title to delete all objects */
 "Delete All" = "Elimina tutto";
 
 /* The text for the override duration setting */
 "Duration" = "Durata";
 
-/* The title of the view controller to edit an existing carb entry */
-"Edit Carb Entry" = "Modifica carboidrati Assunti";
-
 /* The title for the override editing screen */
 "Edit Override" = "Modifica regolazione manuale";
 
@@ -177,9 +177,6 @@
 /* The title of the screen displaying a pump event */
 "Pump Event" = "Evento Microinfusore";
 
-/* The default placeholder string for a credential */
-"Required" = "Necessario";
-
 /* Title text for button to resume insulin delivery */
 "Resume Delivery" = "Riprendi erogazione";
 
@@ -223,6 +220,9 @@
 /* The title for the override selection screen */
 "Temporary Override" = "Regolazione manuale temporanea";
 
+/* The default placeholder string for a credential */
+"Required" = "Necessario";
+
 /* Alert body displayed absorption time greater than max (1: maximum absorption time) */
 "The maximum absorption time is %@" = "Il tempo di assorbimento massimo e %@";
 
@@ -250,4 +250,3 @@
 
 /* Title for the workout override range */
 "Workout" = "Allenarsi";
-

Dependencies/LoopKit/LoopKitUI/nb.lproj/Localizable.strings

@@ -1,15 +1,3 @@
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
-
-/* The format for an insulin needs percentage. */
-"%@%% of normal insulin" = "%@%% av normalt insulin";
-
-/* Format string for reservoir volume. (1: The localized volume) */
-"%@U" = "%@E";
-
-/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
-"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
-
 /* The format for an override preset cell. (1: symbol)(2: name)
    The format for an override symbol and name (1: symbol)(2: name) */
 "%1$@ %2$@" = "%1$@ %2$@";
@@ -17,6 +5,18 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
 "%1$@ units remaining at %2$@" = "%1$@ enheter gjennstår klokken %2$@";
 
+/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
+"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
+
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% av normalt insulin";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@E";
+
 /* Title of the carb entry absorption time cell */
 "Absorption Time" = "Absorbsjonstid";
 
@@ -129,7 +129,7 @@
 "Insulin sensitivity describes how your blood glucose should respond to a 1 Unit dose of insulin. Smaller values mean more insulin will be given when above target. Values that are too small can cause dangerously low blood glucose." = "Insulinfølsomhet beskriver hvordan blodsukkeret responderer på 1 enhet insulin. Mindre verdier betyr at mer insulin vil bli gitt når man er over målområdet. Verdier som er for små kan føre til farlig lavt blodsukker. ";
 
 /* Placeholder for maximum value in glucose range */
-"max" = "max";
+"max" = "maks";
 
 /* The title text for the maximum basal rate value */
 "Maximum Basal Rate" = "Maks basalgrense";
@@ -138,7 +138,7 @@
 "Maximum Bolus" = "Maks bolus";
 
 /* Section title for medium absorbing food */
-"Medium" = "Medium";
+"Medium" = "Middels";
 
 /* Placeholder for minimum value in glucose range */
 "min" = "min";
@@ -250,4 +250,3 @@
 
 /* Title for the workout override range */
 "Workout" = "Trening";
-

Dependencies/LoopKit/LoopKitUI/nl.lproj/Localizable.strings

@@ -153,7 +153,7 @@
 "New Preset" = "Nieuw tijdelijk programma";
 
 /* Section title for no-carb food
-The title for override emoji miscellaneous section */
+   The title for override emoji miscellaneous section */
 "Other" = "Anders";
 
 /* The title text for the insulin sensitivity scaling setting */
@@ -239,7 +239,7 @@ The title for override emoji miscellaneous section */
 "Units" = "Eenheden";
 
 /* Accessibility value for an unknown value
-The default title to use when an entry has none */
+   The default title to use when an entry has none */
 "Unknown" = "Onbekend";
 
 /* Label indicating validation is occurring */
@@ -250,4 +250,3 @@ The default title to use when an entry has none */
 
 /* Title for the workout override range */
 "Workout" = "Training";
-

Dependencies/LoopKit/LoopKitUI/pl.lproj/Localizable.strings

@@ -1,5 +1,6 @@
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
+/* The format for an override preset cell. (1: symbol)(2: name)
+   The format for an override symbol and name (1: symbol)(2: name) */
+"%1$@ %2$@" = "%1$@ %2$@";
 
 /* Accessibility format string for (1: localized volume)(2: time) */
 "%1$@ units remaining at %2$@" = "%1$@ jednostek pozostaje w %2$@";
@@ -10,36 +11,30 @@
 /* The format for an insulin needs percentage. */
 "%@%% of normal insulin" = "%@%% normalnej insuliny";
 
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
 /* Format string for reservoir volume. (1: The localized volume) */
 "%@U" = "%@J";
 
-/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
-"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
-
-/* The format for an override symbol and name (1: symbol)(2: name) */
-"%1$@ %2$@" = "%1$@ %2$@";
-
-/* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ jednostek pozostających w %2$@";
-
 /* Title of the carb entry absorption time cell */
 "Absorption Time" = "Czas absorpcji";
 
 /* The title for the override emoji activity section */
 "Activity" = "Aktywność";
 
-/* The title of the button to add the credentials for a service */
-"Add Account" = "Dodaj konto";
-
-/* The title of the view controller to create a new carb entry */
-"Add Carb Entry" = "Wprowadź węglowodany";
-
 /* Action sheet confirmation message for pump history deletion */
 "Are you sure you want to delete all history entries?" = "Czy jesteś pewien, że chcesz usunąć z Loop wszystkie dane historyczne pompy?";
 
 /* Action sheet confirmation message for reservoir deletion */
 "Are you sure you want to delete all reservoir values?" = "Czy jesteś pewien, że chcesz usunąć wszystkie wartości zbiornika?";
 
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Dodaj konto";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Usuń konto";
+
 /* Describes a percentage decrease in overall insulin needs */
 "Basal, bolus, and correction insulin dose amounts are decreased by %@%%." = "Dawka podstawowa, bolus i korygująca dawka insuliny zostały zmniejszone o %@%%.";
 
@@ -58,6 +53,12 @@
 /* Title text for suspend resume button when temp basal canceling */
 "Canceling Temp Basal" = "Anulowanie tymczasowej dawki podstawowej";
 
+/* The title of the view controller to create a new carb entry */
+"Add Carb Entry" = "Wprowadź węglowodany";
+
+/* The title of the view controller to edit an existing carb entry */
+"Edit Carb Entry" = "Edytuj wprowadzone węglowodany";
+
 /* Footer text for customizing an override from a preset (1: preset name) */
 "Changes will only apply this time you enable the override. The default settings of %@ will not be affected." = "Zmiany będą obowiązywać wyłącznie podczas tego pominięcia. Domyślne ustawienia %@ nie zostaną zmienione.";
 
@@ -97,18 +98,12 @@
 /* Title of the carb entry date picker cell */
 "Date" = "Data";
 
-/* The title of the button to remove the credentials for a service */
-"Delete Account" = "Usuń konto";
-
 /* Button title to delete all objects */
 "Delete All" = "Usuń wszystko";
 
 /* The text for the override duration setting */
 "Duration" = "Czas trwania";
 
-/* The title of the view controller to edit an existing carb entry */
-"Edit Carb Entry" = "Edytuj wprowadzone węglowodany";
-
 /* The title for the override editing screen */
 "Edit Override" = "Edytuj pominięcie";
 
@@ -182,9 +177,6 @@
 /* The title of the screen displaying a pump event */
 "Pump Event" = "Zdarzenie pompy";
 
-/* The default placeholder string for a credential */
-"Required" = "Wymagane";
-
 /* Title text for button to resume insulin delivery */
 "Resume Delivery" = "Wznów podawanie";
 
@@ -228,6 +220,9 @@
 /* The title for the override selection screen */
 "Temporary Override" = "Pominięcie tymczasowe";
 
+/* The default placeholder string for a credential */
+"Required" = "Wymagane";
+
 /* Alert body displayed absorption time greater than max (1: maximum absorption time) */
 "The maximum absorption time is %@" = "Maksymalny czas absorpcji wynosi %@";
 
@@ -255,4 +250,3 @@
 
 /* Title for the workout override range */
 "Workout" = "Wysiłek fizyczny";
-

Dependencies/LoopKit/LoopKitUI/ru.lproj/Localizable.strings

@@ -78,7 +78,7 @@
 "com.loudnate.InsulinKit.totalDateLabel" = "после %1$@";
 
 /* The title of the action used to dismiss an error alert */
-"com.loudnate.LoopKit.errorAlertActionTitle" = "OK";
+"com.loudnate.LoopKit.errorAlertActionTitle" = "ОК";
 
 /* The title for the override emoji condition section */
 "Condition" = "Условие";
@@ -239,7 +239,7 @@
 "Units" = "Единицы";
 
 /* Accessibility value for an unknown value
-The default title to use when an entry has none */
+   The default title to use when an entry has none */
 "Unknown" = "Неизвестно";
 
 /* Label indicating validation is occurring */
@@ -250,4 +250,3 @@ The default title to use when an entry has none */
 
 /* Title for the workout override range */
 "Workout" = "Физическая нагрузка";
-

Dependencies/LoopKit/LoopKitUI/sv.lproj/Localizable.strings

@@ -9,7 +9,7 @@
 "%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
 
 /* The format for an insulin needs percentage. */
-"%@%% of normal insulin" = "%@%% of normal insulin";
+"%@%% of normal insulin" = "%@%% av normalt insulinbehov";
 
 /* Appends a full-stop to a statement */
 "%@." = "%@.";
@@ -166,7 +166,7 @@
 "Override presets can be set up under the 'Configuration' section of the settings screen." = "Override förinställningar kan ställas in under ‘Konfiguration’ i menyn inställningar.";
 
 /* The section title of glucose overrides */
-"Overrides" = "Overrides";
+"Overrides" = "Undantag";
 
 /* Title for the pre-meal override range */
 "Pre-Meal" = "Före måltid";

Dependencies/LoopKit/LoopKitUI/zh-Hans.lproj/Localizable.strings

@@ -1,15 +1,3 @@
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
-
-/* The format for an insulin needs percentage. */
-"%@%% of normal insulin" = "%@%% 胰岛素";
-
-/* Format string for reservoir volume. (1: The localized volume) */
-"%@U" = "%@U";
-
-/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
-"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
-
 /* The format for an override preset cell. (1: symbol)(2: name)
    The format for an override symbol and name (1: symbol)(2: name) */
 "%1$@ %2$@" = "%1$@ %2$@";
@@ -17,6 +5,18 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
 "%1$@ units remaining at %2$@" = "在%2$@还剩余%1$@";
 
+/* The format for a glucose target range. (1: min target)(2: max target)(3: glucose unit) */
+"%1$@ – %2$@ %3$@" = "%1$@ – %2$@ %3$@";
+
+/* The format for an insulin needs percentage. */
+"%@%% of normal insulin" = "%@%% 胰岛素";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
+
 /* Title of the carb entry absorption time cell */
 "Absorption Time" = "吸收时间";
 
@@ -78,7 +78,7 @@
 "com.loudnate.InsulinKit.totalDateLabel" = "自从 %1$@";
 
 /* The title of the action used to dismiss an error alert */
-"com.loudnate.LoopKit.errorAlertActionTitle" = "OK";
+"com.loudnate.LoopKit.errorAlertActionTitle" = "确定";
 
 /* The title for the override emoji condition section */
 "Condition" = "条件";
@@ -250,4 +250,3 @@
 
 /* Title for the workout override range */
 "Workout" = "锻炼/运动模式";
-

Dependencies/OmniBLE/Localizations/nb.lproj/Localizable.strings

@@ -96,13 +96,13 @@
 "Pair Pod" = "Pair Pod";
 
 /* Pairing action button accessibility label while ready to pair */
-"Pair pod." = "Pair pod.";
+"Pair pod." = "Tilkoble pod.";
 
 /* Pairing action button accessibility label while pairing */
-"Pairing." = "Pairing.";
+"Pairing." = "Kobler sammen.";
 
 /* Pairing action button accessibility label while priming */
-"Priming. Please wait." = "Priming. Please wait.";
+"Priming. Please wait." = "Fyller. Vennligst vent.";
 
 /* Pairing action button accessibility label when pairing succeeded */
 "Pod paired successfully. Continue." = "Pod paired successfully. Continue.";
@@ -403,7 +403,7 @@
 "Pod deactivated successfully. Continue." = "Pod deactivated successfully. Continue.";
 
 /* Action button description for deactivate after failed attempt */
-"Retry" = "Retry";
+"Retry" = "Prøv igjen";
 
 /* Action button description when deactivated */
 "Continue" = "Fortsett";
@@ -412,19 +412,19 @@
 "There was a problem communicating with the pod. If this problem persists, tap Discard Pod. You can then activate a new Pod." = "There was a problem communicating with the pod. If this problem persists, tap Discard Pod. You can then activate a new Pod.";
 
 /* Text for discard pod button */
-"Discard Pod" = "Discard Pod";
+"Discard Pod" = "Forkast pod";
 
 /* Title for remove pod modal */
-"Remove Pod from Body" = "Remove Pod from Body";
+"Remove Pod from Body" = "Fjern pod fra kroppen";
 
 /* Alert message body for confirm pod attachment */
-"Your Pod may still be delivering Insulin.\nRemove it from your body, then tap “Continue.“" = "Your Pod may still be delivering Insulin.\nRemove it from your body, then tap “Continue.“";
+"Your Pod may still be delivering Insulin.\nRemove it from your body, then tap “Continue.“" = "Det kan fortsatt bli levert insulin fra poden.\nFjern den fra kroppen, og trykk \"Fortsett\".";
 
 /* Insulin Unit */
 "U" = "E";
 
 /* The action string on pod status page when pod expired */
-"Change Pod now. Insulin delivery will stop 8 hours after the Pod has expired or when no more insulin remains." = "Change Pod now. Insulin delivery will stop 8 hours after the Pod has expired or when no more insulin remains.";
+"Change Pod now. Insulin delivery will stop 8 hours after the Pod has expired or when no more insulin remains." = "Bytt pod nå. Insulintilførsel stopper 8 timer etter at den er utgått eller når det ikke er mer insulin igjen.";
 
 /* Label text for step 1 of pair pod instructions */
 "Fill a new pod with U-100 Insulin (leave blue Pod needle cap on)." = "Fyll en ny pod med U-100 insulin (la blått beskyttelsesdeksel være på).";
@@ -464,7 +464,7 @@
 "Continue" = "Fortsett";
 
 /* */
-"Attach Pod" = "Attach Pod";
+"Attach Pod" = "Fest pod";
 
 /* Alert title for confirm pod attachment */
 "Confirm Pod Attachment" = "Confirm Pod Attachment";
@@ -473,25 +473,25 @@
 "Please confirm that the Pod is securely attached to your body.\n\nThe cannula can be inserted only once with each Pod. Tap “Confirm” when Pod is attached." = "Please confirm that the Pod is securely attached to your body.\n\nThe cannula can be inserted only once with each Pod. Tap “Confirm” when Pod is attached.";
 
 /* Button title for confirm attachment option */
-"Confirm" = "Confirm";
+"Confirm" = "Bekreft";
 
 /* Label text for step one of insert cannula instructions */
-"Tap below to start cannula insertion." = "Tap below to start cannula insertion.";
+"Tap below to start cannula insertion." = "Trykk under for å begynne innsetting av kanylen.";
 
 /* Label text for step two of insert cannula instructions */
-"Wait until insertion is completed." = "Wait until insertion is completed.";
+"Wait until insertion is completed." = "Vent til innsettingen er fullført.";
 
 /* Label text indicating insertion finished. */
-"Inserted" = "Inserted";
+"Inserted" = "Kanyle er satt inn";
 
 /* Check Cannula */
-"Check Cannula" = "Check Cannula";
+"Check Cannula" = "Kontroller kanyle";
 
 /* */
-"Is the cannula inserted properly?" = "Is the cannula inserted properly?";
+"Is the cannula inserted properly?" = "Er kanylen satt inn riktig?";
 
 /* Description of proper cannula insertion */
-"The window on the top of the Pod should be colored pink when the cannula is properly inserted into the skin." = "The window on the top of the Pod should be colored pink when the cannula is properly inserted into the skin.";
+"The window on the top of the Pod should be colored pink when the cannula is properly inserted into the skin." = "Vinduet på oversiden av pod skal farges rosa når kanylen har blitt satt inn riktig.";
 
 /* Button label for user to answer cannula was properly inserted  */
 "Yes" = "Ja";

Dependencies/OmniBLE/Localizations/tr.lproj/Localizable.strings

@@ -213,13 +213,13 @@
 "Finish Pairing" = "Eşleştirmeyi Bitir";
 
 /* Status highlight that when pod is deactivating */
-"Finish Deactivation" = "Devre Dışı Bırakmayı, Bitir";
+"Finish Deactivation" = "Devre dışı bırakma işlemini tamamla";
 
 /* Status highlight that when no pod is paired. */
 "No Pod" = "Pod Yok";
 
 /* Status highlight message for emptyReservoir alarm. */
-"No Insulin" = "İnsülin Bulunmuyor";
+"No Insulin" = "İnsülin Yok";
 
 /* Status highlight message for podExpired alarm. */
 "Pod Expired" = "Pod Süreci Doldu";
@@ -231,7 +231,7 @@
 "Pod Error" = "Pod hatası";
 
 /* Status highlight that a pump is out of insulin. */
-"No Insulin" = "İnsülin Bulunmuyor";
+"No Insulin" = "İnsülin Yok";
 
 /* Status highlight that insulin delivery was suspended. */
 "Insulin Suspended" = "İnsülin Durduldu";
@@ -427,7 +427,7 @@
 "Change Pod now. Insulin delivery will stop 8 hours after the Pod has expired or when no more insulin remains." = "Pod'u şimdi değiştirin. İnsülin iletimi, Pod'un süresi dolduktan 8 saat sonra veya daha fazla insülin kalmadığında duracaktır.";
 
 /* Label text for step 1 of pair pod instructions */
-"Fill a new pod with U-100 Insulin (leave blue Pod needle cap on)." = "Yeni bir Pod'u U-100 İnsülin ile doldurun (mavi Pod iğne kapağı üzerinde kalsın).";
+"Fill a new pod with U-100 Insulin (leave blue Pod needle cap on)." = "Yeni bir Pod'u 100 Ü İnsülin ile doldurun (mavi iğne kapağı Pod üzerinde kalsın).";
 
 /* Label text for step 2 of pair pod instructions */
 "Listen for 2 beeps." = "2 bip sesini dinleyin.";

Dependencies/rileylink_ios/OmniKitUI/ar.lproj/Localizable.strings

@@ -0,0 +1,231 @@
+/* Accessibility format string for (1: localized volume)(2: time) */
+"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+
+/* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
+"%1$@%2$@%3$@" = "%1$@%2$@%3$@";
+
+/* Format string providing instructions for replacing pod due to a fault. (1: The fault description) */
+"%1$@. Insulin delivery has stopped. Please deactivate and remove pod." = "%1$@. Insulin delivery has stopped. Please deactivate and remove pod.";
+
+/* Format string for delivered insulin. (1: The localized amount)
+   Format string for insulin remaining in reservoir. (1: The localized amount) */
+"%@ U" = "%@ U";
+
+/* Format string for bolus progress when finished. (1: The localized amount) */
+"%@ U (Finished)" = "%@ U (Finished)";
+
+/* Format string for bolus progress. (1: The delivered amount) (2: The programmed amount) (3: the percent progress) */
+"%@ U of %@ U (%@)" = "%1$@ U of %2$@ U (%3$@)";
+
+/* Format string for temp basal rate. (1: The localized amount) */
+"%@ U/hour" = "%@ U/hour";
+
+/* Format string for bolus percent progress. (1: Percent progress) */
+"%@%%" = "%@%%";
+
+/* Format string for reservoir reading when above or equal to maximum reading. (1: The localized amount) */
+"%@+ U" = "%@+ U";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
+
+/* The title of the cell showing the pod activated at time */
+"Active Time" = "Active Time";
+
+/* The title of the cell showing alarm status */
+"Alarms" = "Alarms";
+
+/* Confirmation message for shutting down a pod */
+"Are you sure you want to shutdown this pod?" = "Are you sure you want to shutdown this pod?";
+
+/* Confirmation message for removing Omnipod PumpManager */
+"Are you sure you want to stop using Omnipod?" = "Are you sure you want to stop using Omnipod?";
+
+/* The title text for the address assigned to the pod */
+"Assigned Address" = "Assigned Address";
+
+/* The title of the cell showing pod basal status */
+"Basal Delivery" = "Basal Delivery";
+
+/* The title text for the basal rate schedule */
+"Basal Rates" = "Basal Rates";
+
+/* The title of the cell showing pod bolus status */
+"Bolus Delivery" = "Bolus Delivery";
+
+/* The title of the cancel action in an action sheet */
+"Cancel" = "Cancel";
+
+/* The title of the command to change pump time zone */
+"Change Time Zone" = "Change Time Zone";
+
+/* Progress message for changing pod time. */
+"Changing time…" = "Changing time…";
+
+/* The title of the configuration section in settings */
+"Configuration" = "Configuration";
+
+/* The title of the continue action in an action sheet */
+"Continue" = "Continue";
+
+/* Button title to deactivate pod because of fault during setup */
+"Deactivate" = "Deactivate";
+
+/* Button title for pod deactivation
+   Button title to deactivate pod */
+"Deactivate Pod" = "Deactivate Pod";
+
+/* Button title to delete Omnipod PumpManager */
+"Delete Omnipod" = "Delete Omnipod";
+
+/* Title text for delivery limits */
+"Delivery Limits" = "Delivery Limits";
+
+/* The title of the device information section in settings */
+"Device Information" = "Device Information";
+
+/* Title text for button to disable bolus beeps */
+"Disable Bolus Beeps" = "Disable Bolus Beeps";
+
+/* Title text for button to enable bolus beeps */
+"Enable Bolus Beeps" = "Enable Bolus Beeps";
+
+/* The alert title for disable bolus beeps error */
+"Error disabling bolus beeps" = "Error disabling bolus beeps";
+
+/* The alert title for enable bolus beeps error */
+"Error enabling bolus beeps" = "Error enabling bolus beeps";
+
+/* The alert title for a resume error */
+"Error Resuming" = "Error Resuming";
+
+/* The alert title for a suspend error */
+"Error Suspending" = "Error Suspending";
+
+/* The title of the cell showing the pod expiration reminder date */
+"Expiration Reminder" = "Expiration Reminder";
+
+/* The title of the cell showing the pod expiration after expiry */
+"Expired" = "Expired";
+
+/* The title of the cell showing the pod expiration */
+"Expires" = "Expires";
+
+/* Pod life HUD view label */
+"Fault" = "Fault";
+
+/* The title of the command to finish pod setup */
+"Finish pod setup" = "Finish pod setup";
+
+/* Accessibility format string for (1: localized volume)(2: time) */
+"Greater than %1$@ units remaining at %2$@" = "Greater than %1$@ units remaining at %2$@";
+
+/* Instructions when deactivating pod that has been paired, but not attached. */
+"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod." = "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod.";
+
+/* Instructions when deactivating pod that has been paired and possibly attached. */
+"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and remove pod." = "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and remove pod.";
+
+/* Button title to insert cannula during setup */
+"Insert Cannula" = "Insert Cannula";
+
+/* The title of the cell showing delivered insulin */
+"Insulin Delivered" = "Insulin Delivered";
+
+/* The error message shown when Loop's basal schedule has an unsupported rate */
+"Invalid entry" = "Invalid entry";
+
+/* The title of the cell showing the pod lot id */
+"Lot" = "Lot";
+
+/* The detail text for bolus delivery when no bolus is being delivered */
+"None" = "None";
+
+/* Button title to pair with pod during setup */
+"Pair" = "Pair";
+
+/* The title of the command to pair new pod */
+"Pair New Pod" = "Pair New Pod";
+
+/* The text of the loading label when pairing */
+"Pairing…" = "Pairing…";
+
+/* The title of the cell showing the pod pi version */
+"PI Version" = "PI Version";
+
+/* The title of the command to play test beeps */
+"Play Test Beeps" = "Play Test Beeps";
+
+/* Progress message for play test beeps. */
+"Play Test Beeps…" = "Play Test Beeps…";
+
+/* The title of the cell showing the pod pm version */
+"PM Version" = "PM Version";
+
+/* Label describing pod age view */
+"Pod Age" = "Pod Age";
+
+/* Title of the pod settings view controller */
+"Pod Settings" = "Pod Settings";
+
+/* The text of the loading label when pod is primed */
+"Primed" = "Primed";
+
+/* The text of the loading label when priming */
+"Priming…" = "Priming…";
+
+/* Label describing time remaining view */
+"Remaining" = "Remaining";
+
+/* Label indicating pod replacement necessary
+   The title of the command to replace pod */
+"Replace Pod" = "Replace Pod";
+
+/* The title of the command to replace pod when there is a pod fault */
+"Replace Pod Now" = "Replace Pod Now";
+
+/* The title of the cell showing reservoir status */
+"Reservoir" = "Reservoir";
+
+/* Button title for retrying pod deactivation */
+"Retry Pod Deactivation" = "Retry Pod Deactivation";
+
+/* Title of button to save delivery limit settings
+   Title of button to sync basal profile when no pod paired */
+"Save" = "Save";
+
+/* The detail text of the basal row when pod is running scheduled basal */
+"Schedule" = "Schedule";
+
+/* The title of the status section in settings */
+"Status" = "Status";
+
+/* A message indicating a command succeeded */
+"Succeeded" = "Succeeded";
+
+/* The detail text of the basal row when pod is suspended */
+"Suspended" = "Suspended";
+
+/* Title text for the button to delete Omnipod PumpManager */
+"Switch from Omnipod Pumps" = "Switch from Omnipod Pumps";
+
+/* Title of button to sync basal profile from pod */
+"Sync With Pod" = "Sync With Pod";
+
+/* The title of the command to run the test command */
+"Test Command" = "Test Command";
+
+/* Progress message for testing commands. */
+"Testing Commands…" = "Testing Commands…";
+
+/* The error message shown when Loop's basal schedule has more entries than the pod can support */
+"Too many entries" = "Too many entries";
+
+/* Instructions when pod cannot be deactivated */
+"Unable to deactivate pod. Please continue and pair a new one." = "Unable to deactivate pod. Please continue and pair a new one.";
+
+/* The detail text for delivered insulin when no measurement is available */
+"Unknown" = "Unknown";

Dependencies/rileylink_ios/OmniKitUI/ca.lproj/Localizable.strings

@@ -0,0 +1,231 @@
+/* Accessibility format string for (1: localized volume)(2: time) */
+"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+
+/* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
+"%1$@%2$@%3$@" = "%1$@%2$@%3$@";
+
+/* Format string providing instructions for replacing pod due to a fault. (1: The fault description) */
+"%1$@. Insulin delivery has stopped. Please deactivate and remove pod." = "%1$@. Insulin delivery has stopped. Please deactivate and remove pod.";
+
+/* Format string for delivered insulin. (1: The localized amount)
+   Format string for insulin remaining in reservoir. (1: The localized amount) */
+"%@ U" = "%@ U";
+
+/* Format string for bolus progress when finished. (1: The localized amount) */
+"%@ U (Finished)" = "%@ U (Finished)";
+
+/* Format string for bolus progress. (1: The delivered amount) (2: The programmed amount) (3: the percent progress) */
+"%@ U of %@ U (%@)" = "%1$@ U of %2$@ U (%3$@)";
+
+/* Format string for temp basal rate. (1: The localized amount) */
+"%@ U/hour" = "%@ U/hour";
+
+/* Format string for bolus percent progress. (1: Percent progress) */
+"%@%%" = "%@%%";
+
+/* Format string for reservoir reading when above or equal to maximum reading. (1: The localized amount) */
+"%@+ U" = "%@+ U";
+
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
+/* Format string for reservoir volume. (1: The localized volume) */
+"%@U" = "%@U";
+
+/* The title of the cell showing the pod activated at time */
+"Active Time" = "Active Time";
+
+/* The title of the cell showing alarm status */
+"Alarms" = "Alarms";
+
+/* Confirmation message for shutting down a pod */
+"Are you sure you want to shutdown this pod?" = "Are you sure you want to shutdown this pod?";
+
+/* Confirmation message for removing Omnipod PumpManager */
+"Are you sure you want to stop using Omnipod?" = "Are you sure you want to stop using Omnipod?";
+
+/* The title text for the address assigned to the pod */
+"Assigned Address" = "Assigned Address";
+
+/* The title of the cell showing pod basal status */
+"Basal Delivery" = "Basal Delivery";
+
+/* The title text for the basal rate schedule */
+"Basal Rates" = "Basal Rates";
+
+/* The title of the cell showing pod bolus status */
+"Bolus Delivery" = "Bolus Delivery";
+
+/* The title of the cancel action in an action sheet */
+"Cancel" = "Cancel";
+
+/* The title of the command to change pump time zone */
+"Change Time Zone" = "Change Time Zone";
+
+/* Progress message for changing pod time. */
+"Changing time…" = "Changing time…";
+
+/* The title of the configuration section in settings */
+"Configuration" = "Configuration";
+
+/* The title of the continue action in an action sheet */
+"Continue" = "Continue";
+
+/* Button title to deactivate pod because of fault during setup */
+"Deactivate" = "Deactivate";
+
+/* Button title for pod deactivation
+   Button title to deactivate pod */
+"Deactivate Pod" = "Deactivate Pod";
+
+/* Button title to delete Omnipod PumpManager */
+"Delete Omnipod" = "Delete Omnipod";
+
+/* Title text for delivery limits */
+"Delivery Limits" = "Delivery Limits";
+
+/* The title of the device information section in settings */
+"Device Information" = "Device Information";
+
+/* Title text for button to disable bolus beeps */
+"Disable Bolus Beeps" = "Disable Bolus Beeps";
+
+/* Title text for button to enable bolus beeps */
+"Enable Bolus Beeps" = "Enable Bolus Beeps";
+
+/* The alert title for disable bolus beeps error */
+"Error disabling bolus beeps" = "Error disabling bolus beeps";
+
+/* The alert title for enable bolus beeps error */
+"Error enabling bolus beeps" = "Error enabling bolus beeps";
+
+/* The alert title for a resume error */
+"Error Resuming" = "Error Resuming";
+
+/* The alert title for a suspend error */
+"Error Suspending" = "Error Suspending";
+
+/* The title of the cell showing the pod expiration reminder date */
+"Expiration Reminder" = "Expiration Reminder";
+
+/* The title of the cell showing the pod expiration after expiry */
+"Expired" = "Expired";
+
+/* The title of the cell showing the pod expiration */
+"Expires" = "Expires";
+
+/* Pod life HUD view label */
+"Fault" = "Fault";
+
+/* The title of the command to finish pod setup */
+"Finish pod setup" = "Finish pod setup";
+
+/* Accessibility format string for (1: localized volume)(2: time) */
+"Greater than %1$@ units remaining at %2$@" = "Greater than %1$@ units remaining at %2$@";
+
+/* Instructions when deactivating pod that has been paired, but not attached. */
+"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod." = "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod.";
+
+/* Instructions when deactivating pod that has been paired and possibly attached. */
+"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and remove pod." = "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and remove pod.";
+
+/* Button title to insert cannula during setup */
+"Insert Cannula" = "Insert Cannula";
+
+/* The title of the cell showing delivered insulin */
+"Insulin Delivered" = "Insulin Delivered";
+
+/* The error message shown when Loop's basal schedule has an unsupported rate */
+"Invalid entry" = "Invalid entry";
+
+/* The title of the cell showing the pod lot id */
+"Lot" = "Lot";
+
+/* The detail text for bolus delivery when no bolus is being delivered */
+"None" = "None";
+
+/* Button title to pair with pod during setup */
+"Pair" = "Pair";
+
+/* The title of the command to pair new pod */
+"Pair New Pod" = "Pair New Pod";
+
+/* The text of the loading label when pairing */
+"Pairing…" = "Pairing…";
+
+/* The title of the cell showing the pod pi version */
+"PI Version" = "PI Version";
+
+/* The title of the command to play test beeps */
+"Play Test Beeps" = "Play Test Beeps";
+
+/* Progress message for play test beeps. */
+"Play Test Beeps…" = "Play Test Beeps…";
+
+/* The title of the cell showing the pod pm version */
+"PM Version" = "PM Version";
+
+/* Label describing pod age view */
+"Pod Age" = "Pod Age";
+
+/* Title of the pod settings view controller */
+"Pod Settings" = "Pod Settings";
+
+/* The text of the loading label when pod is primed */
+"Primed" = "Primed";
+
+/* The text of the loading label when priming */
+"Priming…" = "Priming…";
+
+/* Label describing time remaining view */
+"Remaining" = "Remaining";
+
+/* Label indicating pod replacement necessary
+   The title of the command to replace pod */
+"Replace Pod" = "Replace Pod";
+
+/* The title of the command to replace pod when there is a pod fault */
+"Replace Pod Now" = "Replace Pod Now";
+
+/* The title of the cell showing reservoir status */
+"Reservoir" = "Reservoir";
+
+/* Button title for retrying pod deactivation */
+"Retry Pod Deactivation" = "Retry Pod Deactivation";
+
+/* Title of button to save delivery limit settings
+   Title of button to sync basal profile when no pod paired */
+"Save" = "Save";
+
+/* The detail text of the basal row when pod is running scheduled basal */
+"Schedule" = "Schedule";
+
+/* The title of the status section in settings */
+"Status" = "Status";
+
+/* A message indicating a command succeeded */
+"Succeeded" = "Succeeded";
+
+/* The detail text of the basal row when pod is suspended */
+"Suspended" = "Suspended";
+
+/* Title text for the button to delete Omnipod PumpManager */
+"Switch from Omnipod Pumps" = "Switch from Omnipod Pumps";
+
+/* Title of button to sync basal profile from pod */
+"Sync With Pod" = "Sync With Pod";
+
+/* The title of the command to run the test command */
+"Test Command" = "Test Command";
+
+/* Progress message for testing commands. */
+"Testing Commands…" = "Testing Commands…";
+
+/* The error message shown when Loop's basal schedule has more entries than the pod can support */
+"Too many entries" = "Too many entries";
+
+/* Instructions when pod cannot be deactivated */
+"Unable to deactivate pod. Please continue and pair a new one." = "Unable to deactivate pod. Please continue and pair a new one.";
+
+/* The detail text for delivered insulin when no measurement is available */
+"Unknown" = "Unknown";

Dependencies/rileylink_ios/OmniKitUI/es.lproj/Localizable.strings

@@ -160,7 +160,7 @@
 "Play Test Beeps" = "Tocar Pitidos de Prueba";
 
 /* Progress message for play test beeps. */
-"Playing Test Beeps…" = "Tocado Pitidos de Prueba...";
+"Play Test Beeps…" = "Play Test Beeps…";
 
 /* The title of the cell showing the pod pm version */
 "PM Version" = "Versión de PM";

Dependencies/rileylink_ios/OmniKitUI/fi.lproj/Localizable.strings

@@ -1,3 +1,12 @@
+/* Accessibility format string for (1: localized volume)(2: time) */
+"%1$@ units remaining at %2$@" = "%1$@ yksikköä jäljellä %2$@";
+
+/* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
+"%1$@%2$@%3$@" = "%1$@%2$@%3$@";
+
+/* Format string providing instructions for replacing pod due to a fault. (1: The fault description) */
+"%1$@. Insulin delivery has stopped. Please deactivate and remove pod." = "%1$@. Insuliinin annostelu on loppunut. Deaktivoi ja poista pumppu.";
+
 /* Format string for delivered insulin. (1: The localized amount)
    Format string for insulin remaining in reservoir. (1: The localized amount) */
 "%@ U" = "%@ U";
@@ -11,27 +20,18 @@
 /* Format string for temp basal rate. (1: The localized amount) */
 "%@ U/hour" = "%@ U/tunti";
 
-/* Appends a full-stop to a statement */
-"%@." = "%@.";
-
 /* Format string for bolus percent progress. (1: Percent progress) */
 "%@%%" = "%@%%";
 
 /* Format string for reservoir reading when above or equal to maximum reading. (1: The localized amount) */
 "%@+ U" = "%@+ U";
 
+/* Appends a full-stop to a statement */
+"%@." = "%@.";
+
 /* Format string for reservoir volume. (1: The localized volume) */
 "%@U" = "%@U";
 
-/* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ yksikköä jäljellä %2$@";
-
-/* Format string providing instructions for replacing pod due to a fault. (1: The fault description) */
-"%1$@. Insulin delivery has stopped. Please deactivate and remove pod." = "%1$@. Insuliinin annostelu on loppunut. Deaktivoi ja poista pumppu.";
-
-/* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
-"%1$@%2$@%3$@" = "%1$@%2$@%3$@";
-
 /* The title of the cell showing the pod activated at time */
 "Active Time" = "Aktiivinen aika";
 
@@ -90,30 +90,15 @@
 /* Title text for button to disable bolus beeps */
 "Disable Bolus Beeps" = "Laita bolusäänet pois";
 
-/* Title text for button to disable confirmation beeps */
-"Disable Confirmation Beeps" = "Laita vahvistusäänet pois";
-
 /* Title text for button to enable bolus beeps */
 "Enable Bolus Beeps" = "Laita bolusäänet päälle";
 
-/* Title text for button to enable confirmation beeps */
-"Enable Confirmation Beeps" = "Laita vahvistusäänet päälle";
-
 /* The alert title for disable bolus beeps error */
 "Error disabling bolus beeps" = "Virhe laitettaessa bolusäänet pois päältä";
 
-/* The alert title for disable confirmation beeps error */
-"Error disabling confirmation beeps" = "Virhe laitettaessa vahvistusäänet pois päältä";
-
-/* The alert title for emitting completion beep error */
-"Error emitting completion confirmation beep" = "Virhe lähetettäessä valmistumisen vahvistusääni";
-
 /* The alert title for enable bolus beeps error */
 "Error enabling bolus beeps" = "Virhe laitettaessa bolusäänet päälle";
 
-/* The alert title for enable confirmation beeps error */
-"Error enabling confirmation beeps" = "Virhe laitettaessa vahvistusäänet päälle";
-
 /* The alert title for a resume error */
 "Error Resuming" = "Virhe jatkamisessa";
 
@@ -192,18 +177,6 @@
 /* The text of the loading label when priming */
 "Priming…" = "Alustetaan…";
 
-/* The title of the command to read the pod status */
-"Read Pod Status" = "Lue pumpun tila";
-
-/* Progress message for reading Pod status. */
-"Read Pod Status…" = "Luetaan pumpun tilaa…";
-
-/* The title of the command to read the pulse log */
-"Read Pulse Log" = "Lue pulssiloki";
-
-/* Progress message for reading pulse log. */
-"Reading Pulse Log…" = "Luetaan pulssilokia…";
-
 /* Label describing time remaining view */
 "Remaining" = "Jäljellä";
 
@@ -256,4 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Tuntematon";
-

Dependencies/rileylink_ios/OmniKitUI/fr.lproj/Localizable.strings

@@ -35,9 +35,6 @@
 /* The title of the cell showing the pod activated at time */
 "Active Time" = "Heure d’activation";
 
-/* The title of the cell showing the Pod Active Clock */
-"Pod Active Clock" = "Horloge active Pod";
-
 /* The title of the cell showing alarm status */
 "Alarms" = "Alarmes";
 
@@ -71,9 +68,6 @@
 /* The title of the configuration section in settings */
 "Configuration" = "Configuration";
 
-/* The title of the Insulin Type */
-"Insulin Type" = "Type d'Insuline";
-
 /* The title of the continue action in an action sheet */
 "Continue" = "Continuer";
 
@@ -105,18 +99,6 @@
 /* The alert title for enable bolus beeps error */
 "Error enabling bolus beeps" = "Erreur lors de l’activation des bips de bolus";
 
-/* The alert title for enable Confirmation Beeps */
-"Enable Confirmation Beeps" = "Activer les bips de confirmation";
-
-/* The alert title for Disable Confirmation Beep */
-"Disable Confirmation Beeps" = "Désactiver les bips de confirmation";
-
-/* The alert title for enable Automatic Bolus Beeps */
-"Enable Automatic Bolus Beeps" = "Activer les bips de Bolus automatiques";
-
-/* The alert title for Disable Automatic Bolus Beeps */
-"Disable Automatic Bolus Beeps" = "Désactiver les bips de bolus automatiques";
-
 /* The alert title for a resume error */
 "Error Resuming" = "Erreur lors de la reprise";
 
@@ -184,7 +166,7 @@
 "PM Version" = "Version PM";
 
 /* Label describing pod age view */
-"Pod Age" = " âge pod";
+"Pod Age" = "Âge du pod";
 
 /* Title of the pod settings view controller */
 "Pod Settings" = "Réglages du pod";
@@ -247,15 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Inconnu";
-
-/* The title of the diagnostics section in settings */
-"Diagnostics" = "Diagnostic";
-
-/* The diagnostic command Read Pod Status */
-"Read Pod Status" = "Lire l’état de la pompe";
-
-/* The diagnostic command Read Pulse Log */
-"Read Pulse Log" = "Lecture journal d'impulsion";
-
-/* The title of the pod details section in settings */
-"Pod Details" = "Détails du Pod";

Dependencies/rileylink_ios/OmniKitUI/it.lproj/Localizable.strings

@@ -229,4 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Sconosciuto";
-

Dependencies/rileylink_ios/OmniKitUI/nb.lproj/Localizable.strings

@@ -1,5 +1,5 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+"%1$@ units remaining at %2$@" = "%1$@ enheter gjennstår klokken %2$@";
 
 /* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
 "%1$@%2$@%3$@" = "%1$@%2$@%3$@";
@@ -15,7 +15,7 @@
 "%@ U (Finished)" = "%@ E (Ferdig)";
 
 /* Format string for bolus progress. (1: The delivered amount) (2: The programmed amount) (3: the percent progress) */
-"%@ U of %@ U (%@)" = "%@ E av %@ E (%@)";
+"%@ U of %@ U (%@)" = "%1$@ E av %2$@ E (%3$@)";
 
 /* Format string for temp basal rate. (1: The localized amount) */
 "%@ U/hour" = "%@ E/time";
@@ -45,7 +45,7 @@
 "Are you sure you want to stop using Omnipod?" = "Er du sikker på at du vil slutte å bruke Omnipod?";
 
 /* The title text for the address assigned to the pod */
-"Assigned Address" = "Tildelt Adresse";
+"Assigned Address" = "Tildelt adresse";
 
 /* The title of the cell showing pod basal status */
 "Basal Delivery" = "Basalleveranse";
@@ -151,19 +151,19 @@
 "Pair New Pod" = "Koble sammen ny pod";
 
 /* The text of the loading label when pairing */
-"Pairing…" = "Kobler sammen...";
+"Pairing…" = "Kobler sammen…";
 
 /* The title of the cell showing the pod pi version */
-"PI Version" = "PI Versjon";
+"PI Version" = "PI-versjon";
 
 /* The title of the command to play test beeps */
 "Play Test Beeps" = "Spill test-toner";
 
 /* Progress message for play test beeps. */
-"Play Test Beeps…" = "Spill test-toner...";
+"Play Test Beeps…" = "Spill test-toner…";
 
 /* The title of the cell showing the pod pm version */
-"PM Version" = "PM Versjon";
+"PM Version" = "PM-versjon";
 
 /* Label describing pod age view */
 "Pod Age" = "Pod-alder";
@@ -175,7 +175,7 @@
 "Primed" = "Fyllt";
 
 /* The text of the loading label when priming */
-"Priming…" = "Fyller...";
+"Priming…" = "Fyller…";
 
 /* Label describing time remaining view */
 "Remaining" = "Gjenstående";
@@ -219,7 +219,7 @@
 "Test Command" = "Test kommando";
 
 /* Progress message for testing commands. */
-"Testing Commands…" = "Tester kommandoer...";
+"Testing Commands…" = "Tester kommandoer…";
 
 /* The error message shown when Loop's basal schedule has more entries than the pod can support */
 "Too many entries" = "For mange oppføringer";
@@ -229,4 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Ukjent";
-

Dependencies/rileylink_ios/OmniKitUI/nl.lproj/Localizable.strings

@@ -1,5 +1,5 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ eenheden aanwezig op %2$@";
+"%1$@ units remaining at %2$@" = "%1$@ eenheden aanwezig om %2$@";
 
 /* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
 "%1$@%2$@%3$@" = "%1$@%2$@%3$@";
@@ -35,9 +35,6 @@
 /* The title of the cell showing the pod activated at time */
 "Active Time" = "Activatie tijd";
 
-/* The title of the cell showing the Pod Active Clock */
-"Pod Active Clock" = "Pod actieve klok";
-
 /* The title of the cell showing alarm status */
 "Alarms" = "Alarmen";
 
@@ -91,7 +88,7 @@
 "Device Information" = "Apparaat informatie";
 
 /* Title text for button to disable bolus beeps */
-"Disable Bolus Beeps" = "Stop gebruik Bolus Piepjes";
+"Disable Bolus Beeps" = "Bolus piepjes uitschakelen";
 
 /* Title text for button to enable bolus beeps */
 "Enable Bolus Beeps" = "Pas Bolus Piepjes gebruik toe";
@@ -232,4 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Onbekend";
-

Dependencies/rileylink_ios/OmniKitUI/pt-BR.lproj/Localizable.strings

@@ -1,5 +1,5 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ unidades restantes em %2$@";
+"%1$@ units remaining at %2$@" = "%1$@ unidades restantes as %2$@";
 
 /* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
 "%1$@%2$@%3$@" = "%1$@%2$@%3$@";
@@ -139,7 +139,7 @@
 "Invalid entry" = "Entrada inválida";
 
 /* The title of the cell showing the pod lot id */
-"Lot" = "Lot";
+"Lot" = "Lote";
 
 /* The detail text for bolus delivery when no bolus is being delivered */
 "None" = "Nenhum";

Dependencies/rileylink_ios/OmniKitUI/pt-PT.lproj/Localizable.strings

@@ -35,9 +35,6 @@
 /* The title of the cell showing the pod activated at time */
 "Active Time" = "Active Time";
 
-/* The title of the cell showing the Pod Active Clock */
-"Pod Active Clock" = "Pod Active Clock";
-
 /* The title of the cell showing alarm status */
 "Alarms" = "Alarms";
 
@@ -71,9 +68,6 @@
 /* The title of the configuration section in settings */
 "Configuration" = "Ajustes";
 
-/* The title of the Insulin Type */
-"Insulin Type" = "Insulin Type";
-
 /* The title of the continue action in an action sheet */
 "Continue" = "Continue";
 
@@ -105,18 +99,6 @@
 /* The alert title for enable bolus beeps error */
 "Error enabling bolus beeps" = "Error enabling bolus beeps";
 
-/* The alert title for enable Confirmation Beeps */
-"Enable Confirmation Beeps" = "Enable Confirmation Beeps";
-
-/* The alert title for Disable Confirmation Beep */
-"Disable Confirmation Beeps" = "Disable Confirmation Beeps";
-
-/* The alert title for enable Automatic Bolus Beeps */
-"Enable Automatic Bolus Beeps" = "Enable Automatic Bolus Beeps";
-
-/* The alert title for Disable Automatic Bolus Beeps */
-"Disable Automatic Bolus Beeps" = "Disable Automatic Bolus Beeps";
-
 /* The alert title for a resume error */
 "Error Resuming" = "Error Resuming";
 
@@ -247,15 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Unknown";
-
-/* The title of the diagnostics section in settings */
-"Diagnostics" = "Diagnostics";
-
-/* The diagnostic command Read Pod Status */
-"Read Pod Status" = "Read Pod Status";
-
-/* The diagnostic command Read Pulse Log */
-"Read Pulse Log" = "Read Pulse Log";
-
-/* The title of the pod details section in settings */
-"Pod Details" = "Pod Details";

Dependencies/rileylink_ios/OmniKitUI/ru.lproj/Localizable.strings

@@ -175,7 +175,7 @@
 "Primed" = "Заполнено";
 
 /* The text of the loading label when priming */
-"Priming…" = "";
+"Priming…" = "Заполнение…";
 
 /* Label describing time remaining view */
 "Remaining" = "Заполняется";

Dependencies/rileylink_ios/OmniKitUI/sk.lproj/Localizable.strings

@@ -35,9 +35,6 @@
 /* The title of the cell showing the pod activated at time */
 "Active Time" = "Aktívny Čas";
 
-/* The title of the cell showing the Pod Active Clock */
-"Pod Active Clock" = "Aktívne Hodiny Podu";
-
 /* The title of the cell showing alarm status */
 "Alarms" = "Alarmy";
 
@@ -71,9 +68,6 @@
 /* The title of the configuration section in settings */
 "Configuration" = "Configuration";
 
-/* The title of the Insulin Type */
-"Insulin Type" = "Typ Inzulínu";
-
 /* The title of the continue action in an action sheet */
 "Continue" = "Pokračovať";
 
@@ -105,18 +99,6 @@
 /* The alert title for enable bolus beeps error */
 "Error enabling bolus beeps" = "Chyba zapnutia pípnutie pre bolus";
 
-/* The alert title for enable Confirmation Beeps */
-"Enable Confirmation Beeps" = "Zapnúť Potvrdzovacie Pípnutia";
-
-/* The alert title for Disable Confirmation Beep */
-"Disable Confirmation Beeps" = "Vypnúť Potvrdzovacie Pípnutia";
-
-/* The alert title for enable Automatic Bolus Beeps */
-"Enable Automatic Bolus Beeps" = "Povoliť Automatické Pípnutia pre Bolus";
-
-/* The alert title for Disable Automatic Bolus Beeps */
-"Disable Automatic Bolus Beeps" = "Vypnúť Automatické Pípnutia pre Bolus";
-
 /* The alert title for a resume error */
 "Error Resuming" = "Zhrnutie Chyby";
 
@@ -247,15 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Unknown";
-
-/* The title of the diagnostics section in settings */
-"Diagnostics" = "Diagnostics";
-
-/* The diagnostic command Read Pod Status */
-"Read Pod Status" = "Read Pod Status";
-
-/* The diagnostic command Read Pulse Log */
-"Read Pulse Log" = "Read Pulse Log";
-
-/* The title of the pod details section in settings */
-"Pod Details" = "Pod Details";

Dependencies/rileylink_ios/OmniKitUI/tr.lproj/Localizable.strings

@@ -1,231 +1,231 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+"%1$@ units remaining at %2$@" = "%1$@ ünite %2$@'de kaldı";
 
 /* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
 "%1$@%2$@%3$@" = "%1$@%2$@%3$@";
 
 /* Format string providing instructions for replacing pod due to a fault. (1: The fault description) */
-"%1$@. Insulin delivery has stopped. Please deactivate and remove pod." = "%1$@. Insulin delivery has stopped. Please deactivate and remove pod.";
+"%1$@. Insulin delivery has stopped. Please deactivate and remove pod." = "%1$@. İnsülin iletimi durduruldu. Lütfen pod'u devre dışı bırakın ve çıkartın.";
 
 /* Format string for delivered insulin. (1: The localized amount)
    Format string for insulin remaining in reservoir. (1: The localized amount) */
-"%@ U" = "%@ U";
+"%@ U" = "%@ Ü";
 
 /* Format string for bolus progress when finished. (1: The localized amount) */
-"%@ U (Finished)" = "%@ U (Finished)";
+"%@ U (Finished)" = "%@ Ü (Tamamlandı)";
 
 /* Format string for bolus progress. (1: The delivered amount) (2: The programmed amount) (3: the percent progress) */
-"%@ U of %@ U (%@)" = "%1$@ U of %2$@ U (%3$@)";
+"%@ U of %@ U (%@)" = "%2$@ Ü den %1$@ Ü (%3$@)";
 
 /* Format string for temp basal rate. (1: The localized amount) */
-"%@ U/hour" = "%@ U/hour";
+"%@ U/hour" = "%@ Ü/Sa";
 
 /* Format string for bolus percent progress. (1: Percent progress) */
 "%@%%" = "%@%%";
 
 /* Format string for reservoir reading when above or equal to maximum reading. (1: The localized amount) */
-"%@+ U" = "%@+ U";
+"%@+ U" = "%@+ Ü";
 
 /* Appends a full-stop to a statement */
 "%@." = "%@.";
 
 /* Format string for reservoir volume. (1: The localized volume) */
-"%@U" = "%@U";
+"%@U" = "%@Ü";
 
 /* The title of the cell showing the pod activated at time */
-"Active Time" = "Active Time";
+"Active Time" = "Aktif Süre";
 
 /* The title of the cell showing alarm status */
-"Alarms" = "Alarms";
+"Alarms" = "Alarmlar";
 
 /* Confirmation message for shutting down a pod */
-"Are you sure you want to shutdown this pod?" = "Are you sure you want to shutdown this pod?";
+"Are you sure you want to shutdown this pod?" = "Bu pod'u iptal etmek istediğinizden emin misiniz?";
 
 /* Confirmation message for removing Omnipod PumpManager */
-"Are you sure you want to stop using Omnipod?" = "Are you sure you want to stop using Omnipod?";
+"Are you sure you want to stop using Omnipod?" = "Omnipod'u kullanmayı bırakmak istediğinizden emin misiniz?";
 
 /* The title text for the address assigned to the pod */
 "Assigned Address" = "Adres Atandı";
 
 /* The title of the cell showing pod basal status */
-"Basal Delivery" = "Basal Delivery";
+"Basal Delivery" = "Bazal İletimi";
 
 /* The title text for the basal rate schedule */
-"Basal Rates" = "Basal Rates";
+"Basal Rates" = "Bazal Oranları";
 
 /* The title of the cell showing pod bolus status */
-"Bolus Delivery" = "Bolus Delivery";
+"Bolus Delivery" = "Bolus İletimi";
 
 /* The title of the cancel action in an action sheet */
-"Cancel" = "Cancel";
+"Cancel" = "Vazgeç";
 
 /* The title of the command to change pump time zone */
-"Change Time Zone" = "Change Time Zone";
+"Change Time Zone" = "Zaman dilimini Değiştir";
 
 /* Progress message for changing pod time. */
 "Changing time…" = "Zaman değiştiriliyor…";
 
 /* The title of the configuration section in settings */
-"Configuration" = "Configuration";
+"Configuration" = "Yapılandırma";
 
 /* The title of the continue action in an action sheet */
-"Continue" = "Continue";
+"Continue" = "Devam et";
 
 /* Button title to deactivate pod because of fault during setup */
-"Deactivate" = "Deactivate";
+"Deactivate" = "Devredışı bırak";
 
 /* Button title for pod deactivation
    Button title to deactivate pod */
-"Deactivate Pod" = "Deactivate Pod";
+"Deactivate Pod" = "Pod'u devredışı bırak";
 
 /* Button title to delete Omnipod PumpManager */
 "Delete Omnipod" = "Omnipod'u Sil";
 
 /* Title text for delivery limits */
-"Delivery Limits" = "Delivery Limits";
+"Delivery Limits" = "İletim Kısıtlamaları";
 
 /* The title of the device information section in settings */
-"Device Information" = "Device Information";
+"Device Information" = "Cihaz Bilgileri";
 
 /* Title text for button to disable bolus beeps */
-"Disable Bolus Beeps" = "Disable Bolus Beeps";
+"Disable Bolus Beeps" = "Bolus Uyarılarını Devre Dışı Bırak";
 
 /* Title text for button to enable bolus beeps */
-"Enable Bolus Beeps" = "Enable Bolus Beeps";
+"Enable Bolus Beeps" = "Bolus Uyarılarını Etkinleştir";
 
 /* The alert title for disable bolus beeps error */
 "Error disabling bolus beeps" = "Bolus uyarılarını devre dışı bırakırken hata oluştu";
 
 /* The alert title for enable bolus beeps error */
-"Error enabling bolus beeps" = "Error enabling bolus beeps";
+"Error enabling bolus beeps" = "Bolus uyarılarını etkinleştirirken hata oluştu";
 
 /* The alert title for a resume error */
-"Error Resuming" = "Error Resuming";
+"Error Resuming" = "Devam ederken hata oluştu";
 
 /* The alert title for a suspend error */
 "Error Suspending" = "Askıya alırken Hata";
 
 /* The title of the cell showing the pod expiration reminder date */
-"Expiration Reminder" = "Expiration Reminder";
+"Expiration Reminder" = "Süre Sonu Hatırlatıcısı";
 
 /* The title of the cell showing the pod expiration after expiry */
-"Expired" = "Expired";
+"Expired" = "Süresi doldu";
 
 /* The title of the cell showing the pod expiration */
-"Expires" = "Expires";
+"Expires" = "Bitiyor";
 
 /* Pod life HUD view label */
-"Fault" = "Fault";
+"Fault" = "Hata";
 
 /* The title of the command to finish pod setup */
-"Finish pod setup" = "Finish pod setup";
+"Finish pod setup" = "Pod kurulumu bitir";
 
 /* Accessibility format string for (1: localized volume)(2: time) */
-"Greater than %1$@ units remaining at %2$@" = "Greater than %1$@ units remaining at %2$@";
+"Greater than %1$@ units remaining at %2$@" = "%2$@ 'te %1$@ üniteden fazla kaldı";
 
 /* Instructions when deactivating pod that has been paired, but not attached. */
-"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod." = "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod.";
+"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod." = "Eksik ayarlanmış pod, yenisiyle eşleştirmeden önce devre dışı bırakılmalıdır. Lütfen pod'u devre dışı bırakın ve atın.";
 
 /* Instructions when deactivating pod that has been paired and possibly attached. */
-"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and remove pod." = "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and remove pod.";
+"Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and remove pod." = "Eksik ayarlanmış pod, yenisiyle eşleştirmeden önce devre dışı bırakılmalıdır. Lütfen pod'u devre dışı bırakın ve çıkartın.";
 
 /* Button title to insert cannula during setup */
-"Insert Cannula" = "Insert Cannula";
+"Insert Cannula" = "Kanül Yerleştir";
 
 /* The title of the cell showing delivered insulin */
-"Insulin Delivered" = "Insulin Delivered";
+"Insulin Delivered" = "İnsülin Gönderildi";
 
 /* The error message shown when Loop's basal schedule has an unsupported rate */
-"Invalid entry" = "Invalid entry";
+"Invalid entry" = "Geçersiz girdi";
 
 /* The title of the cell showing the pod lot id */
-"Lot" = "Lot";
+"Lot" = "Parti";
 
 /* The detail text for bolus delivery when no bolus is being delivered */
-"None" = "None";
+"None" = "Hiçbiri";
 
 /* Button title to pair with pod during setup */
-"Pair" = "Pair";
+"Pair" = "Eşleştir";
 
 /* The title of the command to pair new pod */
 "Pair New Pod" = "Yeni Pod Eşleştir";
 
 /* The text of the loading label when pairing */
-"Pairing…" = "Pairing…";
+"Pairing…" = "Eşlestiriliyor…";
 
 /* The title of the cell showing the pod pi version */
-"PI Version" = "PI Version";
+"PI Version" = "PI Sürümü";
 
 /* The title of the command to play test beeps */
-"Play Test Beeps" = "Play Test Beeps";
+"Play Test Beeps" = "Test Bip Sesi Çal";
 
 /* Progress message for play test beeps. */
-"Play Test Beeps…" = "Play Test Beeps…";
+"Play Test Beeps…" = "Test Bip Sesi Çal…";
 
 /* The title of the cell showing the pod pm version */
-"PM Version" = "PM Version";
+"PM Version" = "PM Sürümü";
 
 /* Label describing pod age view */
-"Pod Age" = "Pod Age";
+"Pod Age" = "Pod Yaşı";
 
 /* Title of the pod settings view controller */
-"Pod Settings" = "Pod Settings";
+"Pod Settings" = "Pod Ayarları";
 
 /* The text of the loading label when pod is primed */
-"Primed" = "Primed";
+"Primed" = "Hazırlandı";
 
 /* The text of the loading label when priming */
-"Priming…" = "Priming…";
+"Priming…" = "Hazırlanıyor…";
 
 /* Label describing time remaining view */
-"Remaining" = "Remaining";
+"Remaining" = "Geri Kalan";
 
 /* Label indicating pod replacement necessary
    The title of the command to replace pod */
-"Replace Pod" = "Replace Pod";
+"Replace Pod" = "Pod'u değiştir";
 
 /* The title of the command to replace pod when there is a pod fault */
-"Replace Pod Now" = "Replace Pod Now";
+"Replace Pod Now" = "Pod'u şimdi değiştir";
 
 /* The title of the cell showing reservoir status */
-"Reservoir" = "Reservoir";
+"Reservoir" = "Rezervuar";
 
 /* Button title for retrying pod deactivation */
-"Retry Pod Deactivation" = "Retry Pod Deactivation";
+"Retry Pod Deactivation" = "Pod Devre Dışı Bırakmayı Tekrar Dene";
 
 /* Title of button to save delivery limit settings
    Title of button to sync basal profile when no pod paired */
-"Save" = "Save";
+"Save" = "Kaydet";
 
 /* The detail text of the basal row when pod is running scheduled basal */
 "Schedule" = "Zamanlama";
 
 /* The title of the status section in settings */
-"Status" = "Status";
+"Status" = "Durum";
 
 /* A message indicating a command succeeded */
-"Succeeded" = "Succeeded";
+"Succeeded" = "Başarılı oldu";
 
 /* The detail text of the basal row when pod is suspended */
 "Suspended" = "Askıya Alındı";
 
 /* Title text for the button to delete Omnipod PumpManager */
-"Switch from Omnipod Pumps" = "Switch from Omnipod Pumps";
+"Switch from Omnipod Pumps" = "Omnipod'u kullanmayı bırak";
 
 /* Title of button to sync basal profile from pod */
-"Sync With Pod" = "Sync With Pod";
+"Sync With Pod" = "Pod'la eşitle";
 
 /* The title of the command to run the test command */
-"Test Command" = "Test Command";
+"Test Command" = "Komut dene";
 
 /* Progress message for testing commands. */
-"Testing Commands…" = "Testing Commands…";
+"Testing Commands…" = "Komutlar deneniyor…";
 
 /* The error message shown when Loop's basal schedule has more entries than the pod can support */
-"Too many entries" = "Too many entries";
+"Too many entries" = "Çok fazla sayıda giriş";
 
 /* Instructions when pod cannot be deactivated */
-"Unable to deactivate pod. Please continue and pair a new one." = "Unable to deactivate pod. Please continue and pair a new one.";
+"Unable to deactivate pod. Please continue and pair a new one." = "Pod devre dışı bırakılamıyor. Lütfen devam edin ve yeni bir tanesi ile eşleştirin.";
 
 /* The detail text for delivered insulin when no measurement is available */
-"Unknown" = "Unknown";
+"Unknown" = "Bilinmiyor";

Dependencies/rileylink_ios/OmniKitUI/uk.lproj/Localizable.strings

@@ -35,9 +35,6 @@
 /* The title of the cell showing the pod activated at time */
 "Active Time" = "Активний час";
 
-/* The title of the cell showing the Pod Active Clock */
-"Pod Active Clock" = "Активний POD годин";
-
 /* The title of the cell showing alarm status */
 "Alarms" = "Тривога";
 
@@ -71,9 +68,6 @@
 /* The title of the configuration section in settings */
 "Configuration" = "Налаштування";
 
-/* The title of the Insulin Type */
-"Insulin Type" = "Тип інсуліну";
-
 /* The title of the continue action in an action sheet */
 "Continue" = "Продовжити";
 
@@ -105,18 +99,6 @@
 /* The alert title for enable bolus beeps error */
 "Error enabling bolus beeps" = "Помилка увімкнення bolus біп";
 
-/* The alert title for enable Confirmation Beeps */
-"Enable Confirmation Beeps" = "Увімкнути Біп підтвердження";
-
-/* The alert title for Disable Confirmation Beep */
-"Disable Confirmation Beeps" = "Вимкнути Біп підтвердження";
-
-/* The alert title for enable Automatic Bolus Beeps */
-"Enable Automatic Bolus Beeps" = "Увімкнути автоматичні звуки для болюсу";
-
-/* The alert title for Disable Automatic Bolus Beeps */
-"Disable Automatic Bolus Beeps" = "Вимкнути авт звуки для болюсу";
-
 /* The alert title for a resume error */
 "Error Resuming" = "Помилка при відновленні";
 
@@ -247,15 +229,3 @@
 
 /* The detail text for delivered insulin when no measurement is available */
 "Unknown" = "Невідомий";
-
-/* The title of the diagnostics section in settings */
-"Diagnostics" = "Діагностика";
-
-/* The diagnostic command Read Pod Status */
-"Read Pod Status" = "Читати статус POD";
-
-/* The diagnostic command Read Pulse Log */
-"Read Pulse Log" = "Читати журнал подій";
-
-/* The title of the pod details section in settings */
-"Pod Details" = "Деталі POD";

Dependencies/rileylink_ios/OmniKitUI/zh-Hans.lproj/Localizable.strings

@@ -1,5 +1,5 @@
 /* Accessibility format string for (1: localized volume)(2: time) */
-"%1$@ units remaining at %2$@" = "%1$@ units remaining at %2$@";
+"%1$@ units remaining at %2$@" = "在%2$@还剩余%1$@";
 
 /* The format string for displaying an offset from a time zone: (1: GMT)(2: -)(3: 4:00) */
 "%1$@%2$@%3$@" = "%1$@%2$@%3$@";
@@ -15,7 +15,7 @@
 "%@ U (Finished)" = "%@ U (已输注)";
 
 /* Format string for bolus progress. (1: The delivered amount) (2: The programmed amount) (3: the percent progress) */
-"%@ U of %@ U (%@)" = "%1$@ U of %2$@ U (%3$@)";
+"%@ U of %@ U (%@)" = "%1$@ U%2$@ U (%3$@)";
 
 /* Format string for temp basal rate. (1: The localized amount) */
 "%@ U/hour" = "%@ U/小时";
@@ -24,7 +24,7 @@
 "%@%%" = "%@%%";
 
 /* Format string for reservoir reading when above or equal to maximum reading. (1: The localized amount) */
-"%@+ U" = "%@+ U";
+"%@+ U" = "%@ + U";
 
 /* Appends a full-stop to a statement */
 "%@." = "%@.";
@@ -118,10 +118,10 @@
 "Fault" = "错误";
 
 /* The title of the command to finish pod setup */
-"Finish pod setup" = "完成设置";
+"Finish pod setup" = "完成Pod设置";
 
 /* Accessibility format string for (1: localized volume)(2: time) */
-"Greater than %1$@ units remaining at %2$@" = "";
+"Greater than %1$@ units remaining at %2$@" = "在%2$@ 还有%1$@ 单位剩余";
 
 /* Instructions when deactivating pod that has been paired, but not attached. */
 "Incompletely set up pod must be deactivated before pairing with a new one. Please deactivate and discard pod." = "Pod设置失败，请解除该从身体移除Pod,然后配对新Pod";

Dependencies/rileylink_ios/RileyLinkKitUI/ar.lproj/Localizable.strings

@@ -0,0 +1,41 @@
+/* The title of the section describing commands */
+"Commands" = "Commands";
+
+/* The connected state */
+"Connected" = "Connected";
+
+/* The in-progress connecting state */
+"Connecting" = "Connecting";
+
+/* The title of the cell showing BLE connection state */
+"Connection State" = "Connection State";
+
+/* The title of the section describing the device */
+"Device" = "Device";
+
+/* The title of the devices table section in RileyLink settings */
+"Devices" = "Devices";
+
+/* The disconnected state */
+"Disconnected" = "Disconnected";
+
+/* The in-progress disconnecting state */
+"Disconnecting" = "Disconnecting";
+
+/* The title of the cell showing firmware version */
+"Firmware" = "Firmware";
+
+/* The title of the cell showing current rileylink frequency */
+"Frequency" = "Frequency";
+
+/* The title of the cell showing device name */
+"Name" = "Name";
+
+/* RileyLink setup description */
+"RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink allows for communication with the pump over Bluetooth Low Energy.";
+
+/* The title of the cell showing BLE signal strength (RSSI) */
+"Signal Strength" = "Signal Strength";
+
+/* The title of the cell showing uptime */
+"Uptime" = "Uptime";

Dependencies/rileylink_ios/RileyLinkKitUI/ca.lproj/Localizable.strings

@@ -0,0 +1,41 @@
+/* The title of the section describing commands */
+"Commands" = "Commands";
+
+/* The connected state */
+"Connected" = "Connected";
+
+/* The in-progress connecting state */
+"Connecting" = "Connecting";
+
+/* The title of the cell showing BLE connection state */
+"Connection State" = "Connection State";
+
+/* The title of the section describing the device */
+"Device" = "Device";
+
+/* The title of the devices table section in RileyLink settings */
+"Devices" = "Devices";
+
+/* The disconnected state */
+"Disconnected" = "Disconnected";
+
+/* The in-progress disconnecting state */
+"Disconnecting" = "Disconnecting";
+
+/* The title of the cell showing firmware version */
+"Firmware" = "Firmware";
+
+/* The title of the cell showing current rileylink frequency */
+"Frequency" = "Frequency";
+
+/* The title of the cell showing device name */
+"Name" = "Name";
+
+/* RileyLink setup description */
+"RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink allows for communication with the pump over Bluetooth Low Energy.";
+
+/* The title of the cell showing BLE signal strength (RSSI) */
+"Signal Strength" = "Signal Strength";
+
+/* The title of the cell showing uptime */
+"Uptime" = "Uptime";

Dependencies/rileylink_ios/RileyLinkKitUI/de.lproj/Localizable.strings

@@ -20,16 +20,16 @@
 "Disconnected" = "Getrennt";
 
 /* The in-progress disconnecting state */
-"Disconnecting" = "trennen";
+"Disconnecting" = "Trennen";
 
 /* The title of the cell showing firmware version */
 "Firmware" = "Firmware";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "Frequenz";
 
 /* The title of the cell showing device name */
-"Name" = "Nombre";
+"Name" = "Name";
 
 /* RileyLink setup description */
 "RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink ermöglicht Kommunikation zur Pumpe über Bluetooth Low Energy.";
@@ -38,4 +38,4 @@
 "Signal Strength" = "Signalstärke";
 
 /* The title of the cell showing uptime */
-"Uptime" = "Uptime";
+"Uptime" = "Betriebszeit";

Dependencies/rileylink_ios/RileyLinkKitUI/fi.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* The title of the cell showing uptime */
 "Uptime" = "Päällä";
-

Dependencies/rileylink_ios/RileyLinkKitUI/fr.lproj/Localizable.strings

@@ -37,68 +37,5 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Force du signal";
 
-/* The header of the cells showing connection monitoring */
-"Connection Monitoring" = "Supervision";
-
 /* The title of the cell showing uptime */
 "Uptime" = "Temps de fonctionnement";
-
-/* The title of the cell showing battery level */
-"Battery level" = "Niveau de batterie";
-
-/* The title of the cell showing Voltage */
-"Voltage" = "Voltage (Tension)";
-
-/* "The title of the section for alerts" */
-"Alert" = "Alerte";
-
-/* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "Alerte de batterie faible";
-
-/* Header of list showing battery level alert options */
-"Battery level Alert" = "Alerte de niveau batterie";
-
-/* Battery level alert OFF in list of options */
-"OFF" = "Désactivé";
-
-/* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "Diagnostic";
-
-/* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "Obtenir les statistiques de RileyLink";
-
-/* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "Inverser la logique des LED";
-
-/* The header of the cells showing test commands */
-"Test Commands" = "Commande de test";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Éclaircir la LED jaune";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Éclaircir la LED rouge";
-
-/* The title of the cell showing Test Vibration */
-"Test Vibration" = "Test de la vibration";
-
-/* The title of the cell for sounding device finding piezo */
-"Find Device" = "Localiser l'appareil";
-
-/* The title of the cell for connection LED */
-"Connection LED" = "Connectez les LED";
-
-/* The title of the cell for connection vibration */
-"Connection Vibration" = "Vibreur de connexion";
-
-/* Detail text when battery alert disabled. */
-"Off" = "Off";
-
-/* Text indicating LED Mode is on */
-"On" = "On";
-
-/* Text indicating LED Mode is off */
-"Off" = "Off";
-
-/* Text indicating LED Mode is auto */
-"Auto" = "Auto";

Dependencies/rileylink_ios/RileyLinkKitUI/it.lproj/Localizable.strings

@@ -26,7 +26,7 @@
 "Firmware" = "Firmware";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "Frequenza";
 
 /* The title of the cell showing device name */
 "Name" = "Nome";
@@ -38,64 +38,4 @@
 "Signal Strength" = "Potenza Segnale";
 
 /* The title of the cell showing uptime */
-"Uptime" = "Uptime";
-
-/* The title of the cell showing battery level */
-"Battery level" = "Livello della batteria";
-
-/* The title of the cell showing Voltage */
-"Voltage" = "Voltaggio";
-
-/* "The title of the section for alerts" */
-"Alert" = "Sveglia";
-
-/* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "Avviso Batteria Bassa";
-
-/* Header of list showing battery level alert options */
-"Battery level Alert" = "Avviso livello batteria";
-
-/* Battery level alert OFF in list of options */
-"OFF" = "SPENTO";
-
-/* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "LED Diagnostici";
-
-/* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "Ottieni Statistiche Di RileyLink";
-
-/* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "Inverti Logica LED";
-
-/* The header of the cells showing test commands */
-"Test Commands" = "Test Commands";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Lighten Yellow LED";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Lighten Red LED";
-
-/* The title of the cell showing Test Vibration */
-"Test Vibration" = "Test Vibration";
-
-/* The title of the cell for sounding device finding piezo */
-"Find Device" = "Find Device";
-
-/* The title of the cell for connection LED */
-"Connection LED" = "Connection LED";
-
-/* The title of the cell for connection vibration */
-"Connection Vibration" = "Connection Vibration";
-
-/* Detail text when battery alert disabled. */
-"Off" = "Off";
-
-/* Text indicating LED Mode is on */
-"On" = "On";
-
-/* Text indicating LED Mode is off */
-"Off" = "Off";
-
-/* Text indicating LED Mode is auto */
-"Auto" = "Auto";
+"Uptime" = "Tempo d'attività";

Dependencies/rileylink_ios/RileyLinkKitUI/nl.lproj/Localizable.strings

@@ -26,7 +26,7 @@
 "Firmware" = "Firmware";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "Frequentie";
 
 /* The title of the cell showing device name */
 "Name" = "Naam";
@@ -38,64 +38,4 @@
 "Signal Strength" = "Signaalsterkte";
 
 /* The title of the cell showing uptime */
-"Uptime" = "Uptime";
-
-/* The title of the cell showing battery level */
-"Battery level" = "Batterijniveau";
-
-/* The title of the cell showing Voltage */
-"Voltage" = "Voltage";
-
-/* "The title of the section for alerts" */
-"Alert" = "Waarschuwing";
-
-/* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "'Lege batterij'-waarschuwing";
-
-/* Header of list showing battery level alert options */
-"Battery level Alert" = "Batterijniveau waarschuwing";
-
-/* Battery level alert OFF in list of options */
-"OFF" = "UIT";
-
-/* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "Diagnostische LEDs";
-
-/* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "RileyLink statistieken";
-
-/* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "LED Logica omkeren";
-
-/* The header of the cells showing test commands */
-"Test Commands" = "Test commando’s";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Zet gele LED aan";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Zet rode LED aan";
-
-/* The title of the cell showing Test Vibration */
-"Test Vibration" = "Test trillen";
-
-/* The title of the cell for sounding device finding piezo */
-"Find Device" = "Apparaat zoeken";
-
-/* The title of the cell for connection LED */
-"Connection LED" = "Verbinding LED";
-
-/* The title of the cell for connection vibration */
-"Connection Vibration" = "Verbinding trillen";
-
-/* Detail text when battery alert disabled. */
-"Off" = "Uit";
-
-/* Text indicating LED Mode is on */
-"On" = "Aan";
-
-/* Text indicating LED Mode is off */
-"Off" = "Uit";
-
-/* Text indicating LED Mode is auto */
-"Auto" = "Auto";
+"Uptime" = "Tijd actief";

Dependencies/rileylink_ios/RileyLinkKitUI/pt-BR.lproj/Localizable.strings

@@ -39,4 +39,3 @@
 
 /* The title of the cell showing uptime */
 "Uptime" = "Tempo de Atividade";
-

Dependencies/rileylink_ios/RileyLinkKitUI/pt-PT.lproj/Localizable.strings

@@ -37,68 +37,5 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Signal Strength";
 
-/* The header of the cells showing connection monitoring */
-"Connection Monitoring" = "Connection Monitoring";
-
 /* The title of the cell showing uptime */
 "Uptime" = "Uptime";
-
-/* The title of the cell showing battery level */
-"Battery level" = "Battery level";
-
-/* The title of the cell showing Voltage */
-"Voltage" = "Voltage";
-
-/* "The title of the section for alerts" */
-"Alert" = "Alert";
-
-/* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "Low Battery Alert";
-
-/* Header of list showing battery level alert options */
-"Battery level Alert" = "Battery level Alert";
-
-/* Battery level alert OFF in list of options */
-"OFF" = "OFF";
-
-/* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "Diagnostic LEDs";
-
-/* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "Get RileyLink Statistics";
-
-/* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "Invert LED Logic";
-
-/* The header of the cells showing test commands */
-"Test Commands" = "Test Commands";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Lighten Yellow LED";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Lighten Red LED";
-
-/* The title of the cell showing Test Vibration */
-"Test Vibration" = "Test Vibration";
-
-/* The title of the cell for sounding device finding piezo */
-"Find Device" = "Find Device";
-
-/* The title of the cell for connection LED */
-"Connection LED" = "Connection LED";
-
-/* The title of the cell for connection vibration */
-"Connection Vibration" = "Connection Vibration";
-
-/* Detail text when battery alert disabled. */
-"Off" = "Off";
-
-/* Text indicating LED Mode is on */
-"On" = "On";
-
-/* Text indicating LED Mode is off */
-"Off" = "Off";
-
-/* Text indicating LED Mode is auto */
-"Auto" = "Auto";

Dependencies/rileylink_ios/RileyLinkKitUI/ru.lproj/Localizable.strings

@@ -26,7 +26,7 @@
 "Firmware" = "Прошивка";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "Частота";
 
 /* The title of the cell showing device name */
 "Name" = "Название";
@@ -38,4 +38,4 @@
 "Signal Strength" = "Уровень сигнала";
 
 /* The title of the cell showing uptime */
-"Uptime" = "Uptime";
+"Uptime" = "Время непрерывной работы";

Dependencies/rileylink_ios/RileyLinkKitUI/sk.lproj/Localizable.strings

@@ -37,68 +37,5 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Sila Signálu";
 
-/* The header of the cells showing connection monitoring */
-"Connection Monitoring" = "Connection Monitoring";
-
 /* The title of the cell showing uptime */
 "Uptime" = "Uptime";
-
-/* The title of the cell showing battery level */
-"Battery level" = "Stav batérie";
-
-/* The title of the cell showing Voltage */
-"Voltage" = "Napätie";
-
-/* "The title of the section for alerts" */
-"Alert" = "Upozornenie";
-
-/* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "Upozornenie Nízky stav Batérie";
-
-/* Header of list showing battery level alert options */
-"Battery level Alert" = "Upozornenie Stavu Batérie";
-
-/* Battery level alert OFF in list of options */
-"OFF" = "VYP";
-
-/* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "Diagnostic LEDs";
-
-/* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "Get RileyLink Statistics";
-
-/* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "Invert LED Logic";
-
-/* The header of the cells showing test commands */
-"Test Commands" = "Testovať Ovládanie";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Lighten Yellow LED";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Lighten Red LED";
-
-/* The title of the cell showing Test Vibration */
-"Test Vibration" = "Testovať Vibrovanie";
-
-/* The title of the cell for sounding device finding piezo */
-"Find Device" = "Nájsť Zariadenie";
-
-/* The title of the cell for connection LED */
-"Connection LED" = "Connection LED";
-
-/* The title of the cell for connection vibration */
-"Connection Vibration" = "Connection Vibration";
-
-/* Detail text when battery alert disabled. */
-"Off" = "Vypnuté";
-
-/* Text indicating LED Mode is on */
-"On" = "Zapnuté";
-
-/* Text indicating LED Mode is off */
-"Off" = "Vypnuté";
-
-/* Text indicating LED Mode is auto */
-"Auto" = "Auto";

Dependencies/rileylink_ios/RileyLinkKitUI/tr.lproj/Localizable.strings

@@ -1,41 +1,41 @@
 /* The title of the section describing commands */
-"Commands" = "Commands";
+"Commands" = "Komutlar";
 
 /* The connected state */
 "Connected" = "Bağlandı";
 
 /* The in-progress connecting state */
-"Connecting" = "Connecting";
+"Connecting" = "Bağlanıyor";
 
 /* The title of the cell showing BLE connection state */
-"Connection State" = "Connection State";
+"Connection State" = "Bağlantı Durumu";
 
 /* The title of the section describing the device */
-"Device" = "Device";
+"Device" = "Cihaz";
 
 /* The title of the devices table section in RileyLink settings */
 "Devices" = "Aygıtlar";
 
 /* The disconnected state */
-"Disconnected" = "Disconnected";
+"Disconnected" = "Bağlantı kesildi";
 
 /* The in-progress disconnecting state */
-"Disconnecting" = "Disconnecting";
+"Disconnecting" = "Bağlantı kesiliyor";
 
 /* The title of the cell showing firmware version */
 "Firmware" = "Aygıt Yazılımı";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "Frekans";
 
 /* The title of the cell showing device name */
 "Name" = "İsim";
 
 /* RileyLink setup description */
-"RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink allows for communication with the pump over Bluetooth Low Energy.";
+"RileyLink allows for communication with the pump over Bluetooth Low Energy." = "RileyLink, Bluetooth Low Energy üzerinden pompa ile iletişime izin verir.";
 
 /* The title of the cell showing BLE signal strength (RSSI) */
-"Signal Strength" = "Signal Strength";
+"Signal Strength" = "Sinyal Gücü";
 
 /* The title of the cell showing uptime */
-"Uptime" = "Uptime";
+"Uptime" = "Çalışma süresi";

Dependencies/rileylink_ios/RileyLinkKitUI/uk.lproj/Localizable.strings

@@ -37,68 +37,5 @@
 /* The title of the cell showing BLE signal strength (RSSI) */
 "Signal Strength" = "Рівень сигналу";
 
-/* The header of the cells showing connection monitoring */
-"Connection Monitoring" = "Підключення до моніторингу";
-
 /* The title of the cell showing uptime */
 "Uptime" = "Час роботи";
-
-/* The title of the cell showing battery level */
-"Battery level" = "Рівень заряду батареї";
-
-/* The title of the cell showing Voltage */
-"Voltage" = "Напруга";
-
-/* "The title of the section for alerts" */
-"Alert" = "Сигнал";
-
-/* The title of the cell showing Low Battery Alert */
-"Low Battery Alert" = "Попередження про низький рівень заряду акумулятора";
-
-/* Header of list showing battery level alert options */
-"Battery level Alert" = "Сповіщення про рівень заряду акумулятора";
-
-/* Battery level alert OFF in list of options */
-"OFF" = "ВИМК";
-
-/* The title of the command to update diagnostic LEDs */
-"Diagnostic LEDs" = "Діагностичні світлодіоди";
-
-/* The title of the command to fetch RileyLink statistics */
-"Get RileyLink Statistics" = "Отримати статистику RileyLink";
-
-/* The title of the command to invert BLE connection LED logic */
-"Invert LED Logic" = "Інвертувати логіку LED";
-
-/* The header of the cells showing test commands */
-"Test Commands" = "Перевірка команд";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Yellow LED" = "Світло-жовтий LED";
-
-/* The title of the cell showing Lighten Yellow LED */
-"Lighten Red LED" = "Світло-червоний LED";
-
-/* The title of the cell showing Test Vibration */
-"Test Vibration" = "Перевірка вібрації";
-
-/* The title of the cell for sounding device finding piezo */
-"Find Device" = "Знайти пристрій";
-
-/* The title of the cell for connection LED */
-"Connection LED" = "Індикатор з’єднання";
-
-/* The title of the cell for connection vibration */
-"Connection Vibration" = "Вібрація з'єднання";
-
-/* Detail text when battery alert disabled. */
-"Off" = "ВИМК.";
-
-/* Text indicating LED Mode is on */
-"On" = "УВІМК.";
-
-/* Text indicating LED Mode is off */
-"Off" = "ВИМК.";
-
-/* Text indicating LED Mode is auto */
-"Auto" = "Аuto";

Dependencies/rileylink_ios/RileyLinkKitUI/zh-Hans.lproj/Localizable.strings

@@ -26,7 +26,7 @@
 "Firmware" = "固件";
 
 /* The title of the cell showing current rileylink frequency */
-"Frequency" = "Frequency";
+"Frequency" = "频段";
 
 /* The title of the cell showing device name */
 "Name" = "设备名称";

FreeAPS/Sources/Localizations/Main/ar.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deactivate Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/ca.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deactivate Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/da.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deaktiver Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/de.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Nachdem Sie Glukosedatensätze in der Health App erstellt oder gelöscht haben, öffnen Sie bitte FreeAPS X, um die Übertragung der geänderten Daten sicher zu gewährleisten";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Fehler";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Pod deaktivieren";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/es.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Desactivar Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/fi.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deaktivoi pumppu";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/fr.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Une fois que vous avez créé des enregistrements de glucose dans l'application Santé, veuillez ouvrir FreeAPS X pour nous aider à garantir le transfert des données";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Erreur";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Désactiver le pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/he.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deactivate Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/it.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Dopo aver creato record glicemici nell'app Salute, apri FreeAPS X per aiutarci a trasferire i dati modificati";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Errore";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Disattiva Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/nb.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Etter at du har lagt til blodsukker i Helse-appen, vennligst åpne FreeAPS X for å sikre overføring av endrede data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Feil";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
-"Attach Pod" = "Attach Pod";
+"Attach Pod" = "Fest pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deaktiver Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/nl.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Na het maken van glucoserecords in de Gezondheid-app, opent u FreeAPS X om ervoor te zorgen dat de gewijzigde gegevens veilig worden overgedragen";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Fout";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deactiveer pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/pl.lproj/Localizable.strings

@@ -951,24 +951,27 @@ Połączono z Nightscout!";
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Dezaktywuj PODa";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/pt-BR.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Informação";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Desativar Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/pt-PT.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deactivate Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/ru.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "После ручного создания записей о глюкозы в программе Здоровье пожалуйста откройте FreeAPS X, чтобы помочь нам гарантированно загрузить измененные данные";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Инфо";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Ошибка";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Деактивировать Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/sk.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Info";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Error";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Deaktivovať Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/tr.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Sağlık uygulamasında glikoz kayıtları oluşturduktan sonra, değiştirilen verileri aktarmayı garanti etmemize yardımcı olmak için lütfen FreeAPS X'i açın";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Bilgi";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Hata";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Pod'u Ekleyin";
 
-/* DASH string */
 "Deactivate Pod" = "Pod'u devredışı bırak";
 
-/* DASH string */
 "Pair Pod" = "Pod Eşleştir";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/uk.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "Після створення записів глюкози в програмі Охорони здоров'я, будь ласка, відкрийте FreeAPS X, щоб допомогти нам гарантувати передачу змінених даних";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "Інформація";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "Помилка";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "Деактивувати POD";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */

FreeAPS/Sources/Localizations/Main/zh-Hans.lproj/Localizable.strings

@@ -949,24 +949,27 @@ Enact a temp Basal or a temp target */
 /* */
 "After you create glucose records in the Health app, please open FreeAPS X to help us guaranteed transfer changed data" = "在您在 Health App中创建血糖记录后，请打开 FreeAPS X，以帮助我们保证传输数据已更改";
 
+/* New ALerts ------------------------- */
+/* Info title */
+"Info" = "信息";
+
+/* Warning title */
+"Warning" = "Varning";
+
+/* Error title */
+"Error" = "错误";
+
 /* ---------------------------------------
- DASH strings
+  DASH strings
 */
-/* DASH string */
-
 "Attach Pod" = "Attach Pod";
 
-/* DASH string */
 "Deactivate Pod" = "解除Pod";
 
-/* DASH string */
 "Pair Pod" = "Pair Pod";
 
 /* --------------------------------------
 
- --------------------------------------------
-
-
   Infotexts from openaps.docs and androidaps.docs
   FreeAPS X
 */